Screwed Studding, Metric - BZP (Bright Zinc Plated) Grade 8.8 - Threaded Rod - DIN 975
Colour-coded at each end of length for easy identification as shown. Length: 1m.
These threaded rods and screwed Studding provide an excellent cost-effective solution to a wide range of fastening applications.
Features and Benefits
• Bright electroplated Zinc Finish to prevent corrosion
• Min. Proof Load 580 MPA
• Suitable for use in conjunction with other fastening products
Standards
• DIN 976 (supercedes DIN 975)
Screwed Studding
BSW
Steel Grade 4.8
Threaded Rod
Mild Steel, Grade 4.6 Zinc-Plated: UNC
Colour-coded at each end of length for easy identification as shown.
Screwed Studding
Steel - Grade 12.9
Threaded Rod
DIN 975
Metric
Screwed Studding
Metric
Stainless Steel A4
Grade 70
Threaded Rod
DIN 976-1A
Screwed Studding
UNC
Steel - Grade B7
Threaded Rod
ASTM A193
These Forgefix Threaded rods are bright Zinc Plated for increased corrosion resistance, and provide a cost effective fastening solution for many varied applications. They can be used with many other products including Drop In Anchors and Masonry Anchor Shields. Conform to DIN 975 standards. APPLICATIONUsed widely in the soft furnishing trades where strong timber connection is required. Also extensively used in Playground and Climbing Wall manufacturing.Ideal for use in chemical fixing applications where non standard sizes are required. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
Colour-coded at each end of length for easy identification as shown.
Screwed Studding,
Metric Fine,
BZP ( Bright Zinc Plated),
Grade 8.8,
DIN 975.
High Tensile Steel - Grade 8.8: Metric
Colour-coded at each end of length for easy identification as shown.
Screwed Studding
Metric
Steel - Grade 4.8
Threaded Rod
DIN 976-1A
Screwed Studding
Metric
Steel BZP (Bright Zinc Plated) Grade 4.8
Threaded Rod
DIN 976-1A
Mild Steel - Grade 4.6 Self-Colour: UNF
Colour-coded at each end of length for easy identification as shown.
Studding connectors or coupling nuts are for connecting multiple lengths of threaded rod. Made from low carbon steel and bright zinc-plated. Available to purchase in varying sizes.
Features and Benefits
• ISO Metric threaded for ease of insertion
• Manufactured from steel for durability and product longevity
• Available in a range of sizes to allow you to select the product that suits your needs
• Bright Zinc Plating (BZP) bolsters the corrosion resistance of the product
Typical Applications
• Engineering
• DIY
• Construction
Standards
• Conforms to DIN 6334
Made from Grade 4.6 mild steel with a plain finish, this range of screwed studding is ideal for stabilising concrete or wood as well as threading two components together. Each product is colour-coded at each end of length for easy identification and has a right hand thread. Available in a range of sizes.
Features and Benefits
• Colour coded ends allow for easy identification of the correct product size
• Available in a variety of thread sizes to suit your particular applications
• Mild steel construction is durable and robust
Typical Applications
• Construction
• Engineering
• DIY
Standards
• DIN 975
• DIN 6334
Stainless Steel A2: Metric
Colour-coded at each end of length for easy identification as shown.
Screwed Studding, Metric - BZP (Bright Zinc Plated) Grade 8.8 - Threaded Rod - DIN 975
Zinc plated threaded rod metre lengths. Manufactured to DIN 975 with high tensile strength grade 8.8 steel. Supplied in sizes 6-16mm in two mm increments as well as 20 and 24mm.
These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications. They can be used with many other products including Drop in Anchors and Masonry Anchor Shields, and provide a cost effective fastening for many applications. Conform to DIN 975 standards. APPLICATION:Used widely in the soft furnishing trades where strong timber connection is required. Also extensively used in Playground and Climbing Wall manufacturing.Ideal for use in chemical fixing applications where non standard sizes are required. A2 Type 304 Stainless Steel can also be called 18/8 because it contains approximately 18% Chromium and 8% Nickel. It is austenitic steel and is non-magnetic. The chromium provides a corrosion and oxidation resistance, although it may tarnish. It is immune to foodstuffs, sterilising solutions, most organic chemicals and dyestuffs and also a wide variety of inorganic chemicals. As such, it is used extensively for many types of fixings and fasteners used in sanitary or hygiene applications.
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
Mild Steel - Grade 4.6 Zinc-Plated: Metric
Colour-coded at each end of length for easy identification as shown.
Screwed Studding
Steel - Grade 8.8 Galvanised
Over Sized - Threaded Rod
Metric
DIN 976.1A
Screwed Studding
A4 Stainless Steel
Grade 70
Metric
DIN 976-1A
Screwed Studding
UNC
Steel - Grade B7/2H
Stud Bolt With 2 Hex Nuts
BS 4882
Screwed Studding
Metric
Steel BZP (Bright Zinc Plated) - Grade 4.8
Left Hand Threaded Rod
DIN 976-1A
Screwed Studding
Metric
Steel BZP (Bright Zinc Plated) - Grade 8.8
Left Hand Threaded Rod
DIN 976-1A
The Qualfast® CU2/CU3 grade threaded rods provide excellent strength for a wide range of fastening applications.
Features and Benefits
• High tensile strength for reliable hold
• Solid brass for strength and durability
Standards
• DIN 976-1A
Metric and Colour-coded at each end of length for easy identification as shown.
Mild Steel - Grade 4.6 Zinc-Plated: Metric
Colour-coded at each end of length for easy identification as shown.
Manufactured from A2 Stainless Steel, these threaded rids are available in a range of metric sizes. Colour-coded at each end of length for easy identification, the product is suited for general purpose applications.
Features and Benefits
• Manufactured from A2 steel for durability and resilience
• Colour coded at each end to help you easily identify the correct size
• Available in a range of sizes to suit your requirements
Typical Applications
• DIY
• Engineering
• Construction
Standards
• DIN 976
These threaded rods are manufactured from carbon steel class 8.8, for use with bonded anchors.
Features and Benefits
• Versatile and suitable for outdoor use and in damp conditions
• Hexagonal head allows for convenient use with torque wrench
Typical Applications
• Fastening with bonded anchors
• Balustrading and handrails
• Barriers
• Cable trays
• Consoles
• Curtain walling
• Formwork support systems
• Heavy machinery
• Lamps
• Safety barriers
• Road signs
• Railings
• Public seating
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
Stainless Steel A2: Metric
Colour-coded at each end of length for easy identification as shown.
Screwed Studding
UN
Steel - Grade B7/2H
Stud Bolt With 2 Hex Nuts
BS 4882
Screwed Studding
UNC
Stainless Steel Gr.B8 / Gr.8
Stud Bolt With 2 Hex Nuts
BS 4882
Screwed Studding
UNC
Stainless Steel Gr.B8M / Gr.8M
Stud Bolt With 2 Hex Nut
BS 4882
Screwed Studding
Metric
Steel - Grade B7/2H
Stud Bolt With 2 Hex Nuts
BS 4882
Screwed Studding
Metric
Steel - Grade 8.8 - Galvanised
Threaded Rod
DIN 976-1A
Screwed Studding
Metric
Steel Grade B7
Threaded rod
ASTM A193M
Screwed Studding
Metric Fine
Steel BZP (Bright Zinc Plated) - Grade 4.8
Threaded Rod
DIN 976-1A
Screwed Studding
Metric
Steel - Grade 5.8
Trapezoidal Thread
ISO-metric trapezoidal thread according to DIN 103, straightness of threaded rods according to ISO 2768-K.
Screwed Studding
BSW
Brass CU2/CU3
Threaded Rod
High Tensile Steel - Grade 8.8 BZP: Metric
Colour-coded at each end of length for easy identification as shown.
Steel 21CrMoV5-7+QT/25CrMo4+QT
Screwed Studding
Metric
Stainless Steel A2 - Grade 70
Left Hand Threaded Rod
DIN 976-1A
The MasonMate Hot Dipped Galvanised Stud is made from Grade 5.8 Mild Steel. Complete with a nut, washer and stud end cut at 45° with hexagon drive. For use with resin systems.
The MasonMate Zinc Plated Stud is made from Grade 5.8 Mild Steel and comes complete with a nut, washer and stud end cut at 45° with hexagon drive. For use with resin systems.
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
Welding Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
For use in most construction jobs and materials including concrete, brickwork and stone.
For use in most construction jobs and materials including concrete, brickwork and stone.
M27x2 Metric Male x 16mm Tube Outside Diameter, Male Stud with Seal Edge, S Series, Maximum Working Pressure 400 bar, VOSS
M22x1.5 Metric Male x 20mm Tube Outside Diameter, Male Stud with Seal Edge, S Series, Maximum Working Pressure 400 bar, VOSS
1" BSP Parallel Male x 38mm Tube Outside Diameter, Male Stud with Seal Edge, S Series, Maximum Working Pressure 200 bar, VOSS
M16x1.5 Metric Male x 12mm Tube Outside Diameter, Male Stud with O Ring Seal, S Series, Maximum Working Pressure 630 bar, VOSS
M18x1.5 Metric Male x 12mm Tube Outside Diameter, Male Stud with Peflex Seal Ring, L Series, Maximum Working Pressure 400 bar, VOSS
M16x1.5 Metric Male x 15mm Tube Outside Diameter, Male Stud with Peflex Seal Ring, L Series, Maximum Working Pressure 400 bar, VOSS
M48x2 Metric Male x 42mm Tube Outside Diameter, Male Stud with Peflex Seal Ring, L Series, Maximum Working Pressure 250 bar, VOSS
Threaded Bolt Frb-D-Mini for Combination of Individual D Series Service Units. Corrosion Resistance Classification Crc=2 - Moderate Corrosion Stress, Materials Note=Free of Copper and Ptfe, Festo
M16x1.5 Metric Male x 15mm Tube Outside Diameter, Male Stud with Peflex Seal Ring, L Series, Maximum Working Pressure 400 bar, VOSS
M27x2 Metric Male x 16mm Tube Outside Diameter, Male Stud with Peflex Seal Ring, S Series, Maximum Working Pressure 420 bar, VOSS
Pre-assembly Stud for CBV-10 Flared Coned Assembly, to Suit 22 x 1.5mm Tube Outside Diameter, Light Series, VOSS
3/8" BSP Parallel Female x 10mm Outside Diameter, Stud, Light Duty, Steel, Maximum Working Pressure 315 bar, VOSS
M10 Thread Size, Stainless Steel Threaded Rod, Length 1000mm, 304 Stainless Steel, Flamco
M27x2 Metric Male x 20mm Tube Outside Diameter, Male Stud with O Ring Seal, S Series, Maximum Working Pressure 420 bar, VOSS
M8 Thread Size, Stainless Steel Threaded Rod, Length 1000mm, 304 Stainless Steel, Flamco
M42x2 Metric Male x 30mm Tube Outside Diameter, Male Stud with Seal Edge, S Series, Maximum Working Pressure 200 bar, VOSS
M48 x 2 Metric Male x 42mm Outside Diameter, DIN 2353, Tube Fitting, L Series, Form B, Male Stud Coupler, Steel, Conexa
M6 x 1.0 Metric Male x 6mm Outside Diameter, Stud Rotary One Touch Push-in, Fast Rotating, Working Temperature -5┬░C to +60┬░C, Maximum Working Pressure 10 bar, FT Pro
M10x1.25 Metric Male, Malleable Iron Accessory, 3 Metre Length, Studding, FT Pro
3/8" BSP Taper x 12mm Outside Diameter, Male Stud, Stainless Steel, Working Temperature -20° C to +70°C, Maximum Working Pressure 250 bar, C Matic
M5 Metric Male x 4mm Outside Diameter, Male Stud, Stainless Steel, Working Temperature -20° C to +70°C, Maximum Working Pressure 250 bar, C Matic
1/2" BSP Taper x 12mm Outside Diameter, Male Stud, Stainless Steel, Working Temperature -20° C to +70°C, Maximum Working Pressure 250 bar, C Matic
1/2" Thread, 14mm Tube O/D, Male Hex Studs, Working Temperature -10°C to +60°C, Maximum Pressure 0 to 8 bar, Aignep
3/8" Thread, 14mm Tube O/D, Male Hex Studs, Working Temperature -10°C to +60°C, Maximum Pressure 0 to 8 bar, Aignep