Find Test & Measurement Products Products

The ABS AOS caliper has no limit to response speed and allows you to take reliable measurements. This caliper comes complete with the same AOS (Advanced Onsite Sensor) induction type encoder used in top-of-the-line ABS coolant-proof calipers.
Features and Benefits
• The ABS (ABSOLUTE) scale requires no origin setting after power-on
• The slider has been manufactured to provide a comfortable, smooth and stable operation
• High contrast LCD with 9mm character height to alleviate fatigue
• Electromagnetic induction type ABS encoder allows this caliper to be used without the concern for contamination on the scale face during measurement
• The detection signal is still reliable when dirty
• Long battery life

Digital Calipers available in a range of sizes which can be used for inside, outside, depth and step measuring.
Features and Benefits
• Large display for clarity
• Fast response speed
• Zero reset
• Knurled thumb grip for precise movement
• Dual readout in mm and inch
Notes
• Takes battery LR44H 1.5V
Approvals
• REACH
• ROHS
Standards
• EN 61326-1:2013
• EN 61326-2-2:2013

With Hardened and polished taper blades, enclosed in a steel case metric feeler blades from Kennedy are clearly marked for easy identification.
Features and Benefits
• Hardened and polished taper blades, enclosed in a steel case
• Blades are clearly marked for easy identification
Standards
• Manufactured to DIN 2275
Typical Applications
• Mechanical
• Engineering
Notes
• Range: 10 Blade: .05 - .80mm. 13 and 20 Blade: .05 - 1mm

Imperial Feeler Gauges are manufactured with hardened and polished taper blades.
Features and Benefits
• Clearly marked blades for easy identification
• Enclosed in a steel case to keep the blades protected
Standards
• Manufactured to DIN 2275

High quality digital calipers allow for outside, inside, depth and step measurements.
Features and Benefits
• Stainless Steel Blade and Jaws - made to last
• Metric and Imperial Scales
• LCD Display
• Highly accurate to +/- 0.02mm
• Absolute and Relative Measuring

These are a standard type of vernier caliper that offer you the following benefits:
- Main scale and vernier scale satin chrome finish gives you high readability.
- Raised sliding surfaces.

Battery Cover for ABSolute Series 500 Digimatic Calipers

Enamelled frame and tungsten carbide tipped anvils. Manufactured to BS 870.
Supplied in a durable plastic case.
Flatness: 0.6mm.
Parallelism: (2 + L/100) µm
(fraction rounded down).
Instrumental error: ±(1 + L/75) µm
(fraction rounded up).
L = maximum measuring length

This Digital External Caliper provides precise measurement for a range of items, ideal for professional and industrial use. Designed to support both imperial and metric systems, it offers unmatched convenience and ease of use. It includes a spring-loaded jaw for consistent measuring force and robust alloy jaws with a durable chrome finish. A large LCD display ensures clear and accurate readings, with seamless millimetre, inch, and fraction conversions. Perfect for external and outside odd leg measurements, this tool delivers reliability and precision, making it an essential for a variety of applications.
Features and Benefits
• Equipped with a spring-loaded jaw to ensure consistent measuring pressure
• Boasts a high-visibility LCD screen for easy-to-read measurements
• Constructed with durable alloy jaws coated in a protective chrome finish
• Provides quick conversions between millimetres, inches, and fractions for versatile use
Typical Applications
• Outside odd leg measurements
• External measurements
Notes
• Battery type CR2032 - DUR9040221K or ENR9040240K

Coolant-Proof digital calipers available in a range of sizes which can be used for inside, outside, depth and step measuring.
Features and Benefits
• Coolant, water and dust proof to IP67 level
• Large LCD display
• Fast response speed
• Dual readout in mm and inch
Approvals
• REACH
• ROHS
Standards
• EN 61326-1:2013
• EN 61326-2-2:2013

This caliper benefits from a polycarbonate frame, plus depth rod. 40mm jaw length and comes in a vinyl pouch. 4-way measurement with an accuracy of 0.2mm /0.008". Non-output type. Functions: mm/inch, zero setting, Absolute/incremental measurement.
Resolution: 0.01mm/0.0005".
Extra batteries available - Order Code EDI -904-3240K

Economy type with carbide tipped anvils. Enamel Framed.
Flatness: 0.6mm for up to 300mm
1.0mm for up to 300 - 500mm
Parallelism: 2+(L/100)mm (fraction rounded down).
L = maximum measuring length.
Metric - Ratchet Thimble

Contents
150mm (6”) Engineer’s rule, 0 - 25 and 25 - 50mm micrometers, 25mm setting standard, 10x magnification eye loupe, 150 (6”) digital caliper, 0.5 - 1.0mm 20 blade feeler gauge, 51 metric 60° screw pitch gauge, pocket scriber. Technical data handbook.

Conical precision plug-in mechanism designed for use with the Kennedy 3D Axis Gauge (KEN3022010K). The stylus is designed to break on a 'nominal fracture' before the workpiece or tester can be damaged. The unit is insulated with no electrical conductivity.
Features and Benefits
• Compatible with Kennedy 3D Axis Gauge (KEN3022010K)
• Designed to break on a 'nominal fracture' to ensure no damage to workpiece or unit
• Insulated to ensure no electrical conductivity
Typical Applications
• Testing

IP67 digital calipers complete with internal, external, height and step measurement (quadri feature).
Features and Benefits
• LCD display which is easy to read
• Resistant to water, oil, dust and coolant - Ideal for tough workshop applications
• Long battery life
• Zero setting
• Origin setting with intelligent memory that retains this setting even with the power off
• Inch/metric conversion
Notes
• Extra batteries available - Order Code ENR9040150K
• Non-Output

MW110 Basic Line Digital Calipers feature 4 way measurement with mm/inch measurement function settings with zero point at any position and thumb wheel for easy adjustment. They also feature a robust construction with all metal parts being made of hardened steel and supplied in a handy case for easy and safe storage.
Features and Benefits
• 4 way measurement
• Large LCD display for easy reading
• metric and imperial measurement functions (mm/inch)
• Robust construction with hardened steel parts
• Thumb wheel for fine adjustment
• Suppiled in a handy case for safe storage
Notes
• Extra batteries available - Order Code EDI -904-4000K

Useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 150mm with a line, thickness in hundredths of a mm.

Standard Vernier Calipers with knurled locking nut.
Features and Benefits
• Give four types of reading - inside, outside, depth and step
• Dual reading scale in metric and imperial
• 14° bevelled vernier scale to reduce parallax reading error
• Manufactured in satin finish from hardened stainless steel for rigidity
Standards
• Conform to DIN 862

Spring divider to measure distance between two points. Suitable for transferring or comparing measurements directly, or for scribing an arc, radius or circle. Adjusting washer and nut allow fast and positive adjustment. Brushed metal finish.

With knurled satin finish bodies providing positive adjustment of the hardened and radius ground plungers ensuring accurate measurement of theinternal diameter when used with a micrometer. For smaller diameter measurements use the small hole gauge.

Imperial feeler stock strips are a cost effective way to check spacing gaps of machinery during set-up and repair. Made from tempered steel for durability each piece marked with thickness and with convenient 3/16" (5mm) hole for hanging.
Features and Benefits
• Tempered steel construction for durability
• 12" long, 1/2" wide feeler stock strips with rounded ends
• Each piece marked with thickness and with 3/16" hanging hole
Typical Applications
• Engineering
• Manufacturing

Precision ground base with six button electronic gauge. Includes fine adjustment control carriage for accurate use. Six digit LCD read-out displays in Metric or Imperial. Features absolute and comparative functions. Tolerance function enables fast check of batch work. Supplied with scriber foot and clamp. Powered by CR2032 battery (supplied) and supplied with storage case.

The Moore & Wright DFC Series Digital Callipers are fitted with an extra-large, easy-to-read display. The callipers have a high measuring speed of 120in per second and you can read/convert measurements in inch, metric and fractions. The frame is made from stainless steel and provides extra smooth movements when measuring. Supplied with a CR2032 battery. Specification Range 0-150mm (0-6in). Resolution 0.01mm (0.0005 / 1/128 in). Jaws 40mm.

The Faithfull Portable Electronic Scale is ideal for both luggage and fishing. The scale can measure weight in kilograms, pounds, and ounces. It has tare, zero, and overload functions. A LCD display with backlight allows easy reading, and the scale is supplied complete with a steel hook and nylon strap. Requires 2 x AAA batteries (not supplied). Maximum capacity 50kg.

A large headed nut and screw assembly provides a firm and rigid friction joint, with no play. Manufactured from polished tool steel.
Size - 200mm/ 8inch or 300mm/ 12inch.
The sizes listed are the effective leg length which is measured from the joint assembly.

The Facom Round Tip Feeler Gauge made from polished, hardened and tempered steel. With straight, metirc blades.

Designed to measure the thickness of materials, these dial calipers are available in various sizes to suit your requirements.<CRLF><CRLF>Features and Benefits<CRLF>• Gives a metric and imperial reading<CRLF>• Scale division 0.02mm and 0.001in<CRLF>• Dial rotates for zero adjustment<CRLF>• Fine adjustment thumb wheel<CRLF>• Multiple sizes available<CRLF><CRLF>Typical Applications<CRLF>• Engineering<CRLF>• Construction<CRLF>• DIY

Lightweight, well balanced and rigid. Satin chrome finish with hardened, ground and lapped measuring screw. Each micrometer of <300mm (12") is supplied with handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars designed for making up for the limited stroke of the micrometer head. Each rod marked with length.
Easily reset - adjustment positive and permanent. High grade steel anvil, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer.
Accuracy:
Instrument error: ±(6+L/50)µm.
L = maximum measuring length.
Inch Sets - Graduated: 0.001"

Manufactured to BS 870.
Supplied in a durable plastic case.
Flatness: 0.6mm.
Parallelism: (2 + L/100) µm
(fraction rounded down).
Instrumental error: ±(1 + L/75) µm
(fraction rounded up).
L = maximum measuring length

Featuring large digital display and carbide tipped measuring faces. With ball end cap for measuring curved surfaces, auto power on/off and mm/inch conversion. Ratchet stop for consistent measurement and locking device. Complete with case, spanner and battery.

Solid nut.
Points are hardened and ground to allow for marking out.
The nominal size is distance between the centre of the nut and screw or roller and the working ends of the legs.

Useful for shimming in fixture and die work. Supplied in a compact, sturdy plastic rewindable dispenser case. Rewind feature, minimises accidental damage. Made of the finest tempered steel, marked every 6" with a line, thickness in thousandths of an inch.

Adjustable Point
Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. Each firm joint caliper has an adjustable ground point which can be retracted for storage and the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.

Lightweight carbon fibre construction. 8mm High figures in LCD display for ease of reading. Metric and imperial measuring functions with conversion between the two. Zero setting control allows for comparative measurement.

This vernier caliper with thumb clamp only moves when you depress the spring-loaded thumb grip.
14° vernier face angle. Incorporates Quadri feature.