Large Head
For all applications of blind riveting. Aluminium rivet head with steel mandrel. Medium strength, use with aluminium and where rust is a problem. Select grip based on thickness of material to be riveted.
A taper pin is a fastener used in mechanical engineering. They are steel rods with one end having a slightly larger diameter than the other. Standard inch-sized taper pins have a taper on diameter of 1:48 while metric ones have a taper of 1:50.
Countersunk
For all applications of blind riveting. Aluminium rivet head with steel mandrel. Medium strength, use with aluminium and where rust is a problem. Select grip based on thickness of material to be riveted.
Assorted Split Cotter Pins
Zinc plated to prevent rust.
Contents: 1/16" x 1" - x150, 3/32" x 1" - x150, 3/32" x11/2" - x100, 1/8" x 11/4" - x75, 1/8" x 2" - x50 and 5/32" x 21/2" - x30.
For all applications of blind riveting. Aluminium rivet head with steel mandrel. The rivet mandrel is passed through the nose piece of a suitable riveting tool and the rivet body is placed in a prepared hole in the assembly to be fastened. The riveting action pulls the mandrel head into the body of the rivet, so opening it to form an envelope around the mandrel head. When the rivet has been fully deformed and the assembly firmly drawn together, the mandrel breaks at a pre-determined load. The riveter may then be withdrawn and reloaded.
Dome Head
For all applications of blind riveting. Aluminium rivet head with steel mandrel. Medium strength, use with aluminium and where rust is a problem. Select grip based on thickness of material to be riveted.
Hardened and precision ground. Conform with DIN 6325.
Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.
Tolerances:
3mm = +0.002 +0.008
4 - 6mm = +0.004 +0.0012
8 - 10mm = +0.006 +0.0015
12 - 16mm = +0.007 +0.0018
This range of Metric Extractable Dowel Pins with Air Flats are ideal for use when keeping machine components locked together or for aligning purposes. Available in a range of sizes, each component is manufactured from steel and has a plain finish.
Features and Benefits
• Available in a range of metric sizes to suit your needs
• Manufactured from steel for maximum durability and product longevity
• 'As produced' oiled finish (black) - Provides some shelf life but no real corrosion protection in use
Typical Applications
• Engineering
• Automotive
• Construction
Standards
• DIN 7979D
• NEN 2464
• ISO 8735A
Single Spring Cotter Pin
Metric
A2 Stainless Steel
DIN 11024
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.
A taper pin is a fastener used in mechanical engineering. They are steel rods with one end having a slightly larger diameter than the other. Standard inch-sized taper pins have a taper on diameter of 1:48 while metric ones have a taper of 1:50.
Parallel/Dowel Pin,
Metric,
Steel - (Self-Colour),
DIN 7.
Parallel/Dowel Pin,
Metric,
A1/A2 Stainless,
DIN 7.
DIN ≈6325
Steel 60 ± 2HRc
h6
Split/Cotter Pin
Metric
Steel
BZP (Bright Zinc Plated)
DIN 94
Blind Countersunk Rivet Nut,
Open Serrated Shank,
Metric,
Steel,
BZP ( Bright Zinc Plated).
OMNI - Standard Open Rivets
Hardened and precision ground. Conform with DIN 6325.
Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.
Tolerances:
All sizes = +0.001” +0.003”.
Assortment box of 200 splined and threaded rivet nuts.
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.
These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings.
The Rapid stainless steel rivets are made from ISO 304 standard stainless steel and are ideal for use with Rapid Hand Riveter tools. Ideal for all applications, these hardwearing and long lasting rivets ensure a permanent fix. They are particularly useful in humid areas and outside areas, on number plates, mudguards, metal coverings, greenhouses, lawnmower coverings and metal sheet roofing. Each pack is supplied with a drill. Suitable for the RP40 and PR100 riveters.
These metric extractable dowel pins are ideal for securing materials and marking points in machinery. The hollow structure allows the pin to be extracted with ease when needed and the product can be purchased in a range of lengths. Manufactured from steel with a plain, as produced finish.
Features and Benefits
• Available in a range of metric sizes to suit your needs
• Manufactured from steel for durability
• Air flat allows the pin to be extracted when necessary
Typical Applications
• Engineering
• Automotive
• Construction
Standards
• DIN 7979D
• NEN 2464
• ISO 8735A
These Metric Extractable Dowel Pins possess a hollow design to allow you to extract the pins when necessary. Designed for marking in machinery as a reference point, each pin is manufactured from steel and has a 10mm diameter and varies in length.
Features and Benefits
• Available in a range of metric sizes to suit your needs
• Air flat hollow inner allows you to easily extract the pin when necessary
• Manufactured from steel for durability
Typical Applications
• Engineering
• Automotive
• Construction
Standards
• DIN 7979D
• NEN 2464
• ISO 8735A
Steel taper pin with internal thread ground
Stainless Steel A4
Spring Type Slotted Straight Pin
Metric
Steel - Standard (Self - Colour)
Light Duty
DIN 7346
Spring Type Straight Pin (Spiral Pin) Coiled
Metric
Spring Steel (420-560 - HV30)
Standard Duty- (Spiral Pin) - DIN 7343
Spring Type Straight Pin (Spiral Pin) Coiled
Metric
A2 Stainless Steel
Standard Duty
DIN 7343
Spring Cotter Pin
Metric
Single
A4 Stainless Steel
A range of metric split/cotter pins. Self coloured and used to lock nuts securwly into place. Made from quality steel.
Features and Benefits
• Effective stoppage of nuts unscrewing to keep you working securely and safely
• Available in a variety of specifications to meet individual needs
Notes
Meets standards DIN 94 and ISO 1234
Split Pin (Cotter Pin)
Metric
A4 Stainless Steel
DIN 94
Blind Rivet Nut
Cylindrical
Open Serrated Shank
Steel Zinc Plated
3 OCH 25
OMNI - Standard Open Rivets
Rivet Nut - Drive Screw,
Metric,
Ni - Nickel Plated.
MULTI - Open Rivets With A Large Grip Range
Dome Head
For all applications of blind riveting. Aluminium rivet head with steel mandrel. Medium strength, use with aluminium and where rust is a problem. Select grip based on thickness of material to be riveted.
Aluminium load spreading rivets (Peel type) with standard flange, manufactured to DIN 7337.
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the work.For use with the Bostitch headless pinner.
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.
These Panel Pins are ideal for lightweight and decorative tasks. For corrosion resistance, the pins are sheradised. The shape of the pins helps to reduce splitting in hard or brittle timber. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings. Sheradisation is the process of choice for fixings or fasteners that require long-term corrosion resistance. The sheradised finish is a thermal diffusion process, in which Zinc powder is vaporised and diffuses into the surface of the fastener or fixing to form a sacrificial corrosion protective Zinc /Iron alloy coating which dramatically increases the nails' durability.
The ForgeFix Dome Head Rivet has a steel-plated stem and Aluminium head which provides a neat appearance with a low profile. This rivet is the most versatile and commonly specified head style. The dome head has a diameter double that of the rivet body providing more than sufficient bearing surface to retain all but the extremely soft or brittle materials.The rivet assembly is inserted into a hole drilled through the parts to be joined together and can be finally fixed by use of a hand held or pneumatic rivet gun.
The Rapid Standard Rivets have standard aluminium heads and steel pins. They are suitable for use in decorating, repair of metal and automotive applications and can be used on sheet metal, hard plastic and leather parts. Suitable for the RP10, RP40, RP60 ad RP101 Riveters.
The Rapid tubular rivets are special, 2-piece decoration rivets which are ideal for use with leather, textiles and plastics. Use to decorate or repair clothing, shoes and many more. Simply punch the hole with the Rapid RP03 pliers and then bring the 2 parts of the tubular rivets together and fix with a small hammer. The rivets are made from high grade aluminium for strength and durability.
Spring Type Straight Pin (Spiral Pin) Coiled
Metric
A2 Stainless Steel
Standard Duty
DIN 7343
• Manufactured to strict ISO 8734B standards for precise dimensions and consistent quality<CRLF>• Hardened and ground steel construction ensures strength and durability, providing reliable support for assembled components<CRLF>• Designed for easy insertion and secure fitment, simplifying assembly processes and ensuring reliable performance
The BlueSpot 100 PCE Nut Rivets (M3 - M6) are designed to be used with a nut riveter to place permanent threads in pre-drilled holes when fixing two materials together.
4 DIFFERENT SIZES: This assortment of 1000 blind rivets contains 4 different sizes. DURABLE: Each rivet has an aluminium head and strong steel shank. STORAGE CASE: The set of blind rivet nuts is housed in a handy storage case for convenience.
Aluminium pin and zinc-plated steel rivets. Assorted pop rivets. Suitable for joining wood, metal and plastic. Includes sizes: 3.2 x 6mm, 3.2 x 8mm, 3.2 x 10mm, 3.2 x 12mm, 4.0 x 6mm 4.0 x 8mm, 4.0 x 10mm, 4.0 x 12mm, 4.8 x 10mm, 4.8 x 12mm and 4.8 x 14mm. Handy storage case with compartments.
COMPLETE WOODWORKING KIT: The 84-piece set includes all the tools and accessories needed to create precise dowel joints including 3 brad point drill bits 6 dowel centres 3 drill stop collars a hex key and a drill guide. THREE COMMON DOWEL SIZES: Create strong and accurate joints in 6mm 8mm and 10mm sizes perfect for a wide range of woodworking projects. ADJUSTABLE JIG: The handheld dowel jig is adjustable allowing for use with different wood thicknesses and ensuring consistent alignment for professional-quality joints. PRECISE ALIGNMENT: Designed to achieve durable joints with precise and consistent alignment reducing the risk of misaligned joints and enhancing the overall strength of your work. INCLUDES 70 DOWEL PINS: The kit comes with 70 wooden dowel pins in the three most common sizes: 30 x 6mm x 30mm 20 x 8mm x 40mm and 20 x 10mm x 40mm ensuring you have the right size for your project. VERSATILE APPLICATION: Suitable for a variety of woodworking tasks from furniture making to cabinetry this kit is ideal for both professional and DIY enthusiasts.
Steel ground taper pin with external thread
Coiled Straight Pin - (Spiral Pin) - Spring Type,
Metric,
Steel - Standard (Self - Colour),
Heavy Duty - 420 - 560 - HV30,
DIN 7343.
Split Pin (Cotter Pin)
Metric
Copper
DIN 94
Single Spring Cotter Pin
Metric
Spring Steel - ZY (Zinc Yellow Passivated)
DIN 11024
Double Spring Cotter Pin
Metric
Spring Steel - ZY (Zinc Yellow Passivated)
DIN 11024
Omni - Standard Open Rivets
Blind Rivet Nut
Cylindrical
Open With Serrated Shank
A2 Stainless Steel
4 OCH 30
Blind Rivet Nut
Metric
A2 Stainless Steel
Blind Countersunk Rivet Nut Serrated Shank
Blind Rivet Nut
Metric
Steel - BZP (Bright Zinc Plated)
Blind Reduced Countersunk Rivet Nut With Open Serrated Shank
Round Head Rivets,
Metric,
A2 Stainless Steel.
Countersunk Head Rivets,
Metric,
Aluminium.
Countersunk Head Rivet,
Metric,
A2 Stainless Steel.
OMNI - Standard Open Rivets
OMNI - Standard Open Rivets
Domed Head (Mushroom Head) Expanding Blind Rivet - Expo
Metric
Aluminium
MULTI - Open Rivets With A Large Grip Range
MULTI - Open Rivets With A Large Grip Range
Bulb Domed Head Structural Blind Rivet
Metric
A2 Stainless Steel
Plus
Extractable dowel pins complete with inner thread and slight flats for air release.
Assortment box of 200 black anodised rivets with standard and large flanges.
Zinc plated carbon steel structural rivet with protruding head. Manufactured to DIN 7337.