Find Fluids & Lubricants Products

GT85® is a lubricant, water displacer and penetrator all in one. Containing Teflon, it is equipped to create a long-lasting film to lubricate and protect. Ideal for preventing squeaks and rust, it's frequently used on equipment, like bicycles, including chains and cables. This lubricant drives out moisture from electrical systems and helps to start wet engines.
Features and Benefits
• Prevents squeaking and rust in inaccessible parts
• Contains Teflon which offers a long-lasting film which lubricates and protects
• Provides a lasting shine on interior car trim
Typical Applications
• Bicycles
• Cars
• Boats
• Garden tools
Warning
• Flammable - Aerosol

A one can solution to many, everyday engineering problems, the AC-90® is a true multi-purpose lubricant for maintenance and engineering professionals. Its active formulation helps rapidly displace moisture reducing damp induced faults on ignition circuits as well as providing excellent protection against corrosion whilst keeping parts moving smoothly.
Effective at removing grime and other residues, the solution is also useful for helping to release over-tightened or corroded fasteners, leaving a fine film for easy lubrication on reassembly.
Features and Benefits
• One solution to many common everyday engineering problems
• Active ingredients rapidly displace moisture and eliminate damp
• Provides excellent corrosion protection of metal parts and components
• Silicone free formula keeps moving parts working smoothly and efficiently
• Helps penetrate and release seized, corroded and over-tightened fasteners
• Leaves behind a fine lubricating film for easy assembly
• Effectively removes grime, grease residues, wax-based corrosion coatings, and more
• Available as NSF H1 registration for use in the food and beverage sector
Typical Applications
• Industrial
• Domestic
• Mechanical
• Anti-Corrosion Treatment

K033 Maintenance Spray from Selden is a blend of penetrating solvents, water dispersing agents and corrosion inhibitors. It instantly displaces all water from damp or wet components and prevents moisture traps by penetrating deeply, leaving behind a protective film to waterproof and guard against corrosion.
Providing ample Lubrication it aids and increases efficiency of working parts it can also be used as a pre-spray to electrical connections, preventing short circuiting due to water.
Features and Benefits
• Displaces all water from damp or wet components in an instant
• Helps prevent moisture traps by penetrating deep into components
• Waterproofs thanks to leaving behind a protective film
• Lubricates and increases efficiency of working parts
• Prevent short circuiting by pre-spraying electrical connections
• Prevents and helps to free seized threads and bearings
• Cleans/protects components against further corrosion
Typical Applications
• Maintenance
• Engineering
• Automotive
Notes
• 480ml can
Warning
• Flammable Aerosol

Silicone free and non conductive, Duck Oil® is one of Swarfega's® best known products and is perfect for multi-purpose use, effectively penetrating substrates for convenient lubrication and protection, without the need to dismantle and re-assemble machinery and components.
Features and Benefits
• Protects, penetrates and lubricates in one versatile, multi-purpose oil
• Displaces water and insulates electrics due to high dielectric strength
• Low surface tension allows for easy penetration of substrates
• Can be used to release seized components and fasteners
• Prevents rust and corrosion on metal parts for up to 12 months
• Easy to use and economical
• Available in 500ml spray and 5-25ltr canisters
Typical Applications
• Automotive
• Electrical
• Metalwork
• Industrial Machinery
Warning
• Flammable - Aerosol

Molykote 111 is a silicone-based grease compound that is specially formulated for the lubrication of control and pressure plug valves and for acting as a sealant for vacuum and pressure valves. It offers excellent water resistance meeting several global standards for water contact.
Features and Benefits
• Designed for lubrication and sealing of pressure valves
• Expansive service temperature range (-40°C 200°C)
• Excellent water resistance meets several global standards for water contact
• Compatible with many plastics and elastomers
• Low vapour pressure and volatility
• Conforms to FDA 175.300, NSF 51 and NSF 61
Typical Applications
• Lubrication of control and pressure valves
• Seals vacuum pressure valves
• Marine
• Industrial
• Outdoors
• Electrical

Class-leading rust care.
Features and Benefits
• Converts rust to a clean surface in 15 minutes
• Perfect for small patches of rust
• Repaintable after 3 hours
Notes
• 250ml Bottle

Withstands temperatures of -35°C to +200°C. Excellent lubrication on plastics, rubber, wood and metal. Formulated for improved high pressure performance. Waterproofs and protects against moisture. Prevents rust and corrosion. Eliminates sticking.

Withstands temperatures of -18°C to +145°C. For use on metal to metal connections. Water and heat resistant lubricant. Long last protection against rust and corrosion. Ideal for load bearing application. High viscosity lubricant.

With a comfortable lever grip and offset nozzle, this chrome plated steel lever gun has a 500cc lever and is suited to 400g grease cartridges. Supplied with a flexible rubber hose and suited for medium to heavy greases.
Features and Benefits
• Includes a flexible rubber hose to allow you to begin working immediately
• Manufactured from steel for durability and resilience
• Rubber grip around the lever for comfort and grip when administering lubricants
Typical Applications
• Suited for controlled lubrication of medium and heavy greases to your desired work piece

General-purpose lithium grease. Extreme pressure agents protect bearings/components subject to heavy shock loading. Latest low zinc additive technology. Operates from -20 to 120°C. Long service life

Super Lube® Grease contains PTFE particles held in suspension. This grease is a multi-purpose, thixotropic, patented, synthetic lubricant that outlasts petroleum based oils and greases and provides a more reliable lubrication.
Features and Benefits
• Formulated to withstand continuous temperatures from -42 to +232ºC
• Free flowing even in freezing temperatures
• Thixotropic - for the most effective film strength, this grease thins at points of shear in high operating speeds. As speeds are reduced it returns to original viscosity
• Non-toxic
• Non-flammable
• Odourless
Typical applications
• Bearings
• Chains
• Pumps
• Open gears
• Compressors
• Valves
• Conveyors
• Food processing equipment
• Slides

Multi-Purpose smart straw aerosol lubricants is designed to protect metal surfaces. This lubricant frees stuck, frozen or rusted metal parts and loosens rust-to-metal bonds.
Features and Benefits
• Spray mechanism permanently attached for quick and simple action
• Dual action spray design for both precise and wide spray
• Formulated to get under marks, grease and dirt making it easy to wipe them away
• Corrosion resistant ingredients
• Quickly dries out electrical systems to eliminate moisture-induced short circuits
Typical Applications
• Tools and equipment
• Battery terminals
• Spark plugs
• Bike frames
• Door locks and hinges
• Power tools
• Engines and exhausts
• Alloys

Manufactured from oil and chemical resistant polyethylene, these dispensing bottles are the cost effective way to apply lubricants in a precise and efficient manner. With rigid applicator nozzles and sealing caps.
Features and Benefits
• Applicator nozzle allows you to apply lubricants with precision
• Manufactured from durable polyethylene
• Available in two sizes to suit your needs
Typical Applications
• Automotive
• Carpentry
• Engineering
• DIY

Heavy-duty silicone lubricant anti-stick spray speeds up sewing & cutting processes. For use on sewing machines, cutting tables, guillotines; anywhere that sticking presents problems. Can also be used as a lubricant in foam converting and upholstery manufacture.

High performance lithium complex grease. NLGI 2 grade. Operating temperature range
-40 to +150°C. High load carrying capacity. Good water resistance and adhesion to metal surfaces.

The COPASLIP range of anti-seize compounds from Molyslip is specially formulated to protect fasteners from seizure brought on by both extreme temperatures and corrosion. Infused with pure copper particles, corrosion inhibitors and anti-oxidants, its semi-synthetic fluid helps provide components with excellent protection.
Reducing wear and torque in areas of high friction it helps prevent galling and pitting ensuring easy dismantling and re-assembly of metal fittings, even after prolonged exposure to extemes of environment and temperature.
Features and Benefits
• High and low temperature assembly compound
• Protects against seizure, fusion and corrosion in extreme conditions
• Reduces wear and torque in areas of high friction
• Prevents galling and pitting
• Use to ensure easy dismantling and re-assembly of metal fittings
• Protection from sub-zero temperatures to over 1100°C
Typical Applications
• Metal fasteners
• Assembly
• Construction

This rust remover gel works on nuts, bolts, garden tools and has many other uses around the house and garden. It removes rust in 2 to 3 hours and is non harmful to the skin.
Features and Benefits
• Does not scratch surfaces
• Does not damage paintwork
• Easy to use integral brush
Typical Applications
• BBQ
• Fire surround
• Garage doors
• Metal garden furniture
• Metal railings
• Radiators
• Nuts and bolts

RTD is the world leading, hand applied, lubricant for reaming, tapping and drilling and has been the market leader for over 60 years.
The range contains technically advanced extreme pressure additives which significantly reduce friction at the cutting edge, giving superb performance, extending tool life and promotes superior surface finish.
Its soft paste is suitable for all metals including hardened steels, titaniums and nimonics, in even the most severe cutting operations.
Features and Benefits
• Ultimate cutting performance
• Formulated to cling to the tool providing excellent cutting performance
• Doubles tool life
• Excellent surface finish
• Reduces wear and tap breakages
• Minimises waste and scrap
• Reduced friction and increased wear resistance
• Excellent extreme pressure performance
• Multi metal compatibility
Typical Applications
• Metalwork
• Reaming
• Tapping
• Drilling
• Tool maintenance
Notes
• Sulphur free and chlorine free versions of RTD are also available

RTD Liquid is a hand applied, high performance, metal cutting lubricant that is suitable for use on a wide array of metals.
Features and Benefits
• Ultimate cutting performance to ensure excellent surface finish
• Cost effective extreme pressure performance that reduces wear, scrap & breakages
• Formulated to reduced friction at the cutting edge and double tool life
• Highly versatile, suitable for use with all metal types
Typical Applications
• Reaming
• Tapping
• Drilling
• Automotive
• Construction
• Engineering and Fabricators
• Marine
• Mining and Quarrying
• Power Generation
• Rail
Notes
• Suitable to be added to ordinary mineral cutting oil for the most severe cutting

High quality, premium hydraulic fluid. Provides excellent anti-wear and thermal stability performance. Latest low zinc additive technology. Provides excellent protection from corrosion on ferrous and yellow metal components. Good anti-foaming properties. Good water tolerance and demulsification properties.

Neutralizes static electricity on any surface prone to static charge. Ideal for use prior to maintenance, or as part of a static control programme.
Features and Benefits
•Quick and easy to use, the spray rapidly reduces electrostatic charges
•Non-toxic and biodegradable
Typical Applications
•Paper and textile industries
•Anywhere prone to airborne dust
•Plastic components
Warnings
•Do not use on live electrical equipment
•After applying, always leave for 4/5 minutes before operating the equipment

The Classic Kent & Stowe Long Reach Watering Can in forest green is perfect for everyday watering. Enables precise watering from a distance and also includes a swivel rose for different pouring patterns. Galvanised for strength and powder-coated for long life and rust resistance. A great addition to your garden all year round.

IGE5408155J - Aluminium alloy manual diesel trigger nozzle.
IGE5408156M - Polypropylene manual trigger nozzle.
IGE5408190K - Auto shutoff diesel and unleaded petrol trigger nozzle.

Lubricating grease for metal/metal, metal/plastic combinations involving slow to medium-fast movements and light load, over a wide range of temperature -73°C to 180°C.
Features and Benefits
• High oxidation resistance for longer lasting lubrication
• Good low temperature performance helps reduce the risk of seizing
• Compatible with many plastics
• Water resistant properties reduces wash off
Typical Applications
• Engineering
• Mechanical

Sherwood® STD Tapping & Drilling Compound has a low melting point paste maintains a continual lubricant feed to the cutting edge. Hand applied. Suitable for the most severe cutting operations.

This product provides long lasting lubrication and is non-drip with excellent adhesion and sealing properties to provide resistance to water. It works across a wide range of temperatures and is suitable across a number of different applications.

CG90-FG H1
High temperature clear grease with PTFE has a wide temperature operating range rated to -45°C to +350°C. Holds H1 approval from InS 1795391. Non-toxic, no odour, multi-viscosity, water and steam resistant and with added corrosion inhibitor. Size: 500ml aerosol.

This range of lubricants are specially formulated slideway lubricants. They consistently provide good performance with excellent stick-slip and load carrying capabilities. The high film strength and load carrying properties eliminate stick-slip.
Features and Benefits
• Special formula eliminates stick-slip
• Various viscosity levels for various tasks
• High film strength and load carrying
Typical Applications
• Combined hydraulic and slideway systems
• Most machine tool lubrication systems
• Aerospace
• Automotive Manufacture
• Machinery
• Metals

High performance metal working compound based on extreme pressure additives fortified with MoS2 to provide excellent extreme pressure performance and lubricity.
Features and Benefits
• Improves cutting performance and provides an improved surface finish
• Low melt point for versatile use with all metals
• Fortified with MoS2 additives to provided excellent lubricity and extreme pressure performance
Typical Applications
• Metals
• Tapping
• Drilling
• Threading
• Sawing
• Reaming
• Broaching
• Drawing
• Pressing
• Extruding
• Forging
• Forming

Food safe silicone oil is a synthetic clear polydimethyl siloxane oil that is available in a range of viscosity and compatible with most standard oil applications.
Features and Benefits
• Extremely low surface tension and anti-foaming properties for improved application
• Water repellent properties for use in wet and damp setting
• High electrical insulating properties and thermal conductivity suitable for a wide range of use
• Good chemical compatibility with use on rubbers
• High temperature resistance up to 250°C
• Low variation in viscosity versus temperatures
• InS H1 Registered, made with FDA approved ingredients
Typical Applications
• Food industry
• Beverage industry
• Pharmaceutical and clean environments
• Non-stick coating
• Release agent plastic/rubber moulds
• Light lubricant for plastic mechanisms
• Heat transfer fluid
• Cardboard Processing Plants
• Metal chutes/slides
• INS H1 registered
Notes
• Available in aerosols or bulk
*images are for illustration purposes only*

The Faithfull Straight Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and are available in common threads. Supplied in packs of 5.

MoTip Pro Industrial Grease Spray is used to lubricate chain-driven transmissions, which are liable to heavy load. Industrial chain grease can be processed like oil, with the properties of grease. Offers outstanding mechanical and thermal stability, whilst also preventing wear and sticking. Resistant to weather influences, weak acids and bases, it is also water-repellent and pH-neutral. Specification: Temperature Resistant: -50°C up to +200°C.

Withstands temperatures of -20°C to +90°C. Quickly penetrates rusted and corroded parts. Loosens seized fixings. Lubricates and prevents rust and corrosion. Highly water resistant. Very low surface tension to penetrate rust. Safe on metals, alloys, rubber, plastics and most paints. Advanced formulation works as an effective mould release agent.

Use on all types of drive chains, including production line, door mechanisms, quarry plant, and drying oven doors.
Features and Benefits
• Offers maximum adhesion to chain link
• Excellent penetration, lubrication and corrosion protection of pins
• High temperature resistance of up to 200°C continuous (300°C intermittent)

Ambersil 40+ is a true multi-purpose 'cure-all' for engineers, lubricating protecting and de-watering all in one. The oil can be used to penetrate seized fasteners, as a de-watering fluid, a general lubricant, and as a corrosion inhibitor on all ferrous and non-ferrous metals as well as most plastics.
Features and Benefits
• All in one lubricant corrosion protector and de-watering fluid
• Excellent water displacement performance with high dielectric strength and non-conductive film
• Safe on most paints, plastics, rubbers, and all metals
• Approved by aerospace, leisure, rail and automotive industries
• Silicone free with excellent temperature resilience -20°C to +115°C
Typical Applications
• Metalwork
• Aerospace
• Rail
• Automotive industry
Notes
• Operational temperature range: -20°C to +115°C
Warnings
• Flammable - Aerosol

SO-Grease EP2 is a multi-purpose lithium grease suitable for use in high pressure greasing equipment.
Features and Benefits
• Pumpability ensures regular and easy flow through the fine bore pipes used in automatic systems
• Lead-free
• Contains extreme pressure additives to allow use in heavy load conditions
• Formulated with anti-rust additives to protect against corrosion
• Contains anti-oxidants to prolong product life
Standards
Complies with British Timken Recommendations 2891

MOLYKOTE® 1000 Lubricant paste is a solid nickel & lead free anti-seize paste used to reduce wear, optimize friction of threaded fasteners and metal-to-metal joints to allow non-destructive dismantling.
Features and Benefits
• Wide temperature range (-30°C to +650°C) with a high load-carrying capacity
• Allows non-destructive dismantling despite prolonged use at high temperatures
• Provides good corrosion protection
• Ensures coefficient of friction remains unchanged in areas of oiled bolts, even following several bolt loosening & re-tightening processes
Typical Applications
• Cylinder head bolts
• Nozzle head screws of plastic injection moulding machines
• Bolted joints in the chemical industry
• Tension rings in centrifuges

This highly pure solid lubricant paste is specifically designed for bolted joints, offering exceptional performance without containing lead, nickel, sulphur, chlorine, or fluorine. It is ideal for screws, nuts, and bolts subjected to extremely high temperatures, particularly those made from heat-resistant or nickel-based alloys. Widely used in applications such as gas steam turbines and power stations, it ensures reliable performance under extreme conditions. The paste withstands temperatures up to 1400°C and allows for non-destructive loosening of bolted joints, even after prolonged exposure to high temperatures. This product combines exceptional purity and functionality, making it a reliable choice for demanding industrial applications.
Features and Benefits
• Compatible with high temperatures 1400°C
• Excellent load-carrying capacity and protects against seizing
• Can used in areas where cleanliness is required due to low seepage formula
• Allows for easy release of fasteners after exposure to high temperatures
Typical Applications
• Steam valves
• Power plant turbines

8008
Resists temperature up to 980°C.

Gravity feed kit with an IBC adapter for a wide variety of fluids including Adblue.
Features and Benefits
• Long 3 metre hose for further reach
• Functionality for the trigger to be latched open for ease of use
Notes
• Poly trigger nozzle - 30 litres/minute
• Fluid: Adblue, diesel, petrol, water, light oils, weaker acids and alkalis
• Inlet/outlet: IBC adaptor / TNAD trigger nozzle
• Adapter thread: DIN61 female (S60 x 6)
• Delivery hose: 3 metres long
• Material: polypropylene, stainless steel, viton
• Flowrate: up to 30 litres per minute
• Weight: 1 kg

So-cool multi-metal is an oil based cutting fluid that provides a high degree of machine tool lubrication. This water-soluble is designed for general purpose machining on ferrous and non-ferrous metals and is also suitable for heavier general purpose machining operations like surface and cylindrical grinding, rolling and general heavy machining.
Features and Benefits
• Specially formulated for use in both hard and soft water areas
• Low odour
• Does not contain formaldehyde donors, boron or chlorinated additives - environmentally improved
Typical Applications
• Milling
• Drilling
• Turning
• Sawing
• Machining
• Rolling
• Grinding

Action Can CT-90 4-in-1 cutting lubricant that makes metal working easier when cutting, tapping, drilling and reaming. It's multi-purpose formula helps reduce friction, improves the finish of surfaces and reduces cutting time.
Features and Benefits
• 4 in 1, multi-metal cutting, tapping, drilling and reaming lubricant
• Improves surface finish reduces friction and cutting time
• Extends tool life and improves work quality by removing heat and preventing sticking
• Available as a spray, foaming, liquid, and compound
Typical Applications
• Agriculture
• Electrical MRO
• Fastener and fixings
• Industrial MRO
• Trade/PRO DIY
• Metal working

MoTip Pro PTFE Dry Spray treats mechanical parts of metal and plastic, where no residues of oil or grease are desired. PTFE Dry prevents wear and sticking. It has a very low friction factor, an excellent adhesion and is resistant to weather influences. It leaves no residues of oil or grease (dry film) Suitable for parts which are liable to light load and low speed. It can also be used as a release agent for moulds, where the use of silicone is not desired.

Ambersil Penetrating Oil is perfect for use as a highly effective release agent for all types of seized fasteners, whether its corrosion, over tightening or expansion due to heat. Safe for use on all metals, the oil is easy to apply thanks to the handy aerosol spray. Food grade version available for use in the food and beverage industry.
Features and Benefits
• Quickly frees fasteners seized by corrosion, heat, and over-tightening
• Lubricates fine and close tolerance threads
• Facilitates easier disassembly & reassembly by softening rust and carbon deposits
• NSF H1 registered (Food Grade) version available
Typical Applications
• Marine
• Fork Lift Trucks
• Chemical Plants
• Manufacturing Plants
• Iron and Steel
• Engineering
• Plant and Equipment Hire
• Agricultural
• Public Works
• Quarries
• Paper Mills
• Automotive
Warnings
• Flammable - Aerosol

Molykote D321R is an air-curing dry lubricant that can be used for various metal on metal applications to help avoid stick-slip and ageing. It is particularly useful for combination of components with slow to medium fast movements and components bearing high loads. It can also be used during the run-in process and in extreme temperature and conditions such as high vacuum environments.
Features and Benefits
• For the lubrication of metal-on-metal components
• Suitable for use in extreme temperatures and conditions
• Air drying
• Avoidance of stick-slip
• High ageing resistance
Typical Applications
• Metal on metal components
• Components with high-loads
• Industrial
• Mechanical

A solid lubricant paste for the assembly and running-in of metal components.
Features and Benefits
• High pressure-absorption capacity
• Low coefficient of friction, (μ = 0.09, no stick-slip)
• Prevents frictional corrosion and scoring
• Good anti-corrosion properties for prolonged component lifespan
• High surface covering capacity (40m²/kg)
Typical Applications
• Running-in new machines and gear-boxes
• Permanent lubrication of machine elements
• Threaded spindles
• Splined shafts
• Toothed gears
• Worm and transmission gears,
• Fastners
• Valves
• Pumps
• Roller bearings
Notes
• Service Temperature: High - 450°/Low - -35°
• Sizes: 500g and 1kg

Gadus S3 V100 2 greases are a premium multi-purpose grease based on high viscosity index mineral oil and a lithium complex soap thickener. These greases offers excellent high temperature and under conditions of vibration. Containing additives to enhance anti-oxidation, anti-wear and anti-corrosion properties. Gadus S3 V100 2 greases are especially suitable for bearings operating at high temperatures and various speeds in the presence of moisture.
Features and Benefits
• Excellent mechanical stability even under strong vibrations
• Extreme pressure performance properties
• Good resistance to water and moisture
• Effective corrosion protection with long operational life at high temperatures
Typical Applications
• Electric motor bearings
• Air blowers

A dry film lubricant formulated with molybdenum disulphide for use where conventional wet oils would be undesirable. Particularly suitable for the assembly and running-in of gears, bearings, spindles and valves, it is effective for use where high temperatures occur, drying to a tough matt black high slip coating.
Features and Benefits
• Dry Lubricant formula resists attraction to dirt
• Durable coating with excellent adhesion to components
• Prolonged service life
• Withstands high-loads
• Anti static with good water and chemical resistance
• Operating Temperature Range 0 to 350°C
• Touch dry in 5 minutes
Typical Application
• Assembly
• Run ins
• Gears
• Bearings

Oil abased and non-abrasive Stuarts Micrometer Engineers Marking Paste is easily spreadable marking paste containing a high concentration of Prussian blue (or red) for indicating high spots on machine bearings, machine tool beds etc. Easily removable with methylated spirit.
Features and Benefits
• Non abrasive and easily spreadable formula
• Long shelf life for easy storage
• Easily transferable between surfaces
• Easily cleaned wiped clean off metal and detergent and water soluble
Typical Applications
• Marking
• Engineering
Notes
• Use sparingly due to high pigment concentration

Ambersil Corrosion Inhibitor is ideal for use on ferrous metals as a short to medium-term protective coating for metal parts and components. Predominantly designed for indoor use it can also be used a short term protector for components stored outdoors. Its flexible film residue is hardening and crack resistant and offers protection without marking or staining.
Features and Benefits
• Designed for short to medium protection for metal components
• Forms a 'self-repairing' waxy film that will not harden or crack
• Can be used as an anti-seize/anti-rust treatment for fasteners
• Will not stain or mark components
Typical Applications
• Metalwork
Standards
• Meets MIL-PRF-16173E

This high quality lubricating grease is manufactured from vegetable oil and thickened with non-soap gellant. It is also infused with corrosion and oxidation inhibitors. It is ideal for use with natural and synthetic rubber, avoiding any effects such as hardening or swelling.
Features and Benefits
• High quality lubricant
• Resistances to corrosion and oxidation
• Reduces the hardening and swelling of rubber
Typical Applications
• Ideal during the assembly of natural and synthetic rubber components for automotive brake and clutch system and suspension units
• Suitable for gland packing and seals

A medium duty funnel made from MDPE with high resistance to all fluids. Comes c/w rigid cranked spout for ease of access to difficult apertures and removable filter.

3® heavy duty rust inhibitor is a self-healing, soft, waxy film that provides non-sling lubrication.
Features and Benefits
• Formulated to protect and prevent rust and corrosion for up to 2 years indoors
• Safe on all metals
Typical Applications
• Aircraft fuselages
• Battery terminals
• Cables, chains and pulleys
• Cargo sections
• Metal parts
Approvals
• NSF® certified: H2 Registration

These side lever grip grease guns are ideal for professionals with their sturdy chrome-plated steel body. They can be used with medium/heavy greases. The working pressure is 4500 psi/310 bar.
Features & Benefits
• Chrome-plated steel body provides long lasting durability
• Side grip and offset nozzle allows precision on application
• Cartridge, bulk or suction fill allows for flexibility on refills
Notes
Only LG400 has a rubber grip on the handle

Food safe pure silicone grease used for protection, sealing and lubrication for all metal, plastic and rubber components.
Features and Benefits
• Highly compatible with plastic and rubber resulting in no deformation or swelling of parts over time and protects parts from drying and cracking with age
• Vast operating temperature range, suitable for use in extreme temperature from -40°C to 200°C
• Non-toxic suitable for food production industries use in portable water systems in contact with drinking water
• Registered WRAS approved use on taps and valves
• Water repellent grease suitable for use in wet and damp areas
Typical Applications
• Electric components(waterproofing)
• Water pipes
• WRAS Approved - 1508542
• O rings
• Release agent
• INS H1 registered - made from FDA listed ingredients
Notes
• Ozone resistant
• UV light resistant
*images are for illustration purposes only*

High performing food grade grease. Produced with water resisting base oils and adhesion improvers for wash off and increased corrosion protection.
Features and Benefits
• Clear grease that will not taint product or packaging
• Synthetic base oils give exceptional temperature range to suit various setting
• PTFE combined with a complex mix of antioxidant, EP packages creating versatile tool for use in many applications for several industries
• Appropriate for use in beverage, food, pharmaceutical and clean environments
• Resistant to high humidity and salt water environments
• Dielectric material that can be used to protect electrical equipment from ingress of water
• Ins H1 Registered, made with ingredients fully FDA Approved
• Available in range of sizes to suit your storage and application needs
Typical Applications
• UPVC door locks/window locks
• Trolley wheels
• Food packing machinery
• Suitable for use in food, beverage, pharmaceutical and clean environments
• INS H1 Registered
• Lubricates bearings, chains and sliding surfaces
• Bearings, pivots, chains slides, and mechanisms in clean environments, including plastic bearings and runners
*images are for illustration purposes only*

A premium multi-purpose grease with excellent mechanical stability at high temperatures and under vibrating conditions.
It is based on high viscosity index mineral oil and a new lithium complex soap thickener and contains additives to enhance anti-oxidation, anti-wear and anti- corrosion properties. Suitable for bearings operating at high temperatures, low and high speeds and in the presence of moisture.

Evapo-Rust® is a water-based rust remover that's formulated to clean away rust to leave behind bare metal. The non-toxic, award-winning formula requires no hard work or scrubbing, just a simple soak and rinse in the fluid is enough to get rid of even the toughest rust.
Features and Benefits
• Requires no scrubbing or sanding for easy rust removal
• Non-toxic formula is also non-flammable and non-corrosive for safe handling
• Solution is reuseable for multiple treatments in one bottle (1 gallon removes up to 1/2lb of dry rust)
• Safe to use on all metals and won't cause damage to unrusted steel
• Won't damage plastic, rubber or non-oxide based paints from incidental contact
Typical Applications
• Rusty tools
• Hardware
• Automotive parts
• Household items
• Antiques
• Equipment

Plus Gas Formula A is a rapid penetrating lubricant for rusted or seized components freeing them for easy dismantling. It can also be used to effectively remove grease and dirt build-up as well as forming a resistant shield to displace moisture. Available in a liquid or aerosol form, the liquid is especially ideal for soaking larger tools allowing the formula to penetrate deep into the metal.
Features and Benefits
• Rapid penetration to help release seized components
• Helps eliminate grease and dirt build up
• Displaces water and creates a waterproof barrier to eliminate moisture
• Helps eradicate future corrosion on coated, rusted and untreated metal
• Silicon free formulation
Typical Application
• Tools
• DIY
• Automotive
• General maintenance
• Engineering
• Building and construction
Notes
• Available in liquid or aerosol - Liquid ideal for prolonged soaking of components
Warning
• Flammable - aerosol

A reinforced heavy duty lubricant formulated to protect and lubricate exposed gears, wire ropes and other moving parts. Due to the exceptional penetrating and water resistance properties this lubricants is ideal for situations where exposure to weather is experienced and its tenacity resists throwing off during use.
Features and Benefits
• Excellent lubricating power
• High pressure foaming discharge imparts excellent penetrative power
• Protects against corrosion - wear and salt
• Resistant to embrittlement over long usage

Chain and drive, heat dissipating lubricant, specifically developed for chain lubrication in conjunction with the manufacturers of the fork lift trucks. Offers maximum adhesion to chain links. Resists water wash off' and dust absorption and can be applied to running chains. High temperature resistance up to 300C. Meets military specifications - Def. Stan D/DQA/TS/CS/217/1. Pencil jet spray pattern to facilitate accurate application.
Size: 400ml.

A fast drying, high solids, high penetrating lubricant that forms a tough, durable barrier against corrosion, abrasion, dust absorption, water wash off and extremes of temperature. Suitable for use on gears in motion.
Size: 400ml.

A lubricating grease for metal/metal combinations with slow to medium-fast movements especially with high loads.
Features and Benefits
• High load-carrying capacity
• Suitable for long-term lubrication
• In mixed friction it provides wear protection due to solid lubricants and extreme pressure additives
• Good adhesion strength
• Good protection against corrosion for prolonged component lifespan

Dry film penetrant and lubricant which inhibits corrosion, displaces moisture, ideal for delicate machined parts. Non conductive, safe on paint, fabrics and most plastics, used in aviation worldwide. Conforms to NSF H2, Boeing & MIL-C-23411A specifications.

Ecocool MM is a cutting oil that reduces grinding wheel consumption and grinding burns with special additives, this increases the grinding wheel life. It's ideal for turning, drilling, milling, grinding and the machining of cast iron, modular iron, steel and all other popular aluminium alloys. This oil produces outstanding surface finishes, optimum wetting, cooling and flushing performance.
Features and Benefits
• Semi-synthetic, water miscible, multifunctional cutting fluid
• Low foaming and misting formulation
• Ideal for metalworking applications including turning, drilling, milling and grinding
• Maintains good tool cleanliness during operation
• Provides optimum wetting and cooling performance
Typical Applications
• Turning
• Milling
• Drilling
• Grinding
• Metalworking

AMS4
Multi-purpose silicone grease. XG250 silicone grease in easy to apply form.

Ambersil 500ml Non-Silicone Mould Release Agent offers exceptional release performance for thermoplastics and rubber under heavy-duty applications. With a high-temperature tolerance up to 170°C, this clear, colourless agent ensures precision and consistency while remaining non-silicone, making it ideal for sensitive moulding processes. Its flammable formulation delivers rapid application and effective coverage for professional results.
Features and Benefits
• Non-silicone formula for where silicone contamination must be avoided
• Handles demanding moulding tasks with ease
• Suitable for thermoplastics and rubber parts
• Operational up to 170°C for versatile use
• Leaves no residue, ensuring a flawless finish
• 0.7 g/sec discharge rate for quick and uniform application
• Easy to integrate into existing processes

M70214 Bearing Grease
Designed to reduce the risk of bearing failure at high temperatures. Hi-Temp extends
re-lubrication intervals and has excellent high temperature performance. It has a very high dropping point 536°F (280°C) and excellent vibration resistance. It reduces grease consumption, maintenance costs and the need for multiple greases. NLGI Grade: 2.

A durable lubricant that contains pure PTFE to produce dry 'slide' results.
Features and Benefits
• Versatile and can be used as a release agent, preventing other materials from bonding
• Ideal for use where a wet film lubricant cannot be tolerated due to dust and dirt adherence
• The durable coating resists water, oil and solvent
Typical Applications
• Food and beverage sector

Non-flammable weld anti-spatter that is a solvent based spatter release for all welding applications. It is specifically formulated to prevent splatter adhesion to surfaces and equipment and its non-flammable, non-silicone formula will not interfere with post welding operations.
Features and Benefits
• Prevents spatter adhesion to welding equipment, work pieces, surfaces, jigs, and surrounding areas
• Non-flammable with no silicone and does not affect post-welding operations
• Easily wiped away for easy cleanup
Typical Applications
• Automotive manufacture and repair
• Office furniture
• Heavy plant manufacture
• Agriculture
• Shipbuilding and dockyards
• Tool manufacturers
• Construction

A solid lubricating paste with particularly low friction coefficient for assembly and running-in of metallic components.
Features and Benefits
• Low friction coefficient for easy movement of metallic parts
• High pressure absorption capacity for heavy loads
• Prevents seizure and scoring prolonging component life and performance
• Suppresses stick-slip
• Reduces formation of fretting corrosion
• Facilitates disassembly
• Good coverage provides emergency running performance

Solent® SZ1-500B Cold Zinc Galvanising Spray provides fast drying corrosion protection and once dry will match the colour of newly galvanised metal. Ideal for protecting welded joints in galvanised structures. Can be used as a topcoat or primer. Compatible with most paint finishes. Contains no CFC's or lead. Fitted with directional spray button designed to assist application in outdoor locations with minimum over-spray.
Manufactured and tested to:
ASTM B117 (Hot Salt Spray)
BS AU 148:PT14 1969 (Natural Weathering)
DIN EN ISO 12944-1 (Corrosion Protection of Steel Structures)
500ml aerosol.

Ambersil Tufcut Metal Cutting Lubricants are based on a mixture of lubricants, extreme pressure additives, and anti-oxidants. They offer excellent resistance to extreme pressure, preventing chip welding and extending tool life.
With excellent results across a wide range of metals including stainless steel, high tensile steel, high speed and high carbon steels they are ideal for turning, drilling, reaming, tapping and thread cutting. They are also suitable for use in automatic applicators.
Features and Benefits
• Formulated to offer instant, ready to use metal machining products and exceptional performance
• Excellent resistance to extreme pressure prevents chip welding, extending tool life
• Improves heat dissipation and prevents chip welding
Typical Applications
• Metal work
• Turning
• Drilling
• Shipyard, docks and marine companies
• Heavy engineering
• Plant manufacturers
• Metal fabricators
Approvals
• Approved by AgustaWestland for machining composite materials (LIS 6045)
Notes
• Available in 350ml and 5ltr liquid, 400ml spray and 500g compound

M70514 Bearing Grease
Resists water washout with excellent resistance to fresh and salt water. Good adhesion properties. Excellent corrosion resistance. Significant load carrying capability. Reduces grease consumption. Greater degree of bearing protection.

Clear silicone grease for use on UPVC push-fit soil and waste drainage and insulation of electrical terminals.

The Pur 400 range from Ambersil is silicone release agent that has been specifically formulated to provide a fine release film. Ideal for use with integral skin and elastomeric polyurethanes.
Features and Benefits
• Provides a high quality, high gloss, even finish
• Low odour formula
• Fine spray pattern for excellent coverage and no build up on mould surface
• Suitable for use on low temperature mouldings
Typical Applications
• Injection moulding and other forming processes
• Decorative work, such as painting and plating

Hysol XF is a chlorine free, long life, multipurpose soluble metalworking fluid for general-purpose machining, grinding and heavy-duty applications. Also suitable for aerospace aluminium alloys i.e. 2024 and 7075. Incorporates advanced additive technology to prevent fungal and bacterial infections ensuring exceptional sump life. The product is suitable for use in central coolant systems and single sump machines.
Recommended concentrations:
General machining operations 5%. Heavy duty operations 5 - 10%. Grinding operations 4%.

Silcoset 152 is a versatile adhesive sealant paste designed for industrial applications, forming a resilient silicone elastomer upon air exposure. It features strong electrical insulation properties and is highly resistant to ageing, ozone, corona, and harsh chemicals, making it suitable for demanding environments. Silcoset 152 also bonds effectively with various substrates and maintains flexibility across extreme temperatures, from -60°C to +300°C. Common uses include sealing and electrical insulation in environments where durability, flexibility, and chemical resistance are essential.
Features and Benefits
• Offers strong electrical insulation, enhancing suitability for electronic and electrical applications
• Shows high resistance to ageing, ozone, and corona, ensuring long-lasting performance in various conditions
• Withstands oxidation, oils, chemicals, and solvents, enhancing durability in industrial settings
• Adheres well to a diverse range of substrates, providing flexibility for multiple applications
• Remains flexible at temperatures from -60°C to +300°C, allowing use in extreme environments
Warnings
• Corrosive

Hot dip strippable plastic coating moulds itself around the component or tool to provide 100% coverage and protect against corrosion and impacts for up to ten years. The protected component can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused.
Features and Benefits
• Easily moulds around tools and components
• Offers 100% coverage for effective protection against corrosion and impacts
• Long lasting protects for up to 10 years
• Components are easily identifiable thanks to the translucent coating
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
• Reusable for a cost effective solution
Notes
• Each block measures (L)-150mm (H)-50mm (W)-80mm.
• Block weight - 0.50kg
Warning
• Never directly apply heat to melt the protective dip, always use with a suitable melting pot.

A versatile light lubricant for use by automotive professionals and for the maintenance of mechanical handling equipment.
Features and Benefits:
• Use as a lubricant, penetrant, anti-corrosion spray or dewatering fluid
• Safe on most paints, plastics, rubbers, and all metals
• Good water displacement properties
Typical Applications:
• Mechanical handling
• Maintenance

The transparent Spectracolor is ideal for use with light metals where once applied it can be scribed or scored to show the metal against the film. The multiple colour variations can help with colour coding where necessary. The 1L and 5L variants allow you to select the right amount for the workload.
Features and Benefits
• The multiple colour variations can help with colour coding where necessary
• The 1L and 5L variants allow you to select the right amount for the workload
Notes
• Industrial methylated spirit based
*Images are for illustration purposes only*

The Faithfull Heavy-Duty Conical Connector is made from high carbon, rust-resistant steel. Its pointed end is used to deflect the ball in the grease nipple, thereby permitting the injection of grease. This connector is ideal for damaged nipples with 1/8in BSP connection and will suit most greasing applications.

This Marine Grade Anti-Seize Lubricant is a high-performance metal-free lubricant designed to protect assemblies exposed to both fresh and saltwater, making it ideal for use in marine environments. It provides excellent lubricity, superior water wash-out and spray resistance, and is particularly effective in high humidity conditions. This anti-seize formulation prevents galvanic corrosion, ensuring reliable protection of metal parts. It offers protection across a wide temperature range, from -29-1315°C. Perfect for general maintenance, rust prevention, and water-resistant applications, it is the ideal solution for demanding marine and industrial environments where long-lasting protection is crucial.
Features and Benefits
• Metal-free formula shields against damage from fresh and saltwater exposure
• Superior lubrication with resistance to both water wash-out and spray
• Guards against galvanic corrosion, ensuring extended equipment life
• Suitable for extreme temperatures ranging from -29-1315°C
• Performs reliably even in high humidity environments, offering consistent protection
Notes
• Temperature Range (°C): -29 to 1315
• Temperature Range (°F): -20 to 2400
• Temperature Resistance (°C): 1315
• Temperature Resistance (°F): 2400
Warnings
• Corrosive
• Health hazard/Hazardous to the ozone layer

Premium performance lubricant primarily designed for the lubrication of high-speed spindles in machine tools. It is also used in some critical hydraulic, circulation systems and air-line oilers where the appropriate viscosity grade is selected. It is formulated from select high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. It has good resistance to foaming and separates readily from water.
Features and Benefits
• High-quality low viscosity for easy lubrication
• Good oxidation and corrosion protection for prolonged mechanical lifespan
• Good resistance to foaming
• Separates readily from water
Typical Applications
• Engineering
• Mechanical

Perma activator screws are designed to work with perma flex & classic lubrication system where the desired lubrication period is determined by colour coded activator screw.
Features and Benefits
• Select required discharge120 cm³ in a period of 1, 3, 6 or 12 months
• The activator screw generates pressure (max. 4 bar) to move the piston forward and continuously injects small lubricant amounts
• Fully waterproof and dust-proof system that can withstand impacts and accidental knocks
• Colour-coded for easy identification and use
Typical Applications
• Perma flex lubrication system
• Perma classic lubrication system

Available in three sizes, these metric straight type hydraulic grease nipples are suited for use with Kennedy® grease guns and all other hydraulic grease equipment.
Features and Benefits
• Manufactured from steel for durability
• Available in three varying sizes to suit your specific applications
Typical Applications
• Engineering
• Fluid Handling
• Automotive

Maintain your air tools with a quality high performance air tool oil containing mineral lubricants and detergents.

ROCOL MULTISOL cutting fluid is a general purpose mineral soluble oil, suitable for use on a wide range of machines and materials. The recommended dilution ratio is 1 part Rocol Multisol to 20 parts of water.

This anti-spatter spray is ideal for the protection of welding torch parts, work pieces, fixtures and jigs. It has a special non-solvent based formula that contains no silicone or toxic chemicals. The spray can be used from any angle thanks to the compressed air canister technology, and it doesn't interfere with the welding process in any way.
Features and Benefits
• Non-solvent based formula
• Easily used from any angle
• Doesn't interfere in normal welding process
• No toxic chemicals
Typical Applications
• Welding torch parts
• Work pieces
• Fixtures and jigs

Penetrating spray with freezing action engineered for convenience and performance. An advanced formulation based on the laws of thermo-dynamics which rapidly freezes rust down to -40°C causing micro fissures to form the rust layer. The micro fissures ensure the active penetrating ingredients get to work deep into the thread and allow the fastener to be removed up to 10x faster than ordinary penetrating formulations.
Size: 500ml.

Ambergrease EXL is a lithium-calcium complex thickened, performance bearing grease, that is ideal for use on critical, high load bearings and sliding surfaces. Its high performance formula is specially designed to work on components that undergo a longer than usual service life.
Features and Benefits
• Ideal for use in applications where a longer than usual in-service life is required
• Exceptional load carrying capacity of >800Kg 4-ball weld load
• Highly visible red colouration to easily identify treated areas
• Operational Temperature range: -30°C to +150°C
Standards
• NLGI type 2
Typical Applications
• Mechanical
• Long service life machine components
• High-load bearings

These compound action diagonal cutters are ideal for cutting up to 2.5mm diameter wires. Designed for durability, the product boasts an increased jaw force, ergonomic bi material soft grip handles, heat treated jaws with a ground finish and a carbon steel forged construction.
Features and Benefits
• Carbon steel forged construction makes for a highly durable product
• Ergonomic bi-material soft grip handles improve user comfort, grip and control
• Heat treated jaws with a ground finish provide excellent gripping even over time
• Increased jaw force for provides better cutting and gripping
Typical Applications
• Plumbing
• Construction
• Electrical
Standards
• Meets or exceeds ANSI Specs

Bioweld from Ambersil is a water based spatter release agent which gives exceptional results without the use of harmful solvents, silicones or mineral oils.
Features and Benefits
• Odourless, non-flammable and does not contain silicone or solvents
• Fine spray pattern for excellent coverage with a highly effective flash-rust inhibitor
Typical Applications
• Metalwork
• Automotive
Notes:
•Automotive approval: Ford Tox No.: 163241

Castrol magna is a high quality additive free mineral oil with good resistance to oxidation and good demulsification properties.
Features & Benefits
• Highly refined to ensure suitable for applications where non additive oils can be used
• Long service life due to good quality mineral oil
• Low pour point ensures easy operation in cold condition
Typical Applications
• Bearings, spindles & compressors
• Gearboxes (moderately loaded)
• Vacuum pumps and hydraulic systems (where'ISO HH' fluid type is required)
Notes
• Classed: ISO 6743/4 - Type HH
• Stored under cover.
• Various viscosities available to suit the needs of general industrial lubrication
Warnings
• Do not store above 60°C
• Do not expose to freezing or hot sun conditions

Water-based and readily biodegradable (OECD 301B : 68%) welders anti-spatter. Suitable for use on all work pieces prior to welding, allowing post-welding removal, whilst preventing spatter adhesion.
Features and Benefits:
•Highly effective with a built-in flash rust inhibitor
•The enhanced 'low risk' formulation means that there are no hazard symbols on the can, and it is safer in use than traditional solvent spatter releases
•Solvent free, silicone free and non-flammable
•Provides users with excellent coverage and economy
Typical Applications:
•Welding

Formulated to have a wide range of operating uses. Ideal lubricant for moving chains under extreme load and for chains not fitted with automatic lubrication nor running in oil baths. Formulated with a "tacky additive" to resist "throw off" on rapidly moving chains and drives. Ideal for fork trucks/conveyer systems/motorcycle chains. Can be used as a general purpose lubricant for items subjected to extreme weather conditions. Can be used as a slideway lubricant for machine tools and has strong anti-rust qualities. Does not contain silicone or CFC's.

Arctic Hayes Silicone Grease lubricates rubber, plastics and other materials for use on valves, taps and rubber O-rings, making it an ideal plumber's grease. Complies with UK water fittings bylaws. WRAS approved.