Find Pumps Products

Composite pump with manual squeeze type, self-priming feature. Suitable for water, oils and non-aggressive chemicals. Ideal for use on up to 25L containers. Made from PE plastic. Suction tube length 385mm. Discharge tube length 540mm. Delivers approximately 7L/min.
• EASY-TO-USE - Composite pump with manual squeeze type, self-priming feature.
• DURABLE - Made from PE plastic.
• MULTIFUNCTIONAL - Suitable for water, oils and non-aggressive chemicals and in all containers up to 25L.
• VERSATILE - Perfect for use in transferring liquids from containers to source, quick and hassle free.
• SPEEDY - Delivers approximately 7L/min.
• SPECIFICATIONS - Suction tube length 385mm. Discharge tube length 540mm.

Manufactured from nylon and polypropylene with PTFE seals and features a stainless steel plunger rod. Ready-to-go self-priming pump makes the unit quick and easy to use. Suitable for use with cellulose thinners, antifreeze, AdBlue®, brake cleaner, detergents, mild acids and gun wash. Universal adaptor (Model No. TP99/1) is available for drums fitted with a plastic pouring spout.

RP250
Cast iron pump, steel suction tube and spout. Suitable for lubricants and diesel (not anti-freeze). Suitable for container size 200ltr. Tube length 980mm. Inlet on pump 2” BSP and M59 x 5 male thread.

This Faithfull High-Pressure Hand Pump features a large air cylinder with a long plunging action, providing rapid inflation and achieving a high-pressure output of up to 160 psi / 11 bar. The durable steel body has a double-sided footplate for added stability, with a large twin grip pump handle providing a comfortable grip for ease of use. The pump is fitted with an analogue pressure gauge with a maximum reading of 160 psi /11 bar, and a generous 60cm long rubber hose, fitted with a double-head connector for use with both Schrader and Presta valves. Hose clips are also provided for neat, and easy storage. Supplied complete with additional adaptors for use with balls, toys and other inflatable items. Specifications Hose Length 60cm. Maxi. Pressure Reading 160 psi / 11 bar.

Manufactured from hardened and tempered chrome vanadium steel with corrosion-resistant chemically blacked finish. Vinyl grip for improved comfort and control. Replaceable soft grip plastic inserts allow delicate or finished components to be gripped without damage. Eight position groove with spring-loaded rapid jaw adjustment.
Overall length: 250mm.
Capacity: 40mm.

Heavy-duty cast steel body suitable for use with low viscosity products such as oils, diesel, antifreeze and other non-corrosive fluids. Supplied with 2"BSP adaptor and 3pc dip-tube suitable for use on 205L drums. Delivers approximately 1L/revolution, emptying a 205L drum in three minutes.

Max Flow Rate (lpm) - 80
Max Pressure (Bar) - 3.5
Spout OD (mm) - 34
Body Material - Black Polypropylene
Seal Material - Viton
Inlet - 1" F BSPP Swivel
Manual
Suitable for Diesel, Oil, Water and Chemicals

Ideal for installation filling, venting and maintenance flushing of solar heating systems. Powerful 750w/230v motor linked to a centrifugal pump has a max flow rate of 30l/m at a maximum of 5.9bar and can be operated on fluids with a maximum temperature of 60°. The 30 litre tank has large openings for easy filling and a ball valve in the base for easy emptying. The tank can be removed from the transporter for filling and emptying away from the job. Weighing 23.3kg the ROSOLAR is fitted with pneumatic tyres and a retractable handle and can be transported upright or horizontal. Comes complete with 2 x 3m 1/2”hoses which can connect together to aid filling.

1/2" BSP Parallel Female, 12V Submersible Transfer Pump, 12V, Flow 18 Litres per Minute, Maximum Working Pressure 1 bar,

2" BSP Parallel Male, Fuelling Equipment, Drum & Adblue, Polyethylene, Drum Tap, Polyethylene

Rotary Barrel Pump, Redashe

Available to suit dispensing of various liquids and materials from 210 litre capacity barrel drums, these Lever Action Hand Pumps are a simple way of controlling the flow of liquids.
Features and Benefits
• All products are suitable for 210 litre containers
• Can be purchased to suit differing liquids to suit your needs
• Each product comes with a telescopic riser tube to suit your barrel drum
Typical Applications
• Industrial
• Pubs
• Workshops

Designed to convert thread forms to a 2in. BSP, allowing you to attach barrel taps or pumps to your barrel drum, these barrel adaptors are cost effective and durable. Available in a range of sizes and specifications to suit your needs.
Features and Benefits
• Manufactured from durable plastic for bolstered product longevity
• Available in a variety of sizes to suit your barrel drum
• Each product is colour coded allowing you to easily find the right adaptor with ease
Typical Applications
• Industrial
• Bars and Restaurants
• Automotive

Available in either nylon or PVC construction, these manual drum pumps are suited for 20 and 25 litre jerry cans and drums. Both products are suited for light to medium duty grade oils and can be used with some chemicals and solvents. Supplied with a universal clamp adaptor that is suited for use with all 20 and 25 litre drum apertures.
Features and Benefits
• Universal clamp adaptor allows the product to fit on all 20 and 25 litre drums
• Can also be used on jerry cans for versatility
• Available in either nylon or PVC to suit your preference and requirements
Typical Applications
• Automotive
• Engineering

Composite pump with self-priming feature. Suitable for oils and non-aggressive chemicals. For use on 60-205L drums. Delivers approximately 17L/min.

Manufactured from steel, this lever pump is zinc-plated for additional protection. Comprising of a self-adjusting 480-900mm telescopic suction tube suitable for lubricants and non-corrosive liquids. Featuring a comfortable handle grip and a pump-type lever pump. The pump discharges 300ml of your desired liquid per stroke and is suited for use on 205 litre containers.
Features and Benefits
• For use with BSP and metric threaded barrels
• Comfortable grip handle for improved user experience
• Zinc plating protects against corrosion and wear and tear
Typical Applications
• Automotive
• Engineering
• Fluid Handling

For use with jerry cans or containers to transfer diesel and other liquids. Powered by 2 x D size batteries (not included) Rainproof separate On/Off buttons and LED light. Oil and flame resistant discharge hose. Adjustable suction pipe extends from 380mm to 520mm with 32mm suction end.

Lift action barrel pump, stainless steel.

Self-priming lever pump manufactured from galvanized steel with 14L reservoir. Features carry handle for ease of manoeuvrability and foot plate for stability while in use. 1.8m Delivery hose with angled spout. Drip opening/spout storage within bucket cover for tidy storage when not in use. Suitable for oils up to SAE 40 viscosity.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 56mm drum closure diameter fitting.

Available to suit 25 or 205 litre containers, these syphon pumps are an efficient way of controlling and dispensing a host of fluids. Comprised of a flexible plastic outlet and semi-rigid inlet tubes, the hand pumping units incorporate one-way valves. Suited for use with petrol and diesel as well as with non-corrosive liquids. All tubes can be cut to length and are fitted with a threaded bung. Model SPS/25 has a squeeze action and models SPS/205 and SPH/205 have a plunger-type action.
Features and Benefits
• Tubes can be cut to your desired length to meet your requirements
• Suitable for use with petrol, diesel and all non-corrosive liquids
• Available to suit three sized containers
• Flexible nature allows you to manipulate the pump to your desired position
Typical Applications
• Engineering
• Aquatics
• Automotive

Manual diaphragm pump.

Designed for use with fluids where a regular cast iron or steel barrel pump cannot be used. Pump body is made from glass filled polypropylene with Ryton veins. Seals are from Vitron rubber and all hardware is stainless steel. Strainer fitted at the suction tube inlet stops contaminants. Threaded polypropylene suction tube and a choice of 2" bung adaptors for use on both plastic and metal drums of capacities 50ltr and 205ltr. For use with water-based fluids, anti-freeze, acids, chemicals etc., in addition to all petroleum-based products. Delivery 5ltr per 20 turns of the handle).
DO NOT USE with acetone, lacquer, mineral oils, solvents or turpentine.

Steel barrelled, self-priming, lever pump. Supplied with 2"BSP adaptor and dip-tube suitable for 50 to 205L drums. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. High flow unit delivers approximately 500ml per stroke. Supplied with two delivery nozzles, one standard swan neck and one acute angle with filter for removing impurities from fluids.

Heavy-duty aluminium die-cast construction fuel transfer pump with a discharge rate of up to 1 gallon per 5 strokes (800ml per stroke). Stainless steel piston and fuel resistant hi-nitrile rubber diaphragm. 2" die cast bung adapter and extra heavy-duty steel handle with security locking latch. Pump inlet is fitted with an easy to clean wire mesh screen filter. Telescopic suction tube, adjustable to fit 50 to 205ltr drums, with non-return valve. Easy dispensing through 2.4m (8') of antistatic neoprene rubber hose with die-cast dispensing nozzle.

Keep your Kennedy® parts washer in good repair with these handy replacement components.
Features and Benefits
• Quick and easy to fit
• Like for like replacement component
• Prolongs the service life of your parts washer

Rotary Hand Pumps for Drum Barrels.

Electric Pumps for Diesel Fuel

The Faithfull Water Pump Attachment is designed for use with electric power drills and 1/2in hose pipe. It is ideal for watering the garden from a water butt and for emptying sinks, draining paddling pools, aquariums and other small containers. Please note that this equipment is not for use with volatile or flammable liquids or liquids contaning solids. CAUTION - DO NOT RUN DRY. Specification Max. Priming Height 10m Max. Drill Speed 3,400/min. Dry Running Limit 12 seconds Max. Capacity 660 litres (145 gallons)

For conducting hydrostatic pressure tests on water or oil carrying pipe work. Maximum Pressure: 60 bar (840psi). Tank Capacity: 12 litres. Connection: R1/2" BSPT.
Features and Benefits
• The RP50 allows precise control of pressure levels, making it suitable for conducting accurate pressure tests.
• This testing pump typically offers a broad pressure range, allowing for testing at both low and high pressures, up to 60 bar.
• The pump is designed for ease of use, with clear pressure gauges and user-friendly controls for setting and maintaining test pressures.
Typical Applications
• Plumbing and Pipe Systems
• Heating and Cooling Systems
• Pressure Vessels
• Boilers
• Fire Sprinkler Systems
• Pressure Piping Systems
• Pressure Relief Valves
• DIY Projects

DTP500
Heavy-duty aluminium construction. Durable inlet and outlet valves. Suitable for the transfer of many different liquid types. Portable and easy to operate. Ideal for use in many home, industrial and farm applications.
Capacity: 500cc.

The pump is designed exclusively for pumping diesel and fuel oil of the Hazard Class A III in areas that do not carry a risk of explosion. The temperature of the delivered fuel must be between -10°C and +35°C.
Flow rate: 52ltr/min.
230V. Length of suction hose 1.6m, delivery hose 4m.
Not suitable for petrol/gasoline

The TT10PB In-Line Digital Turbine Meter delivers unmatched accuracy within 1 percent, setting a new standard for reliability and safety. With factory presets for 20 fluids and comprehensive cULus, CE, ATEX and IECEx safety approvals, it ensures versatility and peace of mind. Its durable rubber boot protects electronics from impact. Designed for ease of use, it measures various units and can be installed anywhere, even at the end of a hose.
Features and Benefits
• Precision accuracy within 1 percent for dependable readings
• Factory presets for 20 fluids
• Global safety approvals with cULus, CE, ATEX and IECEx
• Replaceable AA batteries
• Impact-resistant rubber boot protects meter and electronics
• Flexible installation
• Multi-unit measurement for gallons, litres, quarts, pints, and ounces

High pressure air-operated barrel pumps.
Fluid: low to medium viscosity oils ~ mineral & synthetic motor oils ~ hydraulic oil ~ antifreeze ~ transmission fluid.
Viscosity: 100 cSt / SAE10-30.
Inlet: 1/4″ BSPF.
Air inlet pressure PSI: 100 max.
Fitting: 2″ BSP barrel adaptor.
Riser tube: rigid to suit to suit 210 litre barrel.

Save valuable gas with this gas economiser, designed for use with Oxygen and Acetylene. Simply place the torch on the hooked arm when not in use and it will automatically shut down, then lift the torch again when you want to use it and it will relight.
Features and Benefits:
■ Allows you to repeatedly stop and start welding or cutting without the timely process of readjusting the valves
■ Reduces the loss of gas, saving time and money

Multipurpose pump perfect for topping up difficult to access points on motor vehicles, lawnmowers, chainsaws and other jobs around the workshop and home. One litre capacity suitable for all engine oils, transmission fluids, brake fluids and general purpose cleaners.

Easy-to-use polyethylene pump with self priming feature. Equipped with vent cap to stop discharge and flexible corrugated discharge tube. Suitable for oils and non-aggressive chemicals. For use on 205L drums. Delivers approximately 21L/min.

Allows fitting of Model No. TP99 and similar thinners pumps to drums that are fitted with a pouring spout.

The Faithfull FAIOCP50205L has an efficient lever action pump for use with steel barrels. This heavy-duty pump features a diecast aluminium head and bung nut, with a zinc plated 38mm curved discharge spout, and telescopic suction tube adjusting to suit the barrel size. The Faithfull FAIOCP50205L is for use with petroleum-based liquids only, with the following specifications Delivers 300ml (10 fl oz) per stroke. Fits 50 to 250 Litre (15 - 55 gal) drums.

The pneumatic oil pump set offers customers a reliable and efficient solution for dispensing oil in industrial applications. Ideal for automotive, manufacturing, and maintenance facilities, it streamlines lubrication tasks with precise control and ease of use. Powered by compressed air, it eliminates manual pumping, reducing operator fatigue and improving productivity.
Features and Benefits
• Robust steel construction with eye-catching blue lacquering
• Compatible with 200 to 220-litre barrels for versatile use
• Provides precision oil application for a clean working area
Typical Applications
● Suitable for not diluted media as cooling liquid

Manual Transfer Pump, Gear Oil Pump, Nitrile Seal. only adaptor
Note: Image is for illustrative purposes only and may differ from the actual product.

This Auto Choice IBC Gravity Feed Kit is a reliable and versatile fluid dispensing system designed to connect seamlessly to Intermediate Bulk Containers (IBCs). Whether you’re working with AdBlue, water, diesel, petrol, light oils, or certain mild acids and alkalis, this kit provides a safe and efficient gravity-fed solution for transferring liquids with minimal effort and maximum control. The kit includes a high-quality IBC adapter that ensures a secure and leak-free connection to standard IBC outlets, making setup quick and hassle-free. A 3-metre hose provides ample length for flexibility in use, allowing easy access to machinery, containers, or tanks at varying distances. The trigger dispensing handle gives you precise control over flow, reducing waste and helping to maintain clean work areas.

LP300
Zinc chrome finish steel, telescopic suction tube. Suitable for lubricants, diesel and non-corrosive liquids. Suitable for container sizes 60 and 200ltr. Tube length 480 - 900mm. Inlet on pump 2” BSP and M59 x 5 male thread.

To suit Kennedy Hydraulic Hand Pumps

Quick, economical Hand Pump provides a clean, safe way to unload your 200 litre drum. Producing 11oz per stroke is great for small shops or even as an emergency backup. Simple and easy to use, mounts directly to a 200 Litre drum on the 2"NPT Bung adapter.
Features & Benefits:
• Hand Action Lever
• Polypropylene Construction
• Telescoping Suction Tube
• 2" NPT Bung Adapter

This Turbine Meter is designed for precise fluid measurement with an accuracy of within 1%. This versatile meter can be installed in various environments, including remote locations at the end of a hose, making it suitable for diverse applications. It features factory presets for 20 different fluids and boasts a comprehensive UL/ATEX listing that encompasses the entire meter, ensuring superior safety compared to competitors. The Turbine Meter is powered by replaceable AA batteries, minimising downtime, while its durable rubber boot provides added protection against impact damage. With a focus on safety through intrinsically safe electronics and near-global regulatory approvals, this meter delivers peace of mind for users.
Features and Benefits
• Delivers precise fluid measurement with an accuracy of 1%
• Flexible installation options allow placement in numerous locations, even at hose ends
• Pre-programmed for 20 fluid types for convenience
• Full UL/ATEX certification enhances user safety
• Utilises replaceable AA batteries to minimise operational interruptions
• Comes in a robust rubber boot that safeguards against impacts
• Incorporates intrinsically safe electronics for added protection

A new range of 12 & 24 volt simple, compact, low cost submersible pumps designed to be dropped into tanks, drums. vessels, sumps, etc., to transfer: diesel ~ water / sump water ~ kerosene.

Robust rubber housing with integral digital electronic metering. Easy-to-read large, 4-digit, 28mm high LCD display calibrated in litres. Features flow rate indication. 1"x1"BSP Male/Female fittings. Suitable for use with AdBlue®. Powered by 2 x AAA batteries (supplied). IP65 Rated protection.

Manufactured from hard wearing and durable polyethylene. 55L Capacity suitable for the distribution of Diesel, Oil, AdBlue®, Water and Antifreeze. Supplied with Model No. TP6607 AdBlue® Lever Pump. Fitted with two roller wheels, hose holder and vent caps. Features a 2”BSP thread and 4-point screw fittings enabling other pumps to be fitted as required.

Manufactured from hard wearing and durable polyethylene. 55L Capacity suitable for the distribution of Diesel, Oil, AdBlue®, Water and Antifreeze dependent on pump supplied. Supplied with Model No. TP96 12V Diesel Pump Kit. Fitted with two roller wheels, hose holder and vent caps. Features a 2”BSP thread and 4-point screw fittings enabling other pumps to be fitted as required.

Manufactured from hard wearing and durable polyethylene. 55L Capacity suitable for the distribution of Diesel, Oil, AdBlue®, Water and Antifreeze dependent on pump supplied. Supplied with Model No. TP55 Oil Rotary Pump. Fitted with two roller wheels, hose holder and vent caps. Features a 2”BSP thread and 4-point screw fittings enabling other pumps to be fitted as required.

Polypropylene rotary pump, specially fitted with Bakelite vanes for transferring AdBlue® as well as acids, alkalis, oils and other fluids of similar viscosity. Supplied with 1300mm polyethylene extension hose. Features 2"BSP connector suitable for use on 205L drums. Delivers approximately 0.35L/revolution.

Steel barrelled, self-priming, lever pump. Supplied with 2"BSP adaptor and dip-tube suitable for 25 to 205L drums. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Delivers approximately 300ml per stroke.

Heavy-duty steel barrelled, self-priming, lever pump. Supplied with 2"BSP adaptor and dip-tube suitable for 25 to 205L drums. Fitted with non-drip spout and swivel handle. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Delivers approximately 400ml per stroke.

Heavy-duty polypropylene construction lift pump. Manufactured with polyethylene parts suitable for transferring AdBlue®. Fitted with 2"Mauser and 2"BSP adaptor for use with 205L drums. Supplied with 1.36m discharge hose. Delivers approximately 250ml per stroke.

Self-priming high performance double diaphragm lever pump. Heavy-duty die-cast aluminium pump head with stainless steel pistons and fuel resistant nitrile rubber diaphragm. 2"BSP Connector and telescopic dip tube to suit 50 to 205L drums. Approximately 800ml per full stroke discharge. Supplied with 8ft anti-static discharge hose and delivery nozzle with holder. Suitable for various oils, petrol, diesel, antifreeze, paraffin and other non-corrosive fluids.

Self-priming, pistonless, displacement pump fitted with non-drip nozzle and 2"BSP adaptor and dip-tube. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Fitted with nitrile seals. Approximately 250ml delivery per stroke. Accessory kit allows use on most containers and drums from 25-205L.
Accessory Kit for 25-205L Drums Model No. TP88/ACC.

Accessory Kit for Model No. TP88 25/205L Drum.

Self-priming, piston pump fitted with anti-drip nozzle and 2"BSP adaptor and dip-tube. Suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Unit will deliver 200ml per stroke but by using the two sleeves supplied, delivery can be limited to 40, 80 or 140ml per stroke. Will fit most containers and drums from 25-205L.

Polypropylene body with acetal piston and nitrile seals. Self-priming unit with anti-drip shut-off valve. Body is fitted with a 2"BSP adaptor and 915mm dip-tube suitable to fit 205L drums. Compatible with most fluids capable of being stored in plastic or metal drums. Not suitable for aggressive chemicals. A compatibility chart is provided. For optional extension hose kit order Model No. TP90HK.

Robust and compact portable pump for use with diesel, non-aggressive chemicals and clean or dirty water. Suitable for re-fuelling/fluid transfer of plant, agricultural and marine equipment on site. The pump is supplied with a 3m outlet hose and stainless steel nozzle plus a 4m battery cable with clips. Will fit through a Ø54mm aperture to allow emptying of containers. End cap can be unscrewed for periodic cleaning of the filter.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 69mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 58mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 61mm drum closure diameter fitting.

Manufactured from high impact stainless steel for added durability and corrosion resistance. Ideal for installing in traditional wells, clean water deposits, boreholes and garden irrigation systems. Nine stage pump enables high flow rates, high heads and ensures a stable performance.

The Faithfull Barrel Pump is a lightweight and corrosion resistant pump. Pump body is manufactured from glass filled polypropylene with Ryton veins with pump hardware of Stainless Steel. An internal strainer is fitted at the suction tube inlet to filter out contaminants. The pump is supplied complete with threaded polypropylene 3 piece (45in long) suction tube and a choice of two bung adaptors to fit both plastic and metal drums with a capacity of 15 - 55 gallons. The pump may be used to dispense petroleum products, water and water-based chemicals, anti freeze, wind screen washer fluid, mild acids and alkali solutions.

Bracket and fixings to attach Sealey 12V and 230V fluid transfer pumps to 205L barrels.
Supplied with a delivery nozzle holder that can also act as a drip tray to catch any accidental spills.
Can be used with most brands of fluid transfer pumps.

This Lumatic cast iron rotary pump suits a 205 Litre drum. It is suitable for diesel, motor, gearbox, and hydraulic oils.

The Faithfull Cast Iron Rotary Pump is an economical and simple solution for the manual dispensing of diesel and oil, primarily from a drum, but also from other types of storage tanks. Complete with a 2in bung adaptor for a secure hold and a built-in strainer to filter out any contamits. Robust cast iron construction and a telescopic suction tube, that when extended can reach a maximum length of 1m. Due to the cast iron construction this pump is not suitable for handling liquids with a flash point below 55C. Specification Pipe Length 1000mm Max. Capacity 205 litres Max. Flow Rate 310ml per revolution Max. Viscosity 410cSt Oils up to SAE140 Temperature Range -10C to +55C

High Flow Syphon Pump with Segmented Suction Pipe
• Easy-to-use polyethylene manual pump with self-priming feature.
• Equipped with vent cap to stop discharge after use, and 120mm flexible corrugated discharge hose.
• Suitable for water, oils and non-aggressive chemicals.
• Segmented suction pipe for height adjustment and easy storage and transport.
• For use with various drums heights from 420mm, 530mm up to 850mm/205L.
• Delivers approximately 21L/min. transferring liquids quickly and easily.
• Model No. TP782

Lightweight and easy to move around the garage or workshop. Great for parts cleaning with any non-corrosive, water-based cleaning solutions. Simple to use with any 14L bucket, such as Sealey Model No. BM16 (bucket not included) Ideal for degreasing and cleaning small parts and tools with the hard bristle brush. Unique channel drainage system to simply catch waste material, and the variable speed pump sits in the bucket to pump the cleaning solution direct to the head of the brush for effective cleaning.
• PORTABLE - Lightweight and easy to move around the garage.
• EFFECTIVE - Great for parts cleaning with any non-corrosive, water-based cleaning solutions.
• ADAPTABLE - Simple to use with any 14L bucket, such as Sealey Model No. BM16 (bucket not included) .
• DIVERSE - For degreasing and cleaning small parts and tools with the hard bristle brush.
• EFFICIENT - Unique channel drainage system to catch waste material and the variable speed pump sits in the bucket.

The Barrel Pump for AdBlue®-G 2" provides a reliable and user-friendly solution for dispensing AdBlue® fluid. With a constant delivery rate and durable construction, it ensures consistent and efficient dispensing over time. Ideal for various industries, including automotive, agricultural, and industrial sectors, it simplifies AdBlue® handling processes and promotes compliance with emissions regulations.
Features and Benefits
• A consistent delivery rate ensures reliable performance over time
• Completely dismountable design allows for easy cleaning and maintenance
• Availability of spare parts, seals, and pistons for a decade ensures long-term usability
• Simple barrel installation with screw coupling for hassle-free setup
• Flexible positioning for convenient use in various environments
• Includes a 3-year warranty (excluding wearable parts) for peace of mind
Typical Applications
• Dispensing AdBlue® and anti-freeze fluid

Pneumatic operated oil dispensing unit with 10L capacity. Large visual measurement container will identify the amount dispensed. Supplied with a range of eight transmission fluid adaptors. Features a safety valve to stop over-pressurising. Supplied with a storage case for the adaptor to minimise oil leakage when not in use.

The Manual Drum Pump is a durable and efficient barrel pump designed for quick and reliable transfer of petrol and other compatible liquids. It features a telescopic suction tube that adjusts to different barrel sizes, barrel screw couplings for secure installation, and a complete transfer hose set for safe and controlled dispensing.
Built for longevity, the pump is fully dismountable, making it easy to clean and maintain, and comes with a 5-year warranty (excluding wearable parts). With spare parts, seals, and pistons available for 10 years, this pump ensures long-term reliability for automotive, industrial, and workshop applications.
Features and Benefits
• Constant delivery rate ensures smooth, controlled fuel transfer without fluctuations
• Telescopic suction tube (355 - 955 mm) with filter adapts to different barrel sizes for flexibility and includes a filter to prevent contaminants
• Barrel screw couplings allow for quick and secure attachment to barrels, ensuring stability during use
• Complete transfer hose set (1500 mm) with steel spout hook provides extended reach and precise fuel dispensing with a secure hook for convenience
• Grounding cable with alligator clip reduces static buildup, enhancing safety when transferring flammable liquids
• Fully dismountable design allows for easy cleaning and maintenance, extending the pump's lifespan
• Freely positioned in 30° increments enhancing user convenience by allowing optimal positioning for different working environments
Contents
• Manual Drum Pump - Barrel Pump G 2''-M 64x4 SRL 355-955
• Telescopic suction tube with filter
• Barrel screw coupling G 2'' and M 64x4
• Transfer hose set (1500 mm) with steel spout hook
• Hose holder and grounding cable with alligator clip

The Salamander RP50TU pump is a 1.5 bar twin centrifugal shower pump. It features crossover technology allowing it to quietly and efficiently boost hot and cold water supplies to showers, baths, basins and toilets in negative or positive head, gravity fed installations. The Salamander RP50TU pump can be used with conventional and multi-function showers and a shower head up to 100mm. The pump includes AV couplers with isolating valves.

This 4Trade product is manufactured with high quality materials and with the tradesman in mind - to ensure an easy to install, longlasting product

4Trade PlumbRight Round Syphon Diaphragm pack is manufactured with high quality materials to ensure a long-lasting, durable fix.

The valve as supplied is fitted with high pressure restrictor seat as standard (white) , the valve is also accompanied by a low pressure restrictor seat (red) attached to the float arm.

4Trade PlumbRight Round Syphon Diaphragm is a high quality accessory that will enhance any bathroom project.

The Rothenberger Pressure Test Pump - RP30 stands out as a dependable and adaptable tool, engineered to provide accurate testing outcomes. Its innovative dual-valve system, known as Twin-Valve, enables self-testing, ensuring the precision and functionality of the device. Additionally, the RP30 offers fine pressure adjustment, allowing for meticulous control throughout testing procedures.
Equipped with a testing hose featuring a steel mesh, the RP30 mitigates reading errors, especially when the hose expands during operation. This feature is pivotal in maintaining accurate and dependable pressure readings, bolstering the reliability of the testing process.
Crafted to endure diverse weather conditions, the RP30 boasts cold-resistant properties. Its steel container is coated with DURAMANT, enhancing durability and shielding against corrosion and wear. This robust construction ensures optimal functionality, even in demanding environments.
Key Features:
Dual-valve system (Twin-Valve) for self-testing and precise pressure adjustment
Testing hose with steel mesh to prevent reading mistakes during expansion
Weather and cold-resistant steel container with DURAMANT coating for durability
With the Rothenberger Pressure Test Pump - RP30, you can confidently obtain reliable and precise testing results across a broad spectrum of applications.
Specifications:
Testing and pressure range, with 20 psi steps (from) : 0 psi
Testing and pressure range, with 20 psi steps (up to) : 440 psi
Testing and pressure range, with 1 bar steps (from) : 0 bar
Testing and pressure range, with 1 bar steps (up to) : 30 bar
Connection: R 1/2 Inch
Delivery rate: 16 ml/Hub
Product length: 440 mm
Product height: 240 mm
Product weight: 4.5 kg
Product width: 200 mm
Installation:
Connect the pressure hose to the equipment to be tested with valve V1 opened and valve V2 closed.
Open one or several purge points in the installation. Remove the handle-locking hook and pump liquid until all air has been purged from the system. Close the vent points and then fill the installation operating the pump handle with ample movements.
Keep on pumping until the test pressure has been reached.
Close valve V1.
If the test pressure is exceeded during the pumping operation, slightly open valve V2 until the required pressure is attained. Then close all Valves.
If no leaks are present, no pressure drop should be detected in gauge readings. At test completion, open both valves V1 and V2.

Grundfos Adapter, Mini Superseal to FCI cpl. 93348101 93348101

Grundfos ALPHA2 GO Circulating Pump 25-75 130 220-240V 9H GG0 93074268 93074268

Replace your old style ballcock valve with this better performing Fluidmaster PRO 400UK bottom-entry float valve. Made from a durable plastic, this easy to install float valve is perfect for 1 and 2 piece toilets. The height adjustable valve has been crea

The Fluidmaster® PRO Series was developed for the hard working plumbing professional who requires high quality, professional grade products that have been engineered for reliability and durability. The brand represents the most trusted professional toilet

This neat unit makes it easy to install an extra bathroom or en-suite with ease. With two inlets the Sanipro Up can easily deal with a WC, wash basin, bidet and a power shower. Ideal for replacement installations as no change in pipework needed.

The Wilo Yonos Maxo is a compact pump for commercial buildings with HVAC applications, with an EC motor and electronic power adjustment for optimum energy efficiency.
Easy to set up with three operating modes and simple adjustment over three speed stages when replacing an uncontrolled standard pump. Additional option to expand the pumps intelligent functions further with the Wilo Connect Module.
This inline glandless pump is suitable for use in domestic or commercial buildings for all central heating, underfloor heating, air-conditioning systems, closed cooling circuits, industrial circulation systems.

The Wilo Yonos Maxo is a compact pump for commercial buildings with HVAC applications, with an EC motor and electronic power adjustment for optimum energy efficiency.
Easy to set up with three operating modes and simple adjustment over three speed stages when replacing an uncontrolled standard pump. Additional option to expand the pumps intelligent functions further with the Wilo Connect Module.
This inline glandless pump is suitable for use in domestic or commercial buildings for all central heating, underfloor heating, air-conditioning systems, closed cooling circuits, industrial circulation systems.

Thomas Dudley Turbo manufactures a wide range of one-piece plastic WC flushing syphons, all of which can be used with confidence. As with every Dudley product, our plastic syphons undergo exhaust.