Cost effective filters for protection against particulates.
Features and Benefits
• Low profile angle for minimum visual impairment
• Cartridges have an integral maintenance free disposable inhalation valve
• Easy to attach to the respirator with a secure fit when applied
Typical Applications
• Industrial use
High flow fuel filter with 10 micron fuel filter element. Ideal for filtering out unwanted contaminants from fuel including small particles of rust, scale, grit and dirt. Can be installed on both mobile and stationary fuel pump systems. Features 1"BSP inlet and outlet threads. Fitted with brass drain cock for releasing unwanted contaminants. Replacement filter elements are available, order Model No. TPF01.F.
10 Micron Diesel Particle Filter
Max Flow Rate (lpm) - 95
Pressure (bar) - 10
For gravity and pump systems
15 Micron Particle and Water Filter
Max Flow Rate (lpm) - 95
Pressure (bar) - 10
For gravity and pump systems
10 Micron Diesel Particle Filter
Max Flow Rate (lpm) - 60
Pressure (bar) - 10
For gravity and pump systems
Ramair sock style air filters, which feature one hole cut out of the foam on the underside of the air filter. The hole is designed so that you can pull the air filter over the top of the trumpets of the carburettor or the engine's air intakes – whichever is necessary. They are then secured with cable ties if needed which are included in this sale. They are constructed completely of foam which enables them to locate in the most difficult of areas and gives the most air flow. Supplied with cable ties for easy fitment.
Features:
High performance twin layer foam
Easy to clean using hot soapy water
100% hand made in the UK - guaranteed against manufacturing defects for life
Long lasting and hard wearing
Unit Quantity
No Of Inlets
Inlet Hole Spacing
External Height
External Width
External Length
Filtration Material
Internal Structure
3
Single
N/A
85mm
92mm
92mm
15mm
Performance induction kit for the Vauxhall Corsa D and E, for compatibility refer to the table below. This intake kit replaces the OEM air box. Features 100% Hand made in the UK – Guaranteed against manufacturing defects for life. Easy to clean using our filter maintenance kit - CK-003. T304 Stainless steel cage support structure.
What Does It Do? Ramair SR induction kits are designed to eliminate the major sources of air flow restriction that your vehicle experiences from the factory intake system. Ramair guarantees that by replacing your restrictive OEM intake system with an aftermarket Ramair component you will see an increase in power and throttle response. The filters are designed to achieve high, almost unrestricted air flow while maintaining filtration levels critical to ensure the longevity of your engine.
What Will I Get? Ramair Filters utilise the top-quality components in all their kits see below for what this kit will include: High performance twin layer foam filter. Cold air feed ducting. Full fitting kit with all clips/brackets/bolts required. Easy to follow step by step instructions.
If you have any queries on product fitment then please contact us via 01793 296 344 or on our live chat and one of our brand associates will be more than happy to assist.
Gas, Vapour and Particulate Filter 6099 protects against organic vapours (boiling point above 65°C, inorganic vapours, acid gases, ammonia and its derivatives, mercury, formaldehyde up to 10ppm and particulates. Suitable for use with 3M Reusable Full Face Respirators featuring the Bayonet filter connection system: 3M Reusable Full Face Mask 7097S, 3M Reusable Full Face Masks 6000 Series
Bayonet fitting gas filters to protect against dust, gas and vapour for use with series 7000 and 9000 masks.
Features and Benefits
• Bayonet connector that easily slots into place for fast use
• Direct connection can be made directly with the mask body or connected with the gas cartridges for multipurpose use
• Pre-filters and adaptors not required reducing overall costs
• Developed with pleated filter technology to drastically reduce breathing resistance, reduces fatigue and improves wearer comfort
Typical Applications
• Gas
• Dust
• Vapour
Notes
• Suitable for Series 7000 and 9000 Masks
• EN 143:2000+A1:2006
• EN 14387:2004+A1:2008
• A2 filter: Max use - 10 x WEL half mask, 20 x WEL full face mask or 5000 ppm whichever is lower
• A1B1E1K1 filter: Max use - 10 x WEL half mask, 20 x WEL full face mask or 1000 ppm whichever is lower
3M Adflo Gas Filter A1B1E1, 837242 is our ABE filter designed for use with 3M Adflo Powered Air Respirator.
High grade steel socket. Low profile design enables use on cartridge style filters.
A1 Organic gas and vapour filters with a boiling point > 65°C. Fits all Moldex 7000 series half face masks and 9000 series full face respirators.
Features and Benefits
• Filters organic gases and vapours 1000ppm
• Easylock bayonet connector
• Tested and certified to EN 14387:2004+A1:2008
3M Adflo Gas Filter A2, 837542 is our filter designed for use with 3M Adflo Powered Air Respirator.
10 Micron Particle and Water Filter
Paper Filter
Application - Gravity/Pump
Max Flow Rate (lpm) - 95
Pressure (bar) - 10
Inlet/Outlet - 1" F BSP
Filter Thread - 1 1/8"-12 M UNF
Diesel and Petrol
3M Secure Click Cartridge A2P3 R D8095 is CE approved against certain organic vapours with a boiling point greater than 65 °C, and particulates. Use our cartridge with 3M Secure Click Reusable Respirators 800 Series. New dual flow cartridges and filters allow for easier breathing.
Reduce your waste disposal costs* - crushing filters minimizes the volume of your hazardous waste. Air operated oil filter press with safety lock-out device which prevents the door being opened during operation. Floor mounting unit with outlet for waste oil transfer.
* For 'pay by volume' customers.
Used in conjunction with a press, this unit crushes filters up to Ø115mm and removes most of the oil and sludge, which drains into a suitable container (not included). Crushing filters minimizes the cost of disposal of hazardous waste by volume. Supplied with ram extension to allow 2-stage crushing of large filters without repositioning press table. Suitable for Ø38mm(1.5") press rams. Optional adaptors enable use with Ø50mm and Ø60mm rams.
For removing and refitting the fuel filter cap when replacing the fuel cartridge on 2.0D, 2.4D and 2.5TDi diesel engines found in VW and Volvo vehicles.
For removing and refitting fuel filter bowl when replacing the fuel cartridge.
Fits Ford Transit MK8 2.0TDCi 2016on. Manufactured from Chrome Vanadium steel. Cutout in the socket clears the fuel drain valve.
• Package includes:
• Model No. - Description
• OFC1 - Oil Filter Crushing Unit
• OFCA50 - Adaptor for Oil Filter Crusher Ø50 x 115mm
• OFCA60 - Adaptor for Oil Filter Crusher Ø60 x 115mm
• Model No. OFC1COMBO
• Package includes:
• Model No. - Description
• OFC1 - Oil Filter Crushing Unit
• OFCA50 - Adaptor for Oil Filter Crusher Ø50 x 115mm
• OFCA60 - Adaptor for Oil Filter Crusher Ø60 x 115mm
• You may also refer to the individual Model No. for full specification.
In-line filter for diesel and petrol with 10 microns - spin-on cartridge. Delivery max 60 l/min
Replacement cartridge for diesel filter mod. 6613
Cartridge filter for water extraction from diesel - filtering degree 10 micron - delivery max 110 l/min
Filter with flange for di water extraction form diesel - filtering degree 30 micron - delivery max 70 l/min
10 Micron Diesel Particle Filter
Paper Filter
Application - Gravity/Pump
Max Flow Rate (lpm) - 60
Pressure (bar) - 10
Inlet/Outlet - 1" F BSP
Filter Thread - 1 1/8"-12 M UNF
Diesel and Petrol
3/8" BSP Parallel Female, Fag Filter, Plastic Superior Metocene Bowl, Diesel Oil Filter, Series 20100-20150, 15 Micron, 228cm┬▓ Filter Surface Area, Metocene, Maximum Working Pressure 1 bar
125 Micron Diesel Particle Filter
Steel Mesh Filter
Application - Pump
Max Flow Rate (lpm) - 100
Pressure (bar) - 5
Inlet/Outlet - 1" F Flanged BSP
Filter Thread - 1" M BSP
Diesel and Raps Oil
SIMPLY CAR Stainless Steel and Stainless Mesh Air Filter - AFU06 AFU06
