480300
Oxygen cylinder for Turbo set 300.
483200
Disposable Maxy gas cylinder.
483300
Replacement Turbo gas cylinder
for Turbo set 300.
BUL-B1694
Replacement Map Pro Gas
cylinder for Turbo set 300.
Based on a stabilized mixture of methylacetylene (propyne) and propadiene. MAPP gas is safer than acetylene; There is no 15 psi limit and it can to use on board ships and in mines. delivers higher temperatures than propane. Although acetylene has a higher flame temperature (3160 C, 5720 F), MAPP has the advantage that it requires neither dilution nor special container fillers during transport, allowing a greater volume of fuel gas to be transported at the same given weight, and it is much safer in use.
No.1185 With comfortable, flat nylon handle strong enough to withstand rough usage. <CRLF>With standard needle valve. <CRLF>No. 1245 - Designed with robust nylon handle and trigger operated diaphragm valve - pilot flame is quickly obtained by adjusting the cam ring above the trigger; full flame is given by pulling trigger which can be locked in position for continuous burning.<CRLF>No.1340 Specially designed with an immensely strong steel spring handle to stand up to the tough conditions of contractors' use. With standard needle valve.<CRLF>No.1345 Extended Torch Handle Only<CRLF>Extra long handle with arm rest for extra comfort. Standard needle valve. Takes any of the standard burners and can be used in conjunction with the multiple burner adaptors Nos.1122 and 1123. <CRLF>Overall length: 1060mm.
A range of nozzles used in the welding of mild steel using the oxy/acetylene
process and lightweight torch and Welding Mixer available in sizes 1-18.
(Plate thickness refers to mild steel).
Bullfinch 2300 Autotorch handle. Features single lever operation, lever turns on gas and ignites the burner. Releasing the lever shuts off the gas. Incorporated needle valve for flame adjustment.
Integral swivel connector on the inlet 3/8in BSP-LH male union inlet connector.
INTERCHANGEABLE BURNERS AVAILABLE SEPARATELY
Features:
• Easy, one handed, fail-safe operation.
• Lever operated, automatic ignition.
• Seven easy to change burners with snap fit connections.
• Swivel inlet connection.
• No matches, no lighters, easy to light in windy conditions
• More economical in the use of gas
The Sievert Self-Seal Butane & Propane Gas Cartridge is fitted with a threaded self sealing safety valve, ensuring safe and easy removal from the appliance and re-sealing automatically. Gas mixture consists of 35% Propane and 65% Butane for optimum performance. All cartridges comply with EN417 Regulations.
A 200mm bent neck suitable for Acetylene Heating Nozzles. For use with Acetylene mixers only
Heavy duty welding between 1 to 25mm and acetylene cutting to 200mm. For a wide range of oxygen fuel gas processes, using appropriate accessories such as welding mixer and nozzles or with cutting attachment. Made to EN ISO 5172.
The Bullfinch No.1365 Unilow Furnace is robustly designed with a wide low frame that gives great stability and safety. It incorporates an advanced design of air intake adjustment to give a wide range of flames from vigorous to soft - and more precise control of the heat. The burner design prevents jets becoming blocked by spillage, stripping, bbq lighters and tile/label removal.
Fully compatible with most heavy-duty welding shanks including 1144, Saffire 5, 4, 3, Citogas HDT200. Sizes 50 and 100 require A-HT mixer 2012.
The Sievert 2205 Ultra Gas Cartridge has a gas mixture of propane, butane and acetone to give a flame temperature of 2,100C. It also has a foam insert to enable the cartridge to be used upside down for longer periods. The self sealing valve is constructed in two layers for additional safety. Complies with EN417 Regulations.
Sievert high pressure regulator (10kg) with hose failure valve. The pressure regulator has a P.O.L. (Prest-o-Lite) fitting - a fitting used exclusively for flammable gases. 3/8 inch outlet.
Attaches to propane cylinders with 5/8” POL-type valve. G3/8”-19 LH, BSP male gas hose connector. Ideal for roofing burners, blowtorches, ring burners, boiling rings, commercial BBQs, gas space heaters and many other gas appliances with variable gas pressures. Operating pressure range 500 - 4000mbar. Max flow rate 8kg/hr. Use with Silverline Gas Bottle Spanner or other 30mm AF spanner. Compatible with Calor gas and Flogas 3.9kg, 6kg, 11kg, 13kg, 19kg and 47kg. Please consult the relevant manufacturer for other compatible cylinder types.
For use with heavy-duty shank, above, and ANM/PNM nozzles, see next page.
A range of nozzles used in the welding of mild steel using the oxy/acetylene process. For use with lightweight cutting attachments. Plate thickness refers to mild steel.
(Plate thickness refers to mild steel).
The Sievert DN20056X Regulator with adjustable pressure from 0.5-4 bar and a 3/8in BSP connection.
This Campingaz Gas Cartridge contains a mix of Butane/Propane gas and is suitable for use with Campingaz blowlamps and blowtorches. It has a high-security self-sealing valve, meaning it can be easily and safely disconnected and reconnected even when not empty. Compatible with all standard EN417 valve blowlamps. Caution: This Product is Highly Flammable.
Primus standard 8719 Burner - Medium. For use with 8716 and 2195. 16mm diameter. 2.0Kw. For light brazing and copper pipes up to 22mm. Brass construction.
Primus 8720 Pin Point Burner For use with 8716 and 21951 14mm Diameter. 0.75Kw. For light brazing and copper pipes up to 10mm. Brass construction.
The Sievert 306311 Regulator is fitted with an automatic hose failure valve that will shut the gas supply off in the event of a hose failure. With adjustable pressure from 1 to 4 bar with a POL connection. Max Capacity 5-12Kg/H.
The Sievert 8708 Hot Air Burner has been designed for shrinking and paint stripping. It produces a powerful, wind stable hot-air stream. For use with the 253501, 253511 and 253547 Powerjet. Diameter: 38mm.
Campingaz 206 Cartridge Pierceable cartridges can't be disconnected once they've been plugged into an appliance, so they're suitable for more intensive or longer use - they're also our most economical and widely available cartridges.
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
PEL 20S 0989B Gas Control Valve Flame Supervision FSD/FFD
5mm Tubular Nozzle 100.303 from Leister.
For use with Leister hot air guns (all TRIACs and push-fit DIODEs) and suitable for a wide range of work including plastic fabrication, plastic welding, civil engineering/geomembrane, roofing and vinyl flooring applications etc.
Made from precision engineered stainless steel, this nozzle is a Pushfit and is designed to work with the following hand tools:- (plus link back to all hand tools) .
This nozzle also allows the following nozzles to be used:-
106.996 Tacking Nozzle
105.431 3mm Speed Weld Nozzle (air slide)
105.432 4mm Speed Weld Nozzle (air slide)
105.433 5mm Speed Weld Nozzle (air slide)
107.139 4.5 x 12mm Speed Weld Nozzle for fillet welding
107.137 8mm Speed Weld Nozzle for tape welding
106.989 3mm Speed Weld Nozzle (no air slide)
106.990 4mm Speed Weld Nozzle (no air slide)
106.991 5mm Speed Weld Nozzle (no air slide)
106.992 5.7mm Profile A Speed Weld Nozzle (no air slide)
106.993 7mm Profile B Speed Weld Nozzle (no air slide)
107.324 12 x 10mm Sieve Reflector
3mm Round Speed Weld Nozzle 106.989 from Leister.
Made from precision engineered stainless steel, this nozzle is designed to push fit on to 5mm tubular nozzles including the 100.303 (standard end nozzle) for TRIAC, DIODE and LABOR S guns and 5mm tubular nozzle 107.144 for HOT JET S guns.
This nozzle accepts 3mm round welding rods also available from Welwyn Tool Group online in addition to a variety of similar and related nozzles.
Suitable for plastic fabrication, plastic welding, roofing and vinyl flooring applications.
For use with Leister hot air guns (all TRIACs, DIODEs, HOT JET S & LABOR S models) .
This 230v/1550W element 142.717 is an original Leister heating element.
It's designed to fit Leister TRIAC ST 230v, TRIAC AT 230v and older TRIAC BT 230v hot air gun models. Simple to replace. Is also a replacement heating element for Leister IGNITER BM4 1600W 139.231.
Robertshaw 7000 BMVR Unitrol Gas Valve Nat Gas
GoSystem Propanpro Propane Gas Cylinder 400g Higher pressure and hotter flame than mixed gas cartridges Hot stable gas Effective to - 20 degrees C Robust steel cylinder Uses standard CGA600 connection
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Coleman Performance 500 Gas Cartridge 440g Coleman C500 Performance gas cartridge offers 440g (70/30) butane/propane gas mixture in threaded self-sealing cartridge with safety valve. It's compatible with all Coleman resealable appliances.
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Benefits
Precise flame control: Achieve the exact heat output you need for your specific application
Durable construction: Ensures long-lasting performance
Variety of sizes: Offers the perfect nozzle for any job
Cost-effective: Delivers exceptional value for your money
Achieve Precise Heating Control with EWS Acetylene Heating Nozzles
Elevate your metalworking projects with the EWS Acetylene Heating Nozzles, designed for accurate and efficient heating. Whether you're a seasoned welder, a DIY enthusiast, or a professional in automotive repair, plumbing, or HVAC, these nozzles offer the versatility and control you need to get the job done right.
Built to Last: Manufactured with high-quality materials, EWS Acetylene Heating Nozzles are engineered to withstand the demands of even the most challenging projects.
Features
No. 25: Ideal for delicate tasks like brazing, soldering, and intricate metal shaping
No. 50: Perfect for general heating applications, pipe bending, and heat treating
No. 100: Suited for larger-scale projects requiring significant heat input, such as metal removal and heavy-duty heating
Applications
Brazing and soldering
Pipe bending
Heat treating
Loosening seized components
Metal shaping
Paint and rust removal
Thawing frozen pipes
Don't settle for imprecise heating! Invest in EWS Acetylene Heating Nozzles and experience the difference controlled flame control can make in your metalworking projects.