Widely used for fixing pipes and cables in all industries.
Manufactured to DIN 72573.
The Kobe air and water hose reels, available in three sizes, are the perfect solution for busy workshops. Designed with an auto layering mechanism to prevent jamming, these reels ensure a seamless and efficient user experience. The hose itself is crafted from durable PU, while the housing is constructed from impact-resistant plastic, ensuring longevity and resilience in demanding environments. With a working pressure of 8 bar (120 PSI) and suitability for water up to 45°C, these hose reels are versatile and reliable. The included 180° pivoting wall bracket allows for easy installation on walls or ceilings, providing flexibility in workspace arrangement. Additionally, the 1/4in. BSP inlet and outlet connections enhance compatibility for various applications.<CRLF><CRLF>Features and Benefits<CRLF>• Can be used for water or air depending on your needs<CRLF>• PU construction is highly durable and resistant to chemicals<CRLF>• Includes a 180° pivoting wall bracket to allow you to mount the product to a wall for convenience<CRLF>• Auto layering mechanism helps to prevent jamming to keep your hose tidy and reducing the risk of damage <CRLF>• Available in three varying sizes to suit your requirements<CRLF><CRLF>Typical Applications<CRLF>• Automotive<CRLF>• Workshops<CRLF>• Gardening<CRLF><CRLF>Standards<CRLF>• BS EN ISO 12100: 2010
High flow capacity. Low cracking pressure: 0.2bar. A wide variation of models.
Compressed air fitting.
This fitting is made of the following components:-
The entire body is produced in acetal copolymer
The 'O'Ring is nitrile rubber
Series A
Directly operated solenoid valve - threaded body.
Connection: 1/8.
Function: 3/2 N.C.
Orifice: 1.5mm Ø.
N.C. = Normally closed
Stop End Blanks
For use on plain pipe. When finishing off open pipes.
Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ‘type A' compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part 1), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.
The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.
The Hozelock three-way Y Connector allows three hoses to be connected, to extend a Hozelock system. Made from the highest quality materials for increase durability, this 3-way connector is great for watering different areas of the garden at one time, and will split a flow of water in two different directions. Connection Type Male.
Brass , Lorch
With the introduction of the European Pressure Equipment Directive, which recommend relevant testing and quality assurance with appropriate certification with regard to safety. This range of safety valves are manufactured and tested in accordance to the regulations (DIN 3320.AD SHEET A2/A4) which meets applicable specifications both nationally and internationally. Compliance with the component test report, by the identification the manufacture provides a guarantee for the specified setting values. Test certificates come as standard. Note: As from April 2002 this product will be CE marked, to comply with new legislation.
1" BSP Taper Male, 90┬░ Equal Elbow, Black, Malleable Iron Fitting, EE
The 06907 Inlet Filter PW11-00600 is designed to enhance the performance and longevity of your equipment by ensuring optimal filtration. This product range is crafted with a focus on quality and reliability, providing essential protection against contaminants that can compromise functionality. By effectively filtering out impurities, these inlet filters contribute to smoother operation and reduced maintenance needs, making them an invaluable addition for those seeking to maintain their machinery in peak condition. Trust in this product range for superior filtration solutions.
Applications:
- Ideal for use in pressure washers to ensure clean water intake, preventing damage to the pump and extending equipment lifespan.
- Suitable for various cleaning tasks, including residential and commercial applications, where maintaining water quality is essential for optimal performance.
Cast Iron Rainwater System (Painted Black)
1/2" BSP Parallel 316 Stainless Steel Strainer Basket for Screwed Spring Check Valves
3/4" BSP Tapered Male, Barrel Nipple, 150lb Tube & Pipe Fitting, 60mm Length, 316 Stainless Steel, Haitima
3/8" BSP Tapered Male, Needle Valve, Brass, Teflon Seal, Maximum Working Pressure 100 bar, FT Pro
90mm Metric Female, Stainless Steel Float Valve, Working Temperature 0┬░C to +150┬░C, Genebre
12mm Outside Diameter x 10mm Inside Diameter, Copper Tubing, Metric, 3 Metre Length, Half Hard to EN12449, 3 Metres, Maximum Working Pressure 1.440 PSI, Air-Pro
1/2" BSP Parallel Female, VIP Axial Flow Valve, Spring Return, Normally Open, Working Temperature -20°C to +80°C, Working Pressure 10 bar, Omal
High quality compression fitting for MDPE pipe. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Wras approved. Simple and quick to connect. WRAS approved
High quality compression fitting for MDPE pipe. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Wras approved. Simple and quick to connect. WRAS approved
Vale Gate Valve Brass<CRLF><CRLF>Brass Vale® gate valve with Industrial Ancillaries. This brass gate valve is manufactured to BS 5154 and is available in thread BSPP sizes 1/4 to 4.
Brass , Lorch
With the introduction of the European Pressure Equipment Directive, which recommend relevant testing and quality assurance with appropriate certification with regard to safety. This range of safety valves are manufactured and tested in accordance to the regulations (DIN 3320.AD SHEET A2/A4) which meets applicable specifications both nationally and internationally. Compliance with the component test report, by the identification the manufacture provides a guarantee for the specified setting values. Test certificates come as standard. Note: As from April 2002 this product will be CE marked, to comply with new legislation.
Brass , Lorch
With the introduction of the European Pressure Equipment Directive, which recommend relevant testing and quality assurance with appropriate certification with regard to safety. This range of safety valves are manufactured and tested in accordance to the regulations (DIN 3320.AD SHEET A2/A4) which meets applicable specifications both nationally and internationally. Compliance with the component test report, by the identification the manufacture provides a guarantee for the specified setting values. Test certificates come as standard. Note: As from April 2002 this product will be CE marked, to comply with new legislation.
Fluidmaster Torbeck Side Entry Fill Valve 1/2" Plastic Shank WRAS approved 1/2" Plastic Shank Side Entry Removable Filter Exceptional Performance at Low Pressure Small Footprint Allows for Fitting Into Small Cisterns Quiet & Fast Fill
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
SP Malvern Thermostatic Bar Mixer Shower Brass with chrome finish Fully thermostatically controlled Separate flow and temperature controls Compatible with all common types of household water systems Suitable for high and low pressure water systems, Adjustable handset height Includes fixings 20 Year Guarantee
Make Washing Machine Outlet Tee 40mm 40mm High quality washing machine/dish washer tee outlet suitable for use with 40mm push fit and Solvent weld pipes, this waste plumbing product is ideal for plumbers and DIY
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Oracstar Compression Blanking Nut 3/4" Oracstar Compression Blanking Nut Size 3/4" Colour gold For pipe fittings
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Solenoid Valve Vzwf-B-L-M22C-N12-135-1P4-10 Force Pilot Operated, Npt1/2" Connection. Design Structure= (* Diaphragm Valve, * Forced) , Type of Actuation=Electrical, Sealing Principle=Soft, Assembly Position=Magnet Standing, Mounting Type=Line Installation, Festo
Solenoid Valve Cpe10-M1Bh-5L-M5 High Component Density Valve Function=5/2 Monostable, Type of Actuation=Electrical, Width=10 Mm, Standard Nominal Flow Rate=180 L/Min, Operating Pressure=3 - 8 bar, Festo
Solenoid Valve Cpe14-M1Bh-5L-QS-6 High Component Density Valve Function=5/2 Monostable, Type of Actuation=Electrical, Width=14 Mm, Standard Nominal Flow Rate=400 L/Min, Operating Pressure=3 - 8 bar, Festo
Solenoid Valve Vuvb-St12-M52-Mzh-Qx-1T1 Valve Function=5/2 Monostable, Type of Actuation=Electrical, Valve Size=12 Mm, Standard Nominal Flow Rate=240 - 400 L/Min, Operating Pressure=2, 8 - 8 bar, Festo
Solenoid Valve Vuvb-St12-M52-Mzh-Qx-D-1T1 Valve Function=5/2 Monostable, Type of Actuation=Electrical, Valve Size=12 Mm, Standard Nominal Flow Rate=240 - 400 L/Min, Operating Pressure=2, 8 - 8 bar, Festo
1/8" BSP Parallel Female, 3/2 Normally Closed Function, Solenoid/Spring Actuation, Solenoid Valve, Aluminium, Working Temperature -5┬░ to +50┬░C, Maximum Working Pressure 8 bar, Pneumax
3/8" BSP Parallel Female, Threaded Hydraulic, 2 Way Divider, Flow Control Valve, Buna Seal, Cast Iron, 6 Litres per Minute, Maximum Working Pressure 250 bar, FT Pro
1/2" BSP Parallel Female, Needle Valve, Brass, Nitrile Seal, Working Temperature 0┬░C to +100┬░C, FT Pro
3/4" BSP Taper Male, 90┬░ Equal Elbow, Galvanised, Malleable Iron Fitting, EE
1/4" BSP Parallel, Female Thread, 3 Port 2 Position, Normally Closed, Brass Solenoid Valve, 24V DC, ACL
1/4" BSP Parallel Female, Flow Towards Thread, Cracking Pressure 3 Bar, Non-return Valve, Carbon Steel, Cracking Pressure 3 bar, Maximum Working Pressure 350 bar, LHA
1" BSP Parallel Female x 32mm Outside Diameter, UPVC Metric Pipe System, Stud, Working Temperature +20┬░C to +60┬░C, Maximum Working Pressure 12 bar, Comer
3/4" BSP Tapered Male, Malleable Iron Pipe Fitting, Galvanised, Equal 90┬░ Elbow, Fig. 94, Working Temperature -20┬░C up to +120┬░C, Maximum Working Pressure 25 bar, GF
2" BSP Parallel Female, Threaded Full Socket, 150lb Tube & Pipe Fitting, 316 Stainless Steel, Haitima
3/4" BSP Parallel Female x 15mm Outside Diameter, Plastic Plumbing Push-in Fitting, Flexi Hose, Length 300mm, John Guest Speedfit
1/4" BSP Taper Male x 8mm Outside Diameter, Push-in Connector, Parker Legris
28mm Outside Diameter, Plastic Plumbing Push-in Fitting, 90° Equal, Elbow, John Guest Speedfit
2" Nominal Bore x 63mm Inside Diameter, UPVC Imperial Pipe System, Equal, Socket, Working Temperature 0°C to +60°C, Maximum Working Pressure 15 bar, Comer
8mm Outside Diameter, Non-return Valve, T50 Series, In-line Push-in, Anodised Aluminium, Nitrile Seal, Working Temperature -20C to +80┬░C, Cracking Pressure 0.03 bar, Working Pressure -0.9 to 16 bar, IMI Norgren
Soaker hose rubber reinforced with nylon 12, 5 mm 0.3 - 0.8bar 2ltr/h black 25m 0500397 0500397
Widely used for fixing pipes and cables in all industries.
Manufactured toDIN 72571.
This range of Pipe Clips is designed to secure pipeline in place against walls. Always maintain a distance of 400mm between fittings and pipe clips. Pipes should be supported between 600mm to 800mm. Designed for use with John Guest®'s push-fit system.
Features and Benefits
• Simple yet effective way of securing pipes for safety and general tidiness
• Available in a range of sizes to suit your needs
• Manufactured from durable polypropylene to ensure maximum durability
Typical Applications
• Plumbing
• Pneumatics
• Automotive
Notes
• Working Temperature Range
• Minimum Working Temperature -20°C
• Maximum Working Temperature +70°C
• Working Pressure
• Temperature: +23°C. Pressure: 10bar
• Temperature: +70°C. Pressure: 7bar
• Tolerances
• Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD
• Maximum Torque Values
• Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A
• Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm
• Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm
• Size: 1in. Plastic threads: N/A. Metal threads: N/A
Produced from high quality PVC to give flexibility over a wide temperature range together with complete reliability in service. Suitable for use in both food and industrial applications.
The PVC hose is lightweight and has excellent abrasion and corrosion properties.
Highly resistant to most acids and alkalis. Codeflex clear PVC has 'low toxicity' to give absolute minimum taste and odour and also the total absence of Cadmium.
Abrasion, chemical and weather resistant.
Special Features:
Cadmium and silicone free
Resistance to a wide range of chemicals and high resistance to acids/alkalis
Good flexibility
Service temperature -15°c to +60°c
Toxicity - low and suitable for food use
Excellent transparency
Series AKH
Check valve provides design solution based on operating conditions. The series is compact and lightweight with low cracking pressure. The AKH with one-touch fitting, straight type, is easily installed in pipelines.
DIN 43650/B
Nominal size: 22mm.
IP54 - DIN 40050.
Terminal pins: 2 pole plus earth.
Resetting: Spring return.
Notes
• Images are for illustrative purposes only, please read the specification before ordering as the sizes pictured may be different from the actual product
ISO 6952/B Connector.
Nominal size: 22mm.
For use with all makes of DIN 43650 coils.
IP65 - EN 60529.
Cable fitting: M16 x 1.5.
DIN 43650/B.
For use with solenoid valves. IP54.
Nominal size: 22mm.
Terminal pins: 2-pole + earth.
High Pressure Float Valves
Manufactured to BS1212, for use in water tanks and cisterns to prevent overflow.
Widely used for fixing pipes and cables in all industries.
Manufactured to DIN 1596.
Widely used for fixing pipes and cables in all industries.
Manufactured to DIN 72572.
The Hozelock Aquasolo Watering Cones are made from patented ceramic and offer an innovative way of caring for precious plants both in the home and garden when you are away. This simple self-watering system, made up of a ceramic cone and a plastic screw adaptor, is easily assembled in a few minutes. A reusable reservoir, Aquasolo can also be used to provide hungry plants with liquid feed and is great for greenhouse and house plants alike. The watering cones are compatible with most bottle types from 0.5L to 2L capacity and cater for plant pots up to 25cm in diameter, keeping plants watered for up to 28 days. Just follow these few simple steps for the perfect watering solution (1) Select the Aquasolo cone according to the size of your pot and choose the bottle size for the required duration. (2) Fill the bottle with tap water, adding liquid feed if required. (3) Screw the bottle onto the cone, with or without the adaptor, turn upside down and make a hole in the bottom. (4) Insert the cone into the plant pot to allow a slow release of water into the compost. To ensure optimum performance and long life of your Aquasolo, remove the cone every few months and soak in a vinegar solution, brush and rinse in clean water. The Hozelock Aquasolo watering cone extends Hozelock&rsquos heritage of quality, innovative products that are designed for gardeners by gardeners. Comes with a 1 year warranty. Pack of 4 Hozelock 2717 Green Aquasolo Watering Cones for Medium 16in Pots.
The Hozelock 4-in-1 Multi Use Portashower is a compact, portable shower, which is only 460mm high and easy to store. It is ideal for camping and caravanning. The Portashower comprises of a pressure sprayer with air safety valve, an easy to control hand spray and 2 metres of hose. Approximate spraying time 3 minutes. Capacity 7 litres (5 Litre Max)
Hozelock Water Butt treatment is a safe, non-toxic treatment for stored water. The liquid prevents unpleasant odours and unsightly scum whilst helping to keep the water free from slime and algae. Treats 6,400 litres of water. Size 500ml.
The Flopro Supergrip Hose Repairer permanently connects 2 hoses, can also be used for repairing damaged hose. Ultra-tough and made using superior ABS plastics with an extended clench mechanism that ensures a permanent hose connection.
1.1/4" BSP Parallel Male, Threaded Hydraulic, In-line, Check Valve, Zinc Plated Steel, 250 Litres per Minute, Cracking Pressure 1 bar, Maximum Working Pressure 320 bar, FT Pro
1" BSP Parallel Male, Threaded Hydraulic, In-line, Check Valve, Zinc Plated Steel, 90 Litres per Minute, Cracking Pressure 1 bar, Maximum Working Pressure 320 bar, FT Pro
Hydraulic Tube Clamp, Series A, B & C, Clamping Rail, Series A and B, 2m Length, Depth 11mm, Steel, RSB
Compressor Spare Part, Single Phase, 230V, Pressure Switches, 1 Way, 230 Volts, Working Temperature 0┬░ to +50┬░C Pressure Range 4 - 12, Maximum Working Pressure 12 bar, Industrial Quality
3 port valves for residual pressure release. Can be locked in off state with padlock. Visual position indication. Red handle for easy location.
General purpose spool valves. Media compressed air & neutral gases. Mounting body ported or manifold.
The air checker, PS1 Series, electronic pressure switch is available for positive pressure and for vacuum.
Dimensions: W x H x L: 13 x 10 x 30mm for standard type without connection part.
LH Series - Silicone-Free
General-purpose hose suitable for drainage of locations with small differences in elevation; temporary water supply: sprinkler irrigation or, due to its resistance to most chemicals, for spreading liquid fertilisers and agricultural chemicals.
Special features:
Cadmium-free. Good flexibility. Long service life. Minimal electrical conductivity. Tough, puncture-proof. Unaffected by the elements.
Light duty - blue.
Medium duty - yellow.