Find Welding, Brazing & Soldering Products

Kit contents:
Metal storage carrier
Oxygen cylinder 110bar -1ltr
Map Pro cylinder
Oxygen pressure reducer with fill gauge
Map Pro pressure reducer with flow gauge
Handgrip with adjusting knob and lance
4 nozzles 63, 100, 250, 315 L/m.
2x 2m hoses with connections
Safety goggles
Lighter
Spanner

480300
Oxygen cylinder for Turbo set 300.
483200
Disposable Maxy gas cylinder.
483300
Replacement Turbo gas cylinder
for Turbo set 300.
BUL-B1694
Replacement Map Pro Gas
cylinder for Turbo set 300.

Silver-Flo 55
55% silver, 21% copper, 22% zinc and 2% tin. Melting range 630 - 660°C. General purpose solder. Complies to BS1845/AG2.
Average length: 600mm.

Based on a stabilized mixture of methylacetylene (propyne) and propadiene. MAPP gas is safer than acetylene; There is no 15 psi limit and it can to use on board ships and in mines. delivers higher temperatures than propane. Although acetylene has a higher flame temperature (3160 C, 5720 F), MAPP has the advantage that it requires neither dilution nor special container fillers during transport, allowing a greater volume of fuel gas to be transported at the same given weight, and it is much safer in use.

Soldering fluid No.3 for clean, positive joint preparation. For tinned materials and copper. Water soluble. High activity flux.
Features and Benefits
• Fast acting to save you time and ensure quality hold
• Economical solution to fasten joints in place
• Available in various sizes to suit your needs

480300
Oxygen cylinder for Turbo set 300.
483200
Disposable Maxy gas cylinder.
483300
Replacement Turbo gas cylinder
for Turbo set 300.
BUL-B1694
Replacement Map Pro Gas
cylinder for Turbo set 300.

Effective flux paste for engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution. Suitable for use with lead and lead free soldering.
Features and Benefits
• Water soluble for easy cleaning after use
• Suitable for lead and lead free soldering for versatility of use

Manufactured and designed to offer complete protection for both operator and equipment, combined with high flow performance and ease of use.
Regulators conform to BS EN ISO 2503 with the gauges conforming to BS EN ISO 5171. The two gauges enable reading of gas pressure and contents for optimum control. Date stamped to show when regulator needs replacing or refurbishing.
• Designed Specifically for side entry cylinders.
• Regulators should be refurbished or replaced every 5 years.
• To Be Used in Conjunction with a Flashback Arrestor

These fluxes are suitable for low temp soldering. Working range 550 - 800°C. The powder is mixed with water to form a paste. Residue is removed in hot water.
Features and Benefits
• Residue can be removed using hot water for easy clean up
• Makes flux paste quickly just by adding water
• Available in two sizes depending on your needs
Typical Applications
• Soldering
Standards
• Complies with DIN 8511 FSH-2 and EN1045 FH10

Precision engineered for single cylinder applications and designed for every day use, these two gauge regulators are ideal for ensuring you achieve the best results when welding. Selecting the correct welding regulator is crucial to the achieving optimum welding quality and control, as various metals possess different flow rates. The two gauges enable reading of gas pressure and contents for optimum control. Possesses a bottom entry design and is suited for use with top outlet cylinder valves. Each product is date stamped to show when regulator needs replacing or refurbishing, as each regulator should be refurbished or replaced every 5 years. To be used in conjunction with a flashback arrestor (sold separately).
Features and Benefits
• Possesses two gauges for you to easily read the pressure levels when welding
• Easy to affix to your oxygen cylinder due to the bottom entry design
• Manufactured with precision to ensure high quality accuracy and results
Typical Applications
• Ideal for use when controlling and regulating the flow of oxygen in a singular cylinder whilst welding
• Suited for use with top outlet cylinder valves
Standards
• Regulators and gauges conform to 2014/68/EU (PED)

The Weller 30W LED Halo Ring Soldering Iron offers 360 illumination of focused, bright light to aid visibility of the workpiece, ensuring high-quality solder joints. Fitted with an ergonomic moulded pencil grip that provides comfort, precision and control. Easily replace worn tips or change tip applications. An integrated safety rest holds the iron when not in use, reducing the risk of injury or damage to the workspace. Specification Voltage 230/240V Input Power 30W Max. Temperature 427C Tip Conical 0.8mm Cord Length 1.5m Weight 293g

The Antex® XS25 230V soldering iron is ideal for all general soldering applications. Possessing a nominal power of 25 watts, a long-life iron plated bit and a cool touch ergonomic handle, the product is complete with a power cable and UK plug.
Features and Benefits
• Inner ceramic shaft provides almost perfect insulation for user protection and superior results
• Supplied with a PVC cable and UK plug to allow you to get started immediately
• Cool touch handle is guaranteed to stay cool for user comfort and safety when soldering
• Replacement tips are available to keep your tool working to an optimum level
Typical Applications
• Soldering
• Institutional
• Industrial
Standards
• CE marked

480300
Oxygen cylinder for Turbo set 300.
483200
Disposable Maxy gas cylinder.
483300
Replacement Turbo gas cylinder
for Turbo set 300.
BUL-B1694
Replacement Map Pro Gas
cylinder for Turbo set 300.

Whether water or air cooled, all Kennedy® TIG torches are lightweight and durable. Each product possesses a silicone rubber rigid or flexible head moulding and is made from tough ABS plastic with a silicone rubber head for greater heat resistance and durability.
Features and Benefits
• Each body is lightweight and durable making them easy to wield
• Manufactured from ABS plastic which is highly robust
• Silicone rubber head gives greater heat resistance for product longevity
• Available with either rigid or flexible head mouldings to suit your needs
Typical Applications
• TIG Welding

Designed with 2 gauges to indicate cylinder contents and outlet pressure.
Argon regulator outlet gauge is calibrated for
flow 0 - 35lpm. Acetylene regulator has a
calibrated flow rate
of 0 - 1.5 bar
with a full
250 bar
capacity.
Features:
Flow rates up to
80m3/h
(2824 ft3/h)
300 bar
capability.
Features
2 gauges
displaying
cylinder contents
and pressure.
Bottom entry design suited
for top outlet cylinder valves.
Fitted with 1/4? parallel threaded gauges.
Fitted with standard 3/8? BSP outlet.
Fitted with 5/8? BSP inlet connections.

The ProSolve Chrome Wardrobe Rail Centre Hanging Bracket 19mm fittings are widely utilised in both commercial and domestic markets for a wide variety of uses but especially in the manufacturing of furniture for garment hanging.<CRLF>PRODUCT FEATURES<CRLF>Colour: Chrome<CRLF>These bracket is used for bring in extra support in the middle of tube.<CRLF>Prevents the tube from bowing.

These Spark Lighters are the ideal solution for the easy and rapid ignition of welding and cutting torches.
Features and Benefits
• Durable metal body for longevity
• Uses cost-effective standard cigarette lighter flints
Applications
• Gas welding
• Cutting
Warnings
• Head-on ignition of nozzles can be dangerous. Always light at a 90° perpendicular angle to the nozzle

Gold Plus tungsten electrodes contain a minimum of 97.80% tungsten and 1.30 to 1.70% lanthanum. Gold Plus electrodes work well on AC or DC welding and can maintain a sharpened point. These products can be used to replace both ceriated and thoriated because, unlike thoriated tungsten, these electrodes are suitable for AC welding and, like ceriated electrodes, they allow for lower voltage arcs.
Features and Benefits
• Excellent arc starting ability to allow for quick and precise working
• Possesses a low burn off rate to ensure there is no wastage of your material
• Good arc stability and excellent re-ignition characteristics
• Can replace both ceriated and thoriated electrodes making it a versatile product
Typical Applications
• Ideal for use when welding titanium alloys, copper alloys, non-corroding steel and nickel alloys

All-round, general purpose rutile cellulosic electrode for thin to medium thick plates particulary suitable for vertical-down welding. Good striking and restriking properties, suitable for tack welding. Useful for bridging gaps.

For the treatment of corrosion on stainless steel and nickel alloys prior to welding. Brush not supplied.

This 60W soldering iron kit possesses a unique 360° Halo Ring™ LED light to provide optimum working conditions. Supplied with a 6.4mm chisel tip as well as other sizes and types of tips, a 1.5 metre power cable with UK plug, the product allows you to begin working quickly. The product also boasts an ergonomic moulded pencil grip, a quick change tip action and integrated safety holds.
Features and Benefits
• High visibility 360° LED Halo Ring™ light to effectively illuminate your workpiece for precision results
• Ergonomic pencil grip handle allows you to solder with bolstered control
• Quick tip change action allows you to quickly replace worn tips or switch types for varying applications (spare tips sold separately)
• Versatile design allows you to use various shaped tips with the soldering iron
• Integrated safety rest holds the iron in place when not using for user safety and protection of the workpiece
• Supplied with various shape and sized tips for a wide scope of use
Typical Applications
• Electronics
• Joining Wires
• Drone Reairs
• Audio Repair

Available in a 6'0" x 6'0" and 8" x 6" size, these green, flame retardant fibreglass curtains are the ideal way to keep you safe whilst welding at high temperatures. They can be hung from SWP curtain frames (sold separately).
Features and Benefits
• Manufactured from a tested, flame retardant canvas to protect you whilst working
• Available in two sizes to ensure you choose the product that best suits your needs
Typical Applications
• Ideal for hanging from welding curtain frames in order to protect yourself and others whilst welding at high temperatures

Available as conical, tapered or cylindrical, this range of MB style gas nozzles are ideal for use in MIG welding. All products are manufactured to Abicor Binzel's professional standard with an emphasis on ensuring quality welding results. All products are also compatible with Kennedy and Parweld MB style torches.
Features and Benefits
• Available in a variety of specifications to suit varying MB style MIG welding torches
• Crucial in the maintenance of a healthy MIG welding torch
• Bolsters the life span of your torch and enables you to continue welding at a high standard
Typical Applications
• Ideal for replacing older gas nozzles on MB style MIG welding torches

Flashback arrestors are designed to offer complete protection, for both operator and equipment. Manufactured to offer the highest standard in safety &amp; protection Both products feature a large sintered element coupled with non return valve as well as a thermal cut off valve which will activate when the heat sensitive element reaches 100°C for optimum safety. Available in two specifications.
Features and Benefits
• It is recommended that each flashback arrestor hould be refurbished or replaced every 5 years to ensure your safety
• Annual inspection is recommended in line with CP7 to keep you working at an optimum level
• Possesses a 3/8in. BSP gas regulator fitting and 3/8in BSP gas hose fitting to fit with most accessories
• Boasts several safety elements including a flame arresting sintered element, gas non return valve and temperature sensitive cut off valve to prevent combustion, overheating and injuries whilst working
Typical Applications
• Gas Welding
Standards
• ISO 5175
• EN 730-1
Notes
• Product CTL8842811B possesses a right handed thread and is suited for use with Oxygen
• Product CTL8842810A has a left handed thread and is suited for use with acetylene and propane

To complete an arc welding circuit, a return current lead must be used to securely connect the workpiece and the power source. Also known as
work return clamps, this range from SWP® is versatile and comes in three varying specifications to suit your needs.
Features and Benefits
• Available in three specifications to suit your requirements
• Manufactured to SWP®'s high standards and made with their expertise
• Available as either a crocodile style (-7083K and -7084L) or a screw-on type (-7082J) depending on your needs
Typical Applications
• ARC Welding

Silver-Flo 55
55% silver, 21% copper, 22% zinc and 2% tin. Melting range 630 - 660°C. General purpose solder. Complies to BS1845/AG2.
Average length: 600mm.

Binzel Spares

Silver-Flo 55
55% silver, 21% copper, 22% zinc and 2% tin. Melting range 630 - 660°C. General purpose solder. Complies to BS1845/AG2.
Average length: 600mm.

Fits gas bottle valves. Drop forged.

Suited for the continued maintenance of any Oxy/Fuel cutting equipment such as gas nozzles, this handy, compact set of reamers and a file is perfect for cleaning the holes in an oxy/fuel gas cutting or welding nozzle. Supplied in a vibrant red flip-out case.
Features and Benefits
• Ideal way of keeping your gas nozzles working to an optimum level
• Compact design ensures the product does not take up space in your tool kit
• Flip out case allows you to keep the reamers and files tidy when not in use
Typical Applications
• Gas Welding
• Gas Nozzle Cleaning

An open head electrode holder with a fully insulated head and handle.
•Overall length: 250mm
•60% duty cycle at 310A
•35% duty cycle at 400A

KEY FEATURES • Manufactured to BS2901.<CRLF>STANDARDS • AWS AS.18 • AWS70S-6 • AS.18 MECHANICAL PROPERTIES (ALL WELD MATERIAL) Temperature 30°C Yield Strength rp 0.2 485 N/mm2 Tensile Strength rm 575 N/mm2 Elongation a5 27.5% Impact Energy isO-V 91 J

Fryolux solder paint is ideally suited to tinning and sweating a variety of materials. The paint should be applied by brush or spray to clean dry surfaces which are in a cold state.

No.1185 With comfortable, flat nylon handle strong enough to withstand rough usage. <CRLF>With standard needle valve. <CRLF>No. 1245 - Designed with robust nylon handle and trigger operated diaphragm valve - pilot flame is quickly obtained by adjusting the cam ring above the trigger; full flame is given by pulling trigger which can be locked in position for continuous burning.<CRLF>No.1340 Specially designed with an immensely strong steel spring handle to stand up to the tough conditions of contractors' use. With standard needle valve.<CRLF>No.1345 Extended Torch Handle Only<CRLF>Extra long handle with arm rest for extra comfort. Standard needle valve. Takes any of the standard burners and can be used in conjunction with the multiple burner adaptors Nos.1122 and 1123. <CRLF>Overall length: 1060mm.

This range of general purpose electrodes are ideal for welding both mild and medium tensile steels. With an easy-striking action, each product has the ability to hold a stable arc with self-releasing slag for excellent shape and finish of the weld seam. Available in various diameters to match your needs and manufactured to both ABS and Lloyds certifications.
Features and Benefits:
• Can be used in all positional welding making them highly versatile
• Operational with both AC and DC power sources
• Available in a host of diameters depending on your requirements
• Rutile coating encourages smooth arc ignition and operation to ensure a neat join
Typical Applications
• Ideal for producing quality welds and joins on medium tensile steels, mild steel tubes, pipes plate and sheet metal work

To suit all 17/18/26 type TIG torches, these back caps are designed to put pressure on the collet holding the electrode whilst welding, in order to reduce the risk of the electrode shorting out.
Features and Benefits
• Aids in preventing the tungsten electrode from shorting out
• Available in two sizes to suit your needs
• Simple yet effective insulator to hold the electrode in place whilst welding
Typical Applications
• TIG welding
Notes
• Please note images of products are for representation purposes only. Whilst every care is taken to provide accurate images of products, actual products may differ slightly

For use with canvas and PVC welders curtains. Rings supplied separately.

Suited for varying welding applications depending on your choice, Sif® welding flux is ideal for preventing oxidation when welding as well as for cleaning materials as you weld. Sif®'s Aluminium Flux is designed for gas welding of aluminium and aluminium alloys, the Bronze Flux is suited for general purpose brazing flux for silicon bronze rods and Sif®s Silver Solder Flux is for silver brazing operation. 600°C to 800°C.<CRLF><CRLF>Features and Benefits<CRLF>• Available in a variety of specifications to suit your requirements<CRLF>• Supplied in a resealable tub to allow you to keep the product protected when not in use<CRLF><CRLF>Typical Applications<CRLF>• Brazing<CRLF>• Gas Welding

Also compatible with Binzel Torches. Various specifications of accessories to fit MIG torches.
Features and Benefits
• Manufactured with maximum wall thickness to provide superior product longevity
• Compatible with a wide range of MIG torches for product versatility
Typical Applications
• MIG Welding

These SI Series soldering irons are suited for heavy duty use. Possesing an rgonomically designed triangular section handle, each product is supplied with a 3-pin plug and a replaceable nickel-plated copper tip. Heavy duty soldering iron for the professional user and light industrial use.
Features and Benefits
• Supplied with a UK 3 pin plug
• Handles are ergonomically designed to maximise user comfort
• Bent nickel plated copper tip is highly durable and fully replaceable to keep your tool operating correctly
• Suited for heavy duty applications such as soldering sheet metal
• Available in two specifications to suit your needs
Typical Applications
• Soldering

The water pattern of these guns is adjustable from a fine spray to a concentrated jet by means of a stainless steel handle. These water guns are strong, reliable and very diverse.
Ideal for industrial water applications requiring a highly efficient washdown facility such as factories, garages and abattoirs.

The Sievert Handyjet is a versatile torch designed for various applications, including soldering, paint stripping, de-icing, and cooking. Featuring a preheating tube for efficient gas combustion, it consumes 140g/hour from the 300ml cartridge. With superior flame adjustment, an ergonomic grip for extended use, and a 20mm diameter burner for precise application, it offers both functionality and comfort. Weighing only 0.728 kg, it provides lightweight portability, and with drop protection, it ensures maximum safety, durability, and affordability for a wide range of tasks.
Features and Benefits
• Anti-flare
• Powerful, efficient and windstable multi-purpose burner
• Drop protection for maximum safety and durability
• Ergonomic comfort grip
• Piezo ignition and new superior flame adjustment valve

The ROTHENBERGER Super-Fire 2 soldering and brazing torch is the result of many years experience and provides the highest standards in concentrating high temperature for fast and effective soldering and brazing in the plumbing, heating, refrigeration, air conditioning and associated trades:
Instant automatic ignition
Guaranteed anti-flare
Long life piezo ignitor
Solid die cast torch body
Fine filtered jet
Professional performance
Works in any position - even upside down

Suitable for PRO/ECR/WP17, 18, 26

This range of Dinse plugs and sockets has a positive locking connection, to prevent accidental disconnection and good external insulation to prevent water penetrating the joint. Dinse compatible panel sockets and machine/surface mounted plugs and sockets also available.
Features and Benefits
• Positive locking connection ensures a firm connection between the welding machine and cable
• External insulation prevents water from penetrating the joint to therefore boost user safety
• Available in a rang of sizes as well as different product types including Dinse Plug or Dinse Sockets depending on your needs
Typical Applications
• ARC Welding

Can be used in AC or DC processes. Excellent arc starts at low amperages, popular in such applications as orbital tube and pipe manufacturing, thin sheet metal work or jobs where small and delicate parts are welded. Like Thoriated elctrodes, they are best used to weld carbon and stainless steels, nickel alloys and titanium. Suitable for WP17, 18 & 26 Tig torches.
Contents;
5X 1.6mm Collets
5X 1.6mm Collet bodies
5X 2.4mm Collets
5X 2.4mm Collet bodies
2X No 4 Ceramic Cups
2X No 5 Ceramic Cups
2X No 6 Ceramic Cups
2X No 7 Ceramic Cups
2X No 8 Ceramic Cups
1X Long Back Cap
1X Short Back Cap
1X 1.6mm Ceriated Grey Tungsten Electrode
1X 2.4mm Ceriated Grey Tungsten Electrode

Multi stage regulators are designed to be used where constant pressure and flows are critical.
Features and Benefits:
•Once set, the outlet pressure and flow rate remain constant until the gas source is interrupted or when the cylinder empties

A basic coated hydrogen controlled MMA electrode for all positional welding of Carbon and Manganese steels giving a good cosmetic finish to mild steel welds. Available in three sizes to suit your needs.
Features and Benefits
• All positional construction makes for a versatile product
• Low hydrogen potassium iron powder coating
• Low temperature properties down to -30°C
• Low Spatter ensures a smooth finish when welding
• Smooth, stable quiet arc for neat joints
• Good penetration ensures strength of joints and offers a firm hold
• Double deoxidisers manganese and silicon to help weld through certain levels of dirt, debris or mill scale that can be commonly found on structural steel
Typical Applications
• Steel plate structural steel
• Pipework and forgings
• Ideal for repair of castings of machinery
• Used where rutile deposits may be at rick of cracking
•Ideal for construction of pressure vessels and structural fabrication work requiring charpy impact properties at sub zero temperatures such as BS 1501-LT 30 boiler plate and BS4360 and grade 50D structural steel
Standards
• Conforms with AWS and BS EN standards

Multi-purpose Sif® bronze low temperature rod for brazing and bronze welding of steels, cast iron, copper and its alloys. Ideally suited for general mild steel work, galvanised steel and dissimilar metal applications, the product is available ina range of sizes to suit your applications.
Features and Benefits
• General-purpose brazing or bronze welding rod
• Suitable for sheet, tube and extruded sections in all types of fabrication work
• For steel, cast iron, copper and its alloys
• Available in a range of sizes to suit your requirements
Typical Applications
• Gas Welding
Standards
• EN 1044: CU302
• BS 1845: CZ6A 1453 C2

Stainless steel filler rod suitable for welding 18/8 (304) austenitic stainless steels, providing good corrosion and wear resistance.
Features and Benefits:
■ Good corrosion and wear resistance
■ Excellent resistance to general and intergranular corrosion up to 350°
■ good resistance to oxidising acids and cold reducing acids.
Typical Applications:
■ ship building and offshore engineering
■ Pressure vessel and boiler industry
■ Construction work, repair and maintenance
■ Food processing industry,
■ Refrigeration
■ petrochemical industry

Supplied with a 10mm chisel tip attached as well as other types and sizes of tips, 1.5 metre power cable and UK plug, this 80W Soldering Iron Kit is ideal for a wide range of soldering applications such as stained glass, electronics and general home repairs. Boasting a Power Grip, various soldering tips and a quick change tip action, the product has an emphasis on quality soldering results and comfort in use.
Features and Benefits
• Secure, firm and ergonomic Power Grip provides the best in class control, grip and precision when using
• Versatile product can be used with any of the supplied soldering tips for a wide scope of use
• Quick tip change action gets you working quickly even when changing tips

TheGYS Dual-gas Blow Torch Kitis suitable for welding most thin metals. It covers a wide range of uses:micro welding (jewellery) , assembly of thin sheet metal, cutting thin sheet metal.Contains:1 x Pressure Reducer, 1 x Anitflashback Valves, 1 x 1.5m Hose, 1 x Torch with 2 tips (0.5 0.65mm) ,1 x Goggles, 1 x Case, 1 x Oxygen Cylinder and1 x Novacet Cylinder.

Suitable for MIG/MAG Welders. Supplied Separately.

A high quality soldering iron stand. This stand is suitable for all yellow Antex irons: M, C, G, CS, XS, TCS, TC25, TC50, SD50. Not suitable for HP40-HP100. Can be fastened to workbench for added security.

Fits all Kennedy 17 & 26 series air cooled torches and 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17, DB18 and DB 26 torches, along with the Weldcraft WP-17, WP-18 and WP-26 torches. With a 50mm length and a 2.4mm bore size, the product is suited for use with 2.4mm tungsten electrodes.
Features and Benefits
• Simple yet effective way of achieving clean results when welding
• Fits several brands and styles of torch for true versatility of use
• Manufactured with Binzel®'s expertise and quality
Typical Applications
• TIG Welding
Notes
• Suited for use with Kennedy® 17 & 26 series air cooled torches as well as the 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17, DB18 and DB 26 torches, along with the Weldcraft WP-17, WP-18 and WP-26 torches

A staple of any welding torch, these MB Style contact tips are compatible with all MB style MIG Torches including Kennedy, Abicor Binzel and Parweld. Available in various specifications and sizes to match individual needs, each product has been manufactured with Abicor Binzel's emphasis on safety, quality and functionality.
Features and Benefits
• MB wear parts boast overall product longevity and optimum performance over time
• Available as standard E-Cu, heavy duty Cu Cr Zr and E-Cu aluminium to suit your personal needs
• Suited to varying MB torches to ensure there is a product that matches your tool
• Cost efficient way of making sure your tool works efficiently over time
Typical Applications
• To be used with MB style MIG torch to transfer the current and guide the wire whilst welding

Gas shielded, deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coated, double deoxidised with manganese and silicon with good mechanical properties. For use with CO2 and AR-CO2. Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1. For welding mild steel and C-Mn steel.
*Supplied in a 15kg drum.
**1.0mm supplied in an 18kg drum.

This earth clamp is robustly constructed from substantial castings and is suitable for up to 600 amps.
Features and Benefits
• The screw lever allows maximum compression to the workpiece
Typical Applications
• ARC Welding

Torches assembled with hose, regulators and burners for immediate use. No 110B (Butane) - Contents: Handle No 1185, Burner No 1230, Tinyreg No 1040, 2.75m (9ft), HP hose No 1299, 'O' clips No 1324. No 110P (Propane) - Contents: Handle No 1185, Burner No 1230, Tinyreg No 1041, 2.75m (9ft), HP hose No 1299, Two 'O' clips No 1324. No. 140P - (Propane)Contents: Handle No 1340, Burner No 1230, Tinyreg variable regulator No 1051, 2.75m (9ft), HP hose No 1299, Two 'O' clips No 1324. No 135 Extended Torch Kit (Propane) - Contents: Handle No 1345, Trident burner adaptor No 1123, Three Standard burners No 1260.

A blocked MIG torch lining can very often be the cause of annoying wire feed problems with your machine. Copper particles from the coating of the MIG wire, surface rust and general workshop dust can soon cause blockages and start to cause problematic wire feed. Purchasing and replacing your torch liner regularly combats this problem and ensures a smooth operation. Available in a range of specifications to suit your needs, the products are suited for use with steel wire.
Features and Benefits
• Inexpensive and easy to fit, the liner should be replaced periodically to ensure a smooth wire feed
• Fully compatible with most Binzel® style Euro-Torches
• Available in a variety of specifications to suit your needs
• PVC coating is hard wearing and highly protective
Typical Applications
• MIG Welding

A range of nozzles used in the welding of mild steel using the oxy/acetylene
process and lightweight torch and Welding Mixer available in sizes 1-18.
(Plate thickness refers to mild steel).

A low-carbon mild steel rod ideal for all types of mild steel and wrought iron welding. It is free-flowing and produces a high strength ductile weld. It is copper coated to ensure long shelf life.
Characteristics:
■ A low-carbon mild steel rod ideal for all types of mild steel and wrought iron welding
■ It is free-flowing and produces a high strength ductile weld
■ Copper coated to ensure long shelf life
■ The operating temperature on the workpiece is maximum 350°
Typical Applications:
■ Particularly suitable for sheet metal panels, plates, tubes and fittings
■ Widely used for automobile, heating and ventilation industries

MB GRIP torch series combines progressive technology and quality with optimum ergonomics, enabling trouble-free operation for every application. All torches are cleverly designed to provide precise operation.
Features and Benefits
• Short handle design with "GRIP" for high grip safety and best accessibility
• Soft components on the thumb rest and handle for comfortable handling in extreme conditions
• Optimum cooling extending the torch life
• ABICOR BINZEL central connector saving time on change over
• Short ball joint equipped with optimum movement radius for perfect handling
• UV Resistant
Typical Applications
• MIG Welding
Standards
• EN 90 974-7

Propane Gas Cylinder - 3.5535
Disposable propane gas cylinder. Ideal for jet torch, quick fire, super fire 2 and micro fire.
MAP/Pro Gas Cylinder - 3.5536
Based on a stabilised mixture of methylacetylene (propyne) and propadiene. MAPP gas is safer than acetylene; There is no 15psi limit and it can to use on board ships and in mines. delivers higher temperatures than propane. Although acetylene has a higher flame temperature (3160°C, 5720°F), MAPP has the advantage that it requires neither dilution nor special container fillers during transport, allowing a greater volume of fuel gas to be transported at the same given weight, and it is much safer in use.

The SIP 6ft x 6ft Welding Curtain with Frame is designed from dark green vinyl material to aid protection against welding glare in areas surrounding workstations, and is designed with robust eyelets and easy hanging and handling.
• 6ft (1.8mtr) x 6ft (1.8mtr) large welding curtain
• Comes with heavy-duty yet lightweight plastic frame
• Robust eyelets for easy hanging and added durability
• Manufactured from heavy-duty dark green vinyl material
• Protects surrounding areas from welding glare and sparks
• Ideal for all levels of welding and welding environments
• Convenient and superb value-for-money

Designed to create a seal that prevents unwanted air from entering the back of the TIG torch when welding, these Back Caps are available in a range of sizes and specifications to suit your needs. Depending on the product selected, the caps can be used for either WP9 and WP20 torches, or WP17, WP18 and WP26.
Features and Benefits
• Available in a range of sizes and specifications to suit your needs
• Simple yet effective way of keeping your TIG torch working to an optimum level
Typical Applications
• TIG Welding

Gas lens collets suitable with a variety of TIG welding torches depending on the item.
Features and Benefits
• This provides greater shielding of gases on sensitive materials than standard collet bodies
• Available in a variety of specifications to suit individual needs
Typical Applications
• TIG Welding

Ceramic cups for TIG welding. In various specifications to meet a plethora of requirements.
Features and Benefits
• Ideal with a host of TIG torches to keep your tool working efficiently
• Available in a variety of specifications and sizes to suit a multitude of needs
Typical Applications
• TIG welding

SIFALUMIN No.27 - 5% Magnesium<CRLF>BS 2901 : Part 4 : 1990 5356. (Tig rods). NG6.<CRLF>AWS A/SFA 5-10-92: ER 5356. <CRLF>Suitable for welding a wide range of cast and wrought aluminium alloys containing up to 5% magnesium. Particularly suited to Tig welding (with argon shielding gas).<CRLF><CRLF>All weights approximate.

Crocodile Earth clamps with 5m cable. Conforms to EN 50525-2-11.
Features and Benefits
• Available in various specifications to suit your requirements
• Comes supplied with a 5 metre cable to get you working immediately
Standards
• EN 50525-2-11

Standard TIG Welding Torch Head with flexible neck. Torch Head for a WP9FX tig torch or type 9FX tig torch. eg HW9FX, SR9FX etc
Features and Benefits
• Flexible neck to allow you to reach confined spaces
• Allows you to customise your existing tool part
Typical Applications
• Welding

Contact Tip .040"/1.0mm M8 Cu Cr Zr

Interchangeable tips for use with Kennedy butane soldering tools.
50BW - To Suit BS050 Soldering Iron
75BW - To Suit BS075 Soldering Iron
125BW - To Suit BS125 Soldering Iron

These OVERCORD Z™ general purpose MMA welding electrodes are suitable for structural steel work, workshop and maintenance welding in all positions. With a medium to thick rutile cellulosic coating, the product is available in various sizes to allow you to select the product that best suits your needs.
Features and Benefits
• Easy striking and re-striking action as well as good gap bridging
• Works well even on work-pieces with residuals of paint, rust or zinc
• Self-releasing slag for ease of use
• Can weld even in a vertical down position
• Produces smooth and slightly concave weld beads which blend into the base plate without undercut
Typical Applications
• For steel plate and strip including structural steels and pipework, especially for positional welding under site conditions
Standards
• Conforms to EN ISO 2560-A: E 38 0 RC 1 1, AWS A5.1: E 6013

A reliable, general purpose electrode for manual metal arc welding of carbon steels, carbon manganese steels and fine-grained carbon manganese steels with elevated yield strength
Features and Benefits:
■ H4 R approved.
■ Low diffusible hydrogen to reduce the risk for cold cracking
■ Outstanding low moisture pick up
■ High efficiency bringing productivity
■ Extremely good weldability in vertical up position
■ Exceptional weld appearance
Industries:
■ Civil Construction
■ Energy
■ Industrial and General Fabrication
■ Light Fabrication
■ Marine and Offshore

Strong, glass-filled nylon handle, styled for maximum comfort. Incorporates needle valve and piezo-electric ignitor. Takes any of the burners for Autotorch system 2 (but not for Autotorch brazing system).

No.4041 Brazing (not illustrated). Specially designed propane regulator to BS 3016 giving a 4 bar preset outlet pressure. Robust brass construction. No.330 Low Pressure: Compact low pressure regulator for propane. Conforms to BS 3016. For industrial and domestic use and for use in caravans, boats and camping. Output pressure: 37m bar.

The Handyjet is a multi-purpose tool designed for soldering, paint stripping, de-icing, cooking and a host of other heating applications. The Handyjet possesses a powerful, efficient and windstable multi-purpose burner that has a unique design. The burner is designed with a preheating tube, that heats the gas before combustion, meaning the tool can be used upside down without risk of flare-up.
Features and Benefits
• Piezo ignition and new superior flame adjustment valve
• Anti-flare for ultimate safety and protection
• Drop protection for maximum safety and durability
• Ergonomic comfort grip gives the user comfort and bolstered control
Typical Applications
• Gas Welding
Notes
• Gas not included

Professional welding torch with a fine flame, ideal for lead welding, silver and gold working (615°C). Complete with 8mm Needle point burner, 4m Hose and hose failure valve.

Prolongs the life of gas welding and cutting nozzles. High strength, needle type files housed in an anodised aluminium flip-up pocket case.

Designed specifically for use with Binzel® torches, this range of torch liners are colour-coded to indicate the compatible wire size. Available in various lengths, materials and styles, you can be sure to find a liner that suits your torch.
Features and Benefits
• Simple yet effective way of ensuring your torch is working to an optimum level
• Colour coded for easy selection of liner for your desired wire size
• Available in various sizes and styles to suit your needs and torch model
Typical Applications
• MIG Welding

Designed to hold Tungsten electrodes and transfer current whilst using your TIG torch, these collets are ideal for use on WP17, WP18 and WP26 torches. Available in varying sizes to suit your required wire size, they are crucial in upholding the quality of your TIG welding torch.
Features and Benefits
• An economical way to keep your TIG torch operating to its full potential
• Manufactured to a high standard to ensure a steady current and provide a stable arc needed for precision welding
• Available in various sizes to ensure you find the correct fit for your torch
Typical Applications
• Ideal for use with WP17, WP18 and WP26 TIG welding torches to hold the Tungsten as you weld

These ceramic gas lenses allow yo to weld more complex joints and increases the shielding gas coverage when welding. Each product is designed to suit all 17/18/26 type TIG torches.
Features and Benefits
• Available in a variety of sizes and specifications to best suit your needs
• Suited for Type 17, 18 and 26 TIG torches for versatility
• Can be used for all brands of torch for true breadth of use
Typical Applications
• TIG Welding

Fits onto the nozzle end of the blowpipe, between the head and the cutting nozzle. Offers optimum two-handed control, fitted with a sliding centre device and a roller ball support spigot, ideal for accurately cutting larger diameters. Swing arm is graduated for direct reading of circle diameter (2 x radius). High quality brass head and screws with chrome plated steel swing arm and centre slide.
Compatible with most blowpipes including 1144, 1143, NMC200, NM250, NM400 etc.
Also compatible with cutting attachments.

Sifsteel Stainless 316L
BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L = AWS A/SFA 5-9-93. Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.
All weights approximate.

The Weller WLG940023G Series Soldering Gun has been designed for heavy-duty soldering, cutting and smoothing applications, including those involving heat sinks, ground planes, metal art and plumbing. It offers 6-second heat up and delivers 2 levels of power, both deliver heat up to 480C. When the full 140W power is needed, pull the trigger halfway. When medium 100W power is needed, pull the trigger fully. Its co-moulded pistol grip features a soft, non-slip grip for increased user comfort and control. Specification Voltage 230/240V Input Power 100W/140W Max. Temperature 480C Cord Length 1.5m Weight 1.36kg

Bakers Fluid No.3 is a specially formulated liquid flux ideal for soldering and tinning of copper and tinned materials.Easy to apply.Fast acting and economical in use, ensuring sound strong joints.

Soldering Flux acts as a chemical cleaning agent to remove impurities from joint surfaces when soldering, ensuring a better joint. It has a non-acidic, non-toxic formula, offering fitters the benefits of savings, safety and certainty. WRAS (The Water Regulations Advisory Scheme) approved. Products compliant with this approval are accepted by all water suppliers in the UK.

These silicone mats are ideal for helping to protect and organise your soldering work station. Available in either medium or large, both mats are red in colour and feature placement slots, a built in ruler and four magnetic areas to place your components whilst soldering. The mats are heat resistant up to 500°C and anti-slip in nature.<CRLF><CRLF>Features and Benefits<CRLF>• Clever design also incorporates individual compartments and placement slots for efficient organisation of components whilst you solder<CRLF>• Possesses a built-in ruler and four magnetic areas for secure storage of components<CRLF>• Anti-slip properties increase safety and precision when working<CRLF>• Manufactured from silicone which resists temperatures as high as 930°F/500˚C<CRLF>• Available in two sizes allowing you to select the size that best suits your needs<CRLF><CRLF>Typical Applications<CRLF>• Hobby<CRLF>• Joining Wires<CRLF>• Home/Audio/Drone Repair<CRLF>• Electronics<CRLF>• Engraving and Woodburning<CRLF>• Jewellery

GoSystem Auto Start Gas Blow Torch Stable, powerful fine flame (up to 1600c0 Rapid 1 min warm up - use at any angle. Precise flame control Auto start piezo ignition For use with G2350, 2277or 2175. EN417 cartridge Stability base included Simple and safe to use Safety checked and test burned
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.