Find Measuring & Test Equipment Products

The ABS AOS caliper has no limit to response speed and allows you to take reliable measurements. This caliper comes complete with the same AOS (Advanced Onsite Sensor) induction type encoder used in top-of-the-line ABS coolant-proof calipers.
Features and Benefits
• The ABS (ABSOLUTE) scale requires no origin setting after power-on
• The slider has been manufactured to provide a comfortable, smooth and stable operation
• High contrast LCD with 9mm character height to alleviate fatigue
• Electromagnetic induction type ABS encoder allows this caliper to be used without the concern for contamination on the scale face during measurement
• The detection signal is still reliable when dirty
• Long battery life

This precision tool has a line of chords scale for use in measuring angles, measures diameters up to 600mm (24") and the equivalent circumference can be read directly from the rule. The rule is flexible and rustless with deep etched figures filled with black ink

Engineer's squares are manufactured from hardened and tempered stainless steel.
Features and Benefits
• Edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade

Digital Calipers available in a range of sizes which can be used for inside, outside, depth and step measuring.
Features and Benefits
• Large display for clarity
• Fast response speed
• Zero reset
• Knurled thumb grip for precise movement
• Dual readout in mm and inch
Notes
• Takes battery LR44H 1.5V
Approvals
• REACH
• ROHS
Standards
• EN 61326-1:2013
• EN 61326-2-2:2013

With Hardened and polished taper blades, enclosed in a steel case metric feeler blades from Kennedy are clearly marked for easy identification.
Features and Benefits
• Hardened and polished taper blades, enclosed in a steel case
• Blades are clearly marked for easy identification
Standards
• Manufactured to DIN 2275
Typical Applications
• Mechanical
• Engineering
Notes
• Range: 10 Blade: .05 - .80mm. 13 and 20 Blade: .05 - 1mm

With a hardened and tempered, steel blade, ground stock and blind riveted construction, the range of Moore and Wright engineers squares are abrasion resistant and are finished with a satin chrome look.
Features and Benefits
• Precision ground blades and stock for accuracy
• Durable blind riveted construction
• Hardened tempered steel blades for prolonged tool lifespan
Typical Applications
• Engineering
• Workshop
• On site
Notes
• Conforms to standards BS939 / Grade B

The Kennedy range of circular inspection mirrors feature a ball and socket universally positional joint, holding the high grade distortion free mirror at any angle. They come mounted on chrome plated high polish finish telescopic shafts.
Features and Benefits
• Ball and socket universally positional joint for easy positioning
• High grade distortion-free mirror
• Durable chrome plated high polish finish telescopic shafts
Specifications
1.1/4"
• Diameter: 30mm
• Includes high power magnet and pocket clip
• Length Closed/Open (180/480mm)
2"
• Diameter: 50mm
• Length Closed/Open (280/420mm)
Typical Applications
• Inspection
• Automotive
• Engineering

The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5mm intervals and numbered every 50mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.

High quality steel rule permanently marked in Metric and Imperial graduations. Includes hanging hole.

Imperial Feeler Gauges are manufactured with hardened and polished taper blades.
Features and Benefits
• Clearly marked blades for easy identification
• Enclosed in a steel case to keep the blades protected
Standards
• Manufactured to DIN 2275

Measuring 600mm/24”, this folding steel rule is manufactured from spring tempered stainless steel with a polished finish and it is both flexible and rustlesss. A strong, solid performer for the engineer.

High quality digital calipers allow for outside, inside, depth and step measurements.
Features and Benefits
• Stainless Steel Blade and Jaws - made to last
• Metric and Imperial Scales
• LCD Display
• Highly accurate to +/- 0.02mm
• Absolute and Relative Measuring

Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy when measuring internal and external radii. Enclosed in a steel case.
Featrures and Benefits
• Hardened and polished steel for increased durability
• With precision milled blades for accuracy
• Used to measure internal and external radius
• Enclosed in a steel case for easy storage and portability
• Available in imperial and metric measurements

These are a standard type of vernier caliper that offer you the following benefits:
- Main scale and vernier scale satin chrome finish gives you high readability.
- Raised sliding surfaces.

Engineer's spring tempered rigid steel blades. Made from the finest quality spring tempered stainless steel and finished in satin chrome. Anti-glare finish with permanent black figures and graduations.
Features and Benefits
• Anti-glare finish with permanent black figures and graduations for easy reading
• Round end complete with hanging hole for easy storage
• Anti-rust
Notes
• Accuracy: ± 0.2mm full scale
• Constant at 20°C
• Metric - subdivided to 0.5mm and 1mm, figured every 10mm
• subdivided to 1/16 inch, 1/32inch and 1/64inch, figured every inch

UT330 series meters measure temperature and humidity with low power consumption and high precision. Measurement data to be saved and exported to PC software for further analysis. These meters can be used in factories, laboratories, research institutes, food, health, environmental protection, and other fields.
Features and Benefits
• Display temperature, humidity and dew point temperature selection together
• ℃/℉ Selectable
• Customised measurement compensation
• Record interval, system time and sleep time settings
• MAX/MIN modes
• 100 sets data storage, manual/auto storage modes

This two piece set includes a Smile Dial Plunger Type Gauge as well as a lever Switchable Universal 2 Mag Stand.
Features and Benefits
• Mag stand possesses two magnetic faces and a large vee for clamping
• Gauge possesses a matt finish with chromed housings and black oxidised limit hands
• Gauge is fitted with 1/4in. inside diameter, an off-set back lug and 5/16in. diameter stem
• Supplied with both a universal magnetic stand as well as a smile dial plunger type gauge
Typical Applications
• Manufacturing
Standards
• Gauge manufactured to BS 907

40mm Diameter Face
Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240°. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Ball and socket universally positional joint, holds the high grade distortion free mirror at any angle. Chrome plated high polish finish telescopic shafts.
Rectangular Mirror
Mirror size: 90 x 50mm.

Battery Cover for ABSolute Series 500 Digimatic Calipers

Fitted as standard to KEN- 333-2030K, - 2050K and - 2110K two magnetic faces, bottom and back face. Large vee for curved surfaces.
Threaded: M8 x 1.25mm.
Base dimensions: 60 x 50 x 55mm.
Magnetic pull: 50kg.

Enamelled frame and tungsten carbide tipped anvils. Manufactured to BS 870.
Supplied in a durable plastic case.
Flatness: 0.6mm.
Parallelism: (2 + L/100) µm
(fraction rounded down).
Instrumental error: ±(1 + L/75) µm
(fraction rounded up).
L = maximum measuring length

Fitted with a main, cross and plumb vial. Precision ground cast base with a v-groove for cylindrical surfaces. The main vial is protected by a rotating shroud and has a sensitivity of one minute. Resolution: 0.3mm per metre and 0.0035" per foot.

All rustless rules up to and including 600mm/24" have an anti-glare, easy to read finish with permanent black figures and graduations. 600mm/24" are constructed using standard rustless steel for improved durability. <CRLF><CRLF>Features and Benefits<CRLF>• Anti glare and easy to read display<CRLF>• Rustless steel construction for durability<CRLF><CRLF>Specifications<CRLF>• Round end - rigid blade. 2 sides - 4 edges<CRLF>• Metric - subdivided to mm, 0.5mm, figured every 10mm<CRLF>• Inch - subdivided to inches, 1/16", 1/32", 1/64", 1/10", 1/20", 1/50", 1/100"<CRLF>• Metric graduations conform to BS 4372: 1968 <CRLF><CRLF>Typical Applications<CRLF>• Engineering<CRLF>• Workshop<CRLF>• Industrial

These are called taper gauges only because of their shape - they do not measure tapers. They are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered steel. 0.1mm increments. Rustless. Constant at 20°C. Satin chrome anti glare finish. Permanent black figures and graduations.

This Digital External Caliper provides precise measurement for a range of items, ideal for professional and industrial use. Designed to support both imperial and metric systems, it offers unmatched convenience and ease of use. It includes a spring-loaded jaw for consistent measuring force and robust alloy jaws with a durable chrome finish. A large LCD display ensures clear and accurate readings, with seamless millimetre, inch, and fraction conversions. Perfect for external and outside odd leg measurements, this tool delivers reliability and precision, making it an essential for a variety of applications.
Features and Benefits
• Equipped with a spring-loaded jaw to ensure consistent measuring pressure
• Boasts a high-visibility LCD screen for easy-to-read measurements
• Constructed with durable alloy jaws coated in a protective chrome finish
• Provides quick conversions between millimetres, inches, and fractions for versatile use
Typical Applications
• Outside odd leg measurements
• External measurements
Notes
• Battery type CR2032 - DUR9040221K or ENR9040240K

Coolant-Proof digital calipers available in a range of sizes which can be used for inside, outside, depth and step measuring.
Features and Benefits
• Coolant, water and dust proof to IP67 level
• Large LCD display
• Fast response speed
• Dual readout in mm and inch
Approvals
• REACH
• ROHS
Standards
• EN 61326-1:2013
• EN 61326-2-2:2013

White plastic thermometer designed for wall mounting with Celsius and Fahrenheit temperature scale printed in black.
Features and Benefits
• Black printed temperature scale for clear visibility
• Versatile, for indoor and outdoor use
• Manufactured from high impact styrene for durability
Typical Application
• Home
• Garden
• Indoor

Matched and numbered pairs of close grained iron castings accurately machined. Precision 90° vee blocks. Supplied as a pair.

This caliper benefits from a polycarbonate frame, plus depth rod. 40mm jaw length and comes in a vinyl pouch. 4-way measurement with an accuracy of 0.2mm /0.008". Non-output type. Functions: mm/inch, zero setting, Absolute/incremental measurement.
Resolution: 0.01mm/0.0005".
Extra batteries available - Order Code EDI -904-3240K

30mm Diameter
The original 'Linen tester'. Although deriving its name from the textile industry it is also suitable for inspecting paper, photographs, printed documents etc. 30mm diameter glass lens. 6x magnification. 38mm (11/2") working distance. 25mm (1") square field. Metric and inch graduations. 1mm and 1/8" divisions. Self-standing to free your hands. Folds flat when not in use. Black powder coated body. Complete with plastic wallet.

The range of Kennedy round end engineers rulers are made from spring tempered flexible steel blades with permanent black figures and graduations. With rustless properties and 12mm blade width and and a satin chrome anti-glare finish they are extremly easy to read with EEC Class one accuracy (/- 0.2mm full scale). Features a handy hanging hole for easy storage.
Features and Benefits
• Spring tempered flexible steel blades with round end
• Anti-glare properties
• With hanging hole for easy storage
• Permanent black figures and graduations
• ECC Class one accuracy
Typical Applications
• Measurements
• Engineering
• Industrial
• Workshop
• On site
Notes
• Available in imperial and metric measurements

Economy type with carbide tipped anvils. Enamel Framed.
Flatness: 0.6mm for up to 300mm
1.0mm for up to 300 - 500mm
Parallelism: 2+(L/100)mm (fraction rounded down).
L = maximum measuring length.
Metric - Ratchet Thimble

Contents
150mm (6”) Engineer’s rule, 0 - 25 and 25 - 50mm micrometers, 25mm setting standard, 10x magnification eye loupe, 150 (6”) digital caliper, 0.5 - 1.0mm 20 blade feeler gauge, 51 metric 60° screw pitch gauge, pocket scriber. Technical data handbook.

For re-shaping. Can be used in the hand to deliver a series of blows to the underside of the panel. Long crown enables use in hard to reach areas.

Conical precision plug-in mechanism designed for use with the Kennedy 3D Axis Gauge (KEN3022010K). The stylus is designed to break on a 'nominal fracture' before the workpiece or tester can be damaged. The unit is insulated with no electrical conductivity.
Features and Benefits
• Compatible with Kennedy 3D Axis Gauge (KEN3022010K)
• Designed to break on a 'nominal fracture' to ensure no damage to workpiece or unit
• Insulated to ensure no electrical conductivity
Typical Applications
• Testing