Resistant to commonly used fuels, lubricants and coolants, is non-corrosive and free
from abrasive fillers.
100ml - Tube.
500ml - Tin.
STEAMSEAL is a high pressure setting pipe sealant made up of manganese and graphite which offers efficient sealing for ferrous and non ferrous pipework.
Features and Benefits
• Joints that have been sealed with Steamseal are easy to break and clean
• Wide temperature range from -20°C to +600°C
• Sets hard but is flexible enough to resist contraction of pipework, vibration and thermal expansion
• Resist pressures of up to 193 bar (2800 psi)
Typical Applications
• Steam, water and air joints
• Metallic threaded joints
Leading non-setting gasket and sealing compound in use world-wide. Non-hardening and non-setting allows for unlimited assembly time. Vibration-resistant. Allows metal to metal contact.
Features and Benefits
• Resistant to oils, lubricants and fuels
• Withstands rapid variations in temperature with ease
• Vibration resistant
• Flame, dust and moisture proofing properties
Notes
• Should not be used on: sheet metal parts; assemblies where soft thick gasketing material was specified; or as a gap filler
577 is a thread sealant that is designed for the locking and sealing of metal pipes and fittings, as well as other threaded assemblies. The sealant works by filling the space between threaded parts and seals whilst locking at the same time.
Features and Benefits
• Provides an instant, low-pressure seal for metal pipes and fittings
• Will not creep, shrink or shred and has excellent chemical and thermal resistance, offering less migration of liquid product after application
• Ensures high strength on contaminated surfaces and high performance on passive metals without an activator
Typical Applications
• For straight/straight and straight/taper threads and fittings
LOCTITE® 270 is a high-strength threadlocker that results in maximum efficacy when securing and sealing of bolts, nuts and studs.
Features and Benefits
• Prevents loosening due to vibration and serves to permanently lock assemblies which must not come loose
• Works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• Tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
Typical Applications
• Assembly
• Metal work
Easy break, smooth consistency, lead-free jointing compounds.
Type ‘A’
Thin consistency, for small joints which are new or undamaged.
Type ‘B’
Thick consistency, for use on uneven surfaces.
Highly durable Nitrile 'O' Ring Service Kits, available in Imperial and Metric sizings.
Features and Benefits
• Supplied in a durable storage box with sunken cavities for the simple location of the correct sized rings
Size range
• Inch kit: 1/8" - 2".
• Metric kit: 3mm - 50mm
Standards Met
• Inch 'O' Rings manufactured to BS1806
• Metric 'O' Rings manufactured to DIN7715
LOCTITE® 603 is a high strength retaining compound that has a high oil tolerance and is ideal for sintered bearings.
Features and Benefits
• High strength formulation means the retaining compound is ideal for use on close-fitting cylindrical parts
• This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration
Typical Applications
• Manufacturing
Approvals
• NSF
Highly resistant to steam and hot water and automotive fluids. Inhibits galvanic corrosion between dissimilar metals. Operating temperature range: -40 to 250°C.
Available in 40ml and 80ml tubes.
Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling. Loctite® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. <CRLF><CRLF>Features and Benefits <CRLF>• High strength formulation means the retaining compound is ideal for use on close-fitting cylindrical parts<CRLF>• This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration<CRLF><CRLF>Typical Applications<CRLF>• Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings<CRLF><CRLF>Notes<CRLF>• Colour: Yellow<CRLF>• Temperature range: -55 to 150°C
High quality integral tip packing extractors, strong yet flexible for maximum effectiveness.
Features and Benefits
• Hardened and tempered steel screws designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions
Notes
• Type 'TRACC' have an integral tip corkscrew tip
• Type 'TRACR' have replaceable tips for extended life
Designed for the permanent locking and sealing of threaded fasteners. Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include the locking and sealing of large bolts and studs (M25 and larger).
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant that is ideal for use on coarse metal threads
Features and Benefits
• Provides an instant low pressure seal that doesn't creep, shrink or block systems
• Cures in the absence of air and by contact with metals when confined within threads up to M80/R3"
• Thixotropic and high/very high viscosity and is single component, so clean and easy to apply
Approvals:
• UL approved
LOCTITE® 55 are thread sealing cords that are designed to seal off metal and plastic pipes and fittings.
Features and Benefits
•It needs no cure time and results in an immediate, full pressure seal
•The product is quick and easy to apply and allows for reliable readjustments
Typical Applications
•Thread sealing
•Gas fitting
•Food equipment
Notes
•The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61
Benefits:
• Rapid bond strength development.
• Easy to apply thixotropic paste.
• Conforms to BS6209
Areas for Use:
• Bonding PVC and ABS non pressure pipes to themselves and each other.
• PVC Soil and ventilating pipes, fittings and accessories conforming to BS4514.
• PVC rainwater piping/goods conforming to BS4576.
• PVC underground drainpipes and fittings conforming to BSBS4660.
• ABS and PVC waste pipes and fitting conforming to BS5255
• Bonding upvc window trim.
General purpose gaps up to 0,25mm. Temperature up to 150°C. Use on rigid metals parts.
Seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
Features and Benefits
• Rigid bond strength
• Temperature effective, from -55 to +150°C
Typical Uses
• For machined, rigid metal flanges - general purpose
A low strength adhesive for close fitting surfaces which will be frequently dismantled.
Features and Benefits
• Provides a good hold
• Low-strength means it can easily be reassembled after sealing
Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases. It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses. Specifications: Resin: DimethacrylateColour: GreenFixture Speed No Activator: 10 min.Fixture Speed With Activator: 5 min. Viscosity: 500 cpsGap fill: 0.25mmFlash Point: >100°CShelf Life: minimum 12 monthSpecific Gravity: 1.06.Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours.Cure Time with good % of final strength: 2 hoursTypical Breakaway Strength DIN : 40 Nm (25/55)Typical Prevailing Strength DIN : 55 Nm (45/70)Typical Breakaway ISO 10964: 26 Nm (16/36)Typical Prevailing ISO 10964: 36 Nm (22/50)
LOCTITE® 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration. It is a general purpose threadlocker that provides a medium strength bond. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses.
Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces).
Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
Permits disassembly with hand tools for servicing.
P1 NSF Reg. No.: 123000
Specifications: Brand LOCTITE MPN 1335884 Unit Of Measure 50 Milliliters
Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Specification Resin Dimethacrylate. Colour Yellow. Cure Speed with Activator & lt10 minutes. Cure Speed without Activator & lt15 mins @ 20C. Viscosity & gt50,000 cps. Gap Fill 0.05mm to 0.4mm. Flash Point & gt100C. Shelf Life 12 months @ 20C. Specific Gravity 1.09. Max. Operating Temperature +150C. Cured Performance Full Cure Time 6-12 hours. Typical Breakaway Strength & gt6 to & lt15 N/mm (2). Prevailing Torque & gt3 to & lt 9 N/mm (2). Static Shear Strength & gt5 to & lt15 N/mm (2). Size 50ml.
A medium strength, self curing, anaerobic adhesive for locking threads on most nuts, bolts and screws which may need to be disassembled. Examples include hydraulic system bolts, gearboxes, countersunk screws and most construction equipment. Gap filling to 0.25mm. Can be used on 'as received' and oil contaminated threads/nuts.
Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress. It is a cylindrical parts supplement, suited to structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit. Specifications Resin Urethane Acrylate. Colour Green. Fixture Speed No Activator 5 mins. Fixture Speed With Activator & lt5 mins. Viscosity 2500 cps. Gap fill 0.2mm. Flash Point & gt85C. Shelf Life 12 months min. Specific Gravity 1.08. Max Operating Temperature -55C to + 150C. Cured Performance Full Cure Time 24 hours. Static shear strength 30 N/mm. Bondloc High Strength Retaining Compound. Size 50ml.
A low strength, moisture-cured, thixotropic silicone-based paste. Typical applications include stamped sheet metal covers (timing covers and oil sumps). It exhibits a rapid skin-over time of 15 min and is suitable for gaps up to 1 mm. As a single component it requires no mixing.
Features and Benefits
• Good oil resistance
• Withstands joint movement
• Adheres to metal, plastic, glass and ceramic materials
• Reduces migration of liquid after application
Non-hardening and non-setting allows for unlimited assembly time.
Features and Benefits
• Vibration-resistant
• Allows metal to metal contact
• Light grade for thickness up to 0.015mm
• Medium grade for thickness up to 0.03mm
Standards Met
• To Rolls Royce specification MSRR 9055. Defence specification DTD 900/4586.
Plasti-Coll X10
Meets the requirements of the liquified petroleum industry and for the installation of appliances that use natural gas, propane or butane. Reddish brown in colour. Temperature resistant -40°C to +200°C. Conforms to BS695: Parts 5 & 6 Type 'A' : 1992.
Size: 600g.
LOCTITE 248 is a general purpose threadlocker with medium bond strength.
Features and Benefits
• Available in a convenient stick format
• This threadlocker secures and seals bolts, nuts and studs to prevent loosening due to vibration
• The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
LOCTITE 268 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose.
Features and Benefits
• It is available in a stick format and easy and effective in overhead applications
• The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• It tolerates slight contamination by industrial oils, corrosion prevention oils and cutting fluids
LOCTITE 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces. Steel fixture time of 10 min, brass 4 min and stainless steel 25 min. Tolerates slight contaminations of industrial oils. Suitable for all metal fasteners.
Features and Benefits
• Fluoresces under UV light
• Very high strength
• Tolerates industrial oils
Blue anti-tamper warranty seal. Fast drying. Excellent adhesion. Non-run.
Strength: not applicable.
Colour: blue.
Temperature: -55 to +145°C.
Comment: anti-tamper seal.
Flexible anaerobic gasket. High adhesion. Tolerant to oil contaminated surfaces.
Features and Benefits
• Highly adhesive
• Designed for use on rigid metal flanged connections
• Tolerant to oil and chemicals
Niotes
Strength: semi-rigid
Comment: for machined, rigid metal flanges - highly flexible.
These B641 medium-strength retainers are specially formulated retaining compounds designed to bond cylindrical fittings while allowing for their disassembly when needed, making them particularly valuable for applications that require regular maintenance or repair.
Features and Benefits
• Medium strength formula provides a secure hold yet allows for disassembly without excessive force, preserving component integrity
• Prevents the relative movement between interfacing parts, enhancing the efficiency of mechanical transmissions
• Fretting corrosion prevention protects against the wear and tear that can occur at the contact points of tight-fitting parts
• Environmental corrosion sealing shields metal surfaces from corrosive elements, prolonging their lifespan
• Consistency in load transmission ensures that mechanical forces are evenly distributed across the bonded area, maintaining the functional performance of the assembly
Rocol Gasseal is a non-setting, off-white sealing compound ideal for LPG, natural gas, air and water. Perfect for registered gas installers, it allows immediate pressure testing after assembly and resists vibration, making it a reliable choice for threaded pipe fittings in domestic and industrial gas systems.
Features and Benefits
• Immediate pressure testing after joint assembly
• Compatible with foam leak detectors
• Resists vibration for a secure seal
• Safe on aluminium, brass, copper, steel and zinc
• Suitable for LPG and natural gas systems
Standards
• Independently tested to BS EN 751-2 standards
Designed for cylindrical fitting parts. Cures once confined in the absence of air in close fitting joints.
LOCTITE® SI 5980 is a flange sealant designed especially for gasketing applications. It withstands in-line, low-pressure tests carried out after assembly of the flanges. Typical applications include stamped sheet metal covers (timing gear covers and oil sumps) where good oil resistance and the ability to withstand high joint movement is required. The product has leading health and safety features. Flange sealant for flexible flanges Good glycol resistance Excellent oil resistant Black colour Leading in health & safety features Specifications: Brand LOCTITE MPN 2327036 Unit Of Measure 100 Milliliters Weight (kg) 0.14
LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals and it can be used for the repair of damaged pre-cut gaskets. Extends gasket life Prevents leaks Slow drying Specifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assemblies Flexible setting Increases the reliability of gasket seals Specifications: Brand LOCTITE MPN 142274 Unit Of Measure 60 Milliliters Weight (kg) 0.06
Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222’s Anaerobic nature allows it to cure only when confined between metal parts. Applications include all small fasteners, where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners etc. Specifications: Resin: DimethacrylateColour: Purple White tintCure speed with Activator: <15 mins @ 20°CCure speed without Activator: 15 minutesViscosity- Brookfield Sp3 @ 20rpm: 1200 cps (thixo), Sp3 @ 20rpm: 5000cpsGap Fill/Max Threadform: 0.5mm/M36Flash Point: >100°CShelf Life: 12 months @ 20°CSpecific Gravity: 1.06 Cured performance: Full Cure Time: 12 hours @ 20°CTypical Strength: ISO 10964: 6Nm M10’sRange of Strength: Breakaway: 4Nm up to 12Nm, Prevailing: 2Nm up to 6 NmDIN 54454 Breakloose: 10Nm max 20NmDIN 54454 Prevailing: 6Nm up to 20Nm
These high strength studlocks ensure the integrity of mechanical assemblies by securely locking and sealing bolts, studs, and nuts. Ideal for environments prone to vibration, and corrosion, these adhesives are crucial for automotive, manufacturing, and engineering applications and offer a durable solution, enhancing components' safety and lifespan.<CRLF><CRLF>Features and Benefits<CRLF>• Single-component application makes the stud lock easy and clean to apply<CRLF>• Reduces the need for mechanical fittings decreasing operational costs<CRLF>• Chemical resistance allows the studlock to withstand harsh environments<CRLF>• Rapid cure speed facilitates faster assembly operations<CRLF>• Effective from -55°C to +180°C
These high-strength retainers are engineered to securely maintain cylindrical machine parts, ensuring durability and precision in the most demanding heavy-duty applications. Each of these anaerobic adhesives is perfect for boosting assembly reliability in bearings, gears, and other critical mechanical components. Their unique formulation is designed to bond permanently, filling gaps and resisting environmental and mechanical stresses to ensure long-lasting strength and performance.
Features and Benefits
• Rapid, permanent bonding sets quickly to prevent slippage
• Enhanced mechanical integrity minimises wear and backlash
• Corrosion resistant to shield against environmental damage
• Eco-friendly composition is safer for both users and the environment
These B542 medium-strength thread sealant offers a reliable solution for locking and sealing metal pipes and fittings, specifically designed to handle the challenges in hydraulic and pneumatic systems. The anaerobic formula ensures a fast cure and medium-strength bonding, making them ideal for fine threads that require durable sealing without compromising ease of disassembly.<CRLF><CRLF>Features and Benefits<CRLF>• Single-component sealant is easy to apply, ensuring a clean process without the need for mixing<CRLF>• Non-creeping, non-shrinking formula maintains the original fitting dimensions and does not block or disrupt the system operation<CRLF>• Specially formulated to withstand the rigours of vibration and shock, preventing loosening and leakage<CRLF>• Corrosion and galling protection safeguards threaded areas from environmental elements and wear, enhancing the longevity of the fittings
Loctite Threadlocker 5g Designed to seal all metal nuts, bolts and screws. Prevents loosening, leakage and corrosion.
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Medium strength, medium viscosity thixotropic threadlocking adhesive for metal thread sizes up to M36. LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE® 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools. Medium strength Medium viscosity Quick fixture time Thixotropic to reduce adhesive migration Specifications: Brand LOCTITE MPN 464295 Unit Of Measure 50 Milliliters Weight (kg) 0.08
The Loctite 5922 Flange Sealant is a highly reliable and versatile solution, characterized by its slow-drying formulation that transforms into a pliable, non-hardening film as solvents evaporate. Specifically designed to seal flanges, fittings, connections, and flexible assemblies, this sealant is adept at preventing leakage and significantly enhances the overall reliability of gasket seals. Its flexibility ensures a secure seal in a variety of applications, adapting to the dynamic conditions of joints and connections. The slow-drying feature allows for precise application, providing ample time for adjustments before setting. Trust Loctite 5922 Flange Sealant for effective and durable sealing, contributing to the longevity and performance of critical connections in a range of industrial and automotive settings.
Features and Benefits
• Low strength - ideal for parts which require disassembly
• Resistant to petrochemicals, lubricants, water, weak acids and alkalis
• Withstands temperatures of -55 to +200C
• Excellent for all metal to metal assemblies
• Colour: Black
• Temperature range: -55 to 200°C
• 60ml size
Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. It will secure all types and sizes of bearings, shafts and cylindrical parts which will require disassembly in the future. It is medium strength and is colour-coded yellow for job identification. Specifications: Resin: Mod. Dimethacrylate.Colour: Yellow. Fixture Speed No Activator: 10-15 mins.Fixture Speed With Activator: <5 mins. Viscosity: 400-800 cps.Gap fill: 0.2 mm. Flash Point: >100°C. Shelf Life: 12 month min.Specific Gravity: 1.06.Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours.Static shear strength: 12N/mm².ISO 10123 pin/collars range: 1-16 N/mm(²).
Everbuild EVBP16PIPE is a PVC pipe cement is a non-drip, thixotropic solvent based pipe cement and combines a long open time with a rapid rate of bond strength development. Conforms to BS26209. The Everbuild P16 product is designed specifically for the following applications. Bonding uPVC and ABS non-pressure pipes to themselves and each other, i.e. uPVC soil and ventilating pipes, fittings, and accessories conforming to BS4514 uPVC rainwater piping/goods conforming to BS4576 uPVC underground drainpipes and fittings BS4660 ABS or uPVC waste pipes and fittings conforming to BS55255. Size 250ml
J-B Weld Perma-Lock Blue Medium Strength Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools. J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. Great for: rocker arms, stud bolts, frame bolts, fasteners, bushings, loose screws and vibration sensitive items. OEM Approved, use by original equipment manufacturers to keep bolts and fastenings secure.
Specifications: Temperature Resistant: up to 148C (300F) .Suitable Bolt Size: 1/4in to 1in.Size: 6ml.
Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical parts. It allows larger machining tolerances. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.Approved for gas
LOCTITE® PC 5070 Pipe Repair Kit is an emergency repair sealant kit that uses fibreglass tape and an epoxy stick to provide a reliable and fast pipe repair system. It is a yellow, fibreglass tape designed for emergency sealing pipe of leaks. It is supplied as a set comprising epoxy-based LOCTITE® EA 3643 (a steel-filled kneadable stick) and GRP (glass reinforced plastic) tape. This provides an easy-to-use kit for the temporary repair of weak areas on metal, plastic, and composite pipes. Repairs can be achieved in minutes without special tools or training. Pipes quickly back in service, minimal downtime No special tools or training required Conforms to odd shapes Superior adhesion and pressure retention Specifications: Brand LOCTITE MPN 255861 Weight (kg) 0.296
Superfoil Pipe Insulation 108067
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
UPVC Metric Pipe System, PN16, Flange Gasket, to Suit 32mm Outside Diameter Tube, Working Temperature +20°C to +60°C, Maximum Working Pressure 16 bar, Comer
Threadlocking Adhesive - high strength. Permanent locking. No labelling. Suitable for all metal threaded assemblies. LOCTITE® 2700 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates. Slight contamination is tolerated. LOCTITE® 2700 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins. No hazard symbols, no risk phrases & no safety phrases High strength general threadlocker for maximum efficacy Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces) Can be disassembled by heating to 300°C WRAS Approval (BS 6920) : 1104508 Improved cure strength on zinc-flake coated steel Thread size = M20 Specifications: Brand LOCTITE MPN 1948763 Unit Of Measure 50 Milliliters Weight (kg) 0.05
Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing. LOCTITE® 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE® 542 reduces the migration of liquid product after application to the part.Ideal for fine threads as used in hydraulic, pneumatic & general fittingsInstant low-pressure seal Suitable for metal threads only Resistant to fuel, oil, coolants and hydraulic fluids Locks connection against vibration loosening DVGW approval (EN 751-1) : NG-5146AR0855 Specifications: Brand LOCTITE MPN 135483 Unit Of Measure 10 Milliliters Weight (kg) 0.015
LOCTITE 640 is a green, anaerobic, low viscosity, methacrylate ester-based retaining compound ideal for parts requiring a longer positioning time.
Features and Benefits
• Fixturing time on steel is 2 h
• Also used for active metals such as brass
• High strength product with good temperature resistance
• Max. diametrical clearance is 0.1 mm and service temperature is -55 to +175ºC
• Fluorescence allows product presence to be monitored
LOCTITE® 243 is a medium strength threadlocking adhesive that is ideal for oil tolerance, as well as all metals.
Features and Benefits
• Tolerates minor contamination by industrial oils and can be used to secure and seal bolts, nuts and studs
• Prevents loosening due to vibration that may occur on machinery, for example on pumps, gear boxes or presses
• The general purpose adhesive works on all metals, including passive substrates such as plated surfaces, aluminium and stainless steel
Typical Applications
• Ideal for parts that need subsequent dismantling
• Oil industry
• Metal industry
Approvals
• NSF food approved
Type VK4
Manufactured from KEVLAR Aramid fibres. VK4 is specially treated with a high concentration of resilient, food quality lubricants and heavy PTFE dispersion. VK4, KEVLAR Aramid fibre lube packing, is a durable, economic general service packing for 80% of plant needs. Non-staining lubrication and resilient performance make VK4 ideal for use in the paper industry.
Pressure rating: 150bar.
Rotary speed: 20m/s.
Temperature: -100°C +280°C.
pH range: 1 - 13.
Roll length: 8m.
Never use the product when maximum temperature and pressure are combined.
Used to identify British Standard Imperial (BS1806) 'O' Rings, this very simple to use gauge is invaluable in the workplace.
Health and safety friendly fast fixing high strength thread locker. Suitable for sealing and securing nuts, bolts and studs to prevent loosening due to vibration.
Features and Benefits
• High strength thread lock formula for maximum effectiveness in the sealing and securing nuts, bolts, and studs to prevent loosening due to vibration
• Permanent locks assemblies that prevent loosing on assemblies must not come loose
• Works on all metal types, including passive substrates. Slight contamination is tolerated.
• Health and safety friendly has no hazard symbol, no risk phrases or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive
• Fast acting 5 minutes fast Fixture time to increase productivity
Typical Applications
• Metals
• Passive substrates
Notes
• Disassembled by heating to 300°C
• Max thread size: up to m20
• Temperature range: -55 to +150°C
• Approvals: P1 NSF Reg. No: 123006
• WRAS Approval (BS 6920): 1104508
Cablecraft GEL INSULATING RE-ENTERABLE CLEAR 300ML Gelseal Insulating Gel GEL-SEAL
Medium strength, For fine threaded fittings (up to 3/4 BSP). Used in hydraulic and pneumatic installations. Drinking water WRAS approved.
Features:
• Instant low-pressure seal
• Resistant to fuel, oil, coolants and hydraulic fluids
• Locks connection against vibration loosening
Maximum pipe size: 3/4".
Comment: for small fine threaded metal fittings, especially hydraulic fittings.
LOCTITE® 648 is a high strength retaining compound that has high temperature resistance and is ideal for the retention of parts with a clearance or interference fit.
Features and Benefits
• High strength formulation means the retaining compound is ideal for use on cylindrical fitting parts
• This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration
• Exhibits a robust curing performance and also works on passive substrates
• Offers high-temperature performance and good oil tolerance
Typical Applications
• Manufacturing
LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws.
Features and Benefits
• Can be easily applied to small fasteners and will lock and seal out moisture, but can also be gently removed with the same hand tool use to assemble the fasteners
• Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass
• The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• Tolerant of minor contamination from industrial oils including engine oils, corrosion prevention oils and cutting fluids
Typical Applications
• Oil industry
Boss White & Boss Green
The original compound for screwed joints. For compressed air, water, acetylene and saturated or super-heated steam. For potable water pipes use Boss Green.
Size: 400g.
LOCTITE® SI 5980 is a class-leading flange sealant designed especially for gasketing applications. It withstands in-line, low-pressure tests carried out after assembly of the flanges. Typical applications include stamped sheet metal covers (timing gear covers and oil sumps) where good oil resistance and the ability to withstand high joint movement is required. The product has leading health and safety features.
Features and Benefits
• Flange Sealant - excellent adhesive strength. Ideal for applications involving large gaps. Label-free. Excellent resistance against oil
• Flange sealant for flexible flanges
• Good glycol resistance
• Excellent oil resistant
• Leading in health & safety features
Designed for the locking and sealing of threaded fasteners. Eliminates the need to disassemble prior to application. Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Fill porosity in welds, castings and powdered metal parts.
Features and Benefits
• High strength, low viscosity
• Wicks into threads
• Can be applied after assembly
Use in place of conventional gaskets. Very flexibile. Good gap fill and water glycol resistance. No hazard symbols, no risk phrases. White Material Safety Data Sheet - no need for COSHH assessment.
Features and Benefits
• Highly flexible
• Excellent gap filling properties
• Water glycol resistant
Notes
• Strength: flexible
• Colour: grey
• Temperature: -55 to +200°C
• Comment: flange sealant, water- and glycol-resistant, no safety labelling
A high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal.
Features and Benefits
• Increases the torque capacity of assembled flanges
• Use on rigid metal flanges
• High temperature resistance, up to 200°C
• NSF food approved.
• Firm strength
High strength, low viscosity, green, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring. LOCTITE 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces. <CRLF><CRLF>Features and Benefits <CRLF>• Steel fixture time of 10 min, brass 4 min and stainless steel 25 min <CRLF>• Tolerates slight contaminations of industrial oils <CRLF>• Suitable for all metal fasteners<CRLF>• Fluoresces under UV light
A highly versatile and portable kit packed in a strong plastic case, containing all the necessary items for simple and fast on-the-spot production of any size static O-ring - required in sealing applications for maintenance or prototype use.
If further instant adhesive is required, we recommend the use of Loctite 406 Rapid cure adhesive for rubber.
Features and Benefits
• Each kit is supplied in a fitted and highly durable blow moulded case
• O-ring is ready for light mechanical duties after just 30 seconds
Contents
• Includes a cutting and gluing jig, retractable snap-off safety knife, 3m/10ft tape measure, one bottle of instant adhesive and all popular metric and inch sizes from 1.78 - 8mm in 2m lengths.
Notes
• Nitrile Rubber (NBR)
For most applications
Operating range -30°C to +120°C
• Viton Rubber
For high temperature applications and where greater tolerance to fuel oils is required
Operating range -20°C to +200°C
LOCTITE 55 Pipe Sealing Cord provides a reliable and quick solution for sealing metal and plastic pipes and fittings. It delivers an immediate, full-pressure seal without requiring curing time, making it perfect for efficient installations. Certified for both gas and potable water, it meets strict safety standards for peace of mind.
Features and Benefits
• Non-curing, immediate full-pressure seal
• General purpose pipe and fitting sealant
• WRAS listed for potable water
• 160m dispenser for extended use
• Polyamide material for durability
Standards
• DVGW/KTW approved for gas and water
• Certified to NSF/ANSI, Standard 61
• EN 751-2 Class ARp and DIN 30660
General purpose. No hazard symbols, no risk phrases. White Material Safety Data Sheet - no need for COSHH assessment.
Features and Benefits
• Drinking water WRAS approved
• Oil and vibration resistant
Notes
• Maximum pipe size: 3in.
• Comment: No labelling, white MSDS.
High strength stud locking adhesive for all types of metal. Rapid fixing time of 15-20 minutes on normal plated, oiled metal surfaces and fixtures. Works on steel, aluminium, stainless steel and zinc.
Multi purpose flexible silicone sealant.
Features and Benefits
• Can be used on metal, plastic and painted parts
• Resists vibration, thermal expansion and contraction
Use in place of conventional gaskets. Very flexibile. Good gap fill and temperature resistance up to 300°C. No hazard symbols, no risk phrases.
Features and Benefits
• Highly flexible
• Excellent gap filling properties
• Temperature resistant
Notes
• Strength: flexible
• Colour: copper
• Temperature: -55 to +300°C
• Comment: flange sealant, high temperature resistant, no safety labelling
545 Hydraulic, Pneumatic Sealant Thread Sealant is a pipe sealant designed for the locking and sealing of metal pipes and fittings. This product is specially formulated to offer high lubricity for easy assembly and removal.
Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general. It contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens. Suitable for fittings up to 2 in. (50 mm) in diameter including pneumatic and hydraulic fittings. Excellent solvent resistance. ABSSM Approved. CFIA Approved.
Applications: For Metal Parts
Agency Approvals / Specifications: ABS, CFIA Listed
Cure Type: Anaerobic Cure
Filler: Unfilled, Solvent Resistant, Temperature: High Temperature
Number of Components: 1 Part
Physical Form: Liquid
Pressure Resistance (psi): 10000
Substrates: Metal
Technology: Thermoset
Temperature Range (°C): -54 to 149
Temperature Range (°F): -65 to 300
Viscosity (Brookfield mPa.s (cP)): 14000
Viscosity Temperature (°C): 25
Viscosity Temperature (°F): 77
Medium strength. No hazard symbols, risk phrases. No need for COSHH assessment. Drinking water WRAS approved.
Features and Benefits
• Formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration
• It works on all metals and passive substrates
• Slight contamination by industrial oils, corrosion prevention oils and cutting fluids is tolerated
• Its key differentiator is the "White" Material Safety Data Sheet
• Does not contain any declarable carcinogens, mutagens or reproductive toxins
Bondloc B243 is an Anaerobic formulation designed to be used on parts in an as received condition, such as those with protective films (oils) etc. Oil tolerant B243 is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance. Specifications: Resin: Mod MethacrylateColour: Blue ThixotropicCure speed: <15 mins @ 20°CViscosity: 1200-1800 thixotropicGap fill: 0.1mmFlash Point: >85°CShelf life: 12 months @ 20°CSpecific gravity: 1.04Max. Operating Temperature: -53°C to + 150°C Cured Performance: Full Cure Time: 24 hoursTypical Breakaway Strength: 12 N/mm²Typical Prevailing Strength: 8-10N/mm²
Retains bearings, even under high rotational loading. Keeps full strength with no fatigue under load stress and has low corrosiveness.
Low strength stick. Semi-solid formula, ideal to pre-apply. NSF food approved.
Thread type: coarse.
Maximum pipe size: 3".
Temperature: -55 to +150°C.
Comment: thread sealant stick, for metal threads, ideal for maintenance applications.
Quad rings - provide lower friction and eliminate the tendency of standard ?O?-rings to ?roll? in the groove. Can also be used on slow rotational applications.
Kit contains a selection of the most popular 30 sizes of Quad rings (X-Rings).
Ideal for repair or maintenance use.
Viton material.
LOCTITE 276 is a green, low viscosity, methacrylate-based threadlocking adhesive with very high strength. It has a fixture time on steel of 3 min, brass 3 min and stainless steel 5 min.
Features and Benefits
• Can tolerate slight contaminations of industrial oils
• Suited to nickel surfaces
• Fluoresces to allow monitoring
Grey High Performance RTV Silicone Gasket Maker is a one part RTV silicone that remains flexible and withstands high vibration.
Features and Benefits
• Designed for high-torque applications
• Withstands temperatures from -75°F to 625°F (-59°C to 329°C) intermittent
• Outstanding oil and shop fluid resistance
• Non-corrosive, low odor
Hylomar M (previously known as Racing Formula) is an acetone based version of Hylomar Universal Blue. The only noticeable physical difference between the Hylomar M and the original Hylomar Universal Blue is the acetone version exhibits increased adhesive properties when compared to the standard Hylomar Universal Blue. Thus, making it an ideal product for high performance applications. Therefore, it is used by Formula One and NASCAR® race teams. Typical applications include coating of pre-formed gaskets, water and oil pumps, cylinder heads and sumps, inlet manifolds, timing case covers, gear box and transmission components, thread sealing or for use on finely machined surfaces.
A low strength thread lock for all types of metal threaded fasteners. Prevents fasteners loosening due to vibration and seals against leakage, whilst still allowing easy disassembly of treated parts. Fills gaps up to 0.5mm.
Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Specifications: Resin: Dimethacrylate.Colour: Brown.Fixture Speed No Activator: 10 - 20 mins. Fixture Speed With Activator: <5 mins. Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.Spindle 2 @ 20rpm: 400 to 800 cps.Gap fill: 0.05mm to 0.25 mm.Flash point: >100°C.Shelf life: 2 Years @ 20°C.Specific gravity: 1.06.Max operating temp: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours.Typical breakway ISO 10964: 15 N.m.Typical prevailing ISO 10964: >8 N.m.DIN 10964 Breakloose: 24 N.m.DIN 10964 Prevailing: 15 to 35 N.m.Typical Break and Prevailing: 20N.m/15N.m.
Precision made hand tool for efficient on-site cutting of circular gaskets from compressed fibre jointings, rubber and cork-elastomer sheet.
Features:
• Readily adjustable for diameters from 20mm (13/16") to 600mm (24").
• Long extension bar available for diameters up to 900mm (35").
• Dual metric/inch calibration.
• Cuts compressed fibre jointings up to 5mm thickness; cork-elastomer to 12mm.
Boxed kit containing main body, extension bar, ten blades, and operating instructions.
Cutting board, long extension bar, and straight edges are available as optional extras.
Rust-Oleum® LeakSeal® is an easy to use, rubberised protective utility coating designed to fill and seal leaks and cracks.
Features and Benefits
• Provides a water-tight, flexible seal that prevents moisture penetration and corrosion
• Dries to a semi smooth finish - will not sag or drip
• Can be top-coated with latex or oil-based paints
Typical Applications
• Designed to fill and seal leaks and cracks on metal, aluminium, galvanised metal, PVC, concrete, masonry, asphalt/bituminous roofing materials, vinyl siding, fibreglass, and more
Notes
• Colours: transparent, aluminium, black and white
• Size: 500ml
For all coarse metal threads, especially for nuclear power plants. Fast cure suitable for applications at low temperature.
Thread type: coarse.
Maximum pipe size: 3".
Temperature: -55 to +150°C.
Comment: for metal coarse threads, especially for nuclear power plants.
Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Inter-braid, lattice construction improves sealing with less gland pressure. For use against oils, water, steam, solvents and general chemicals.
Pressure rating: 80bar.
Rotary speed: 10m/s.
Temperature: -50°C + 250°C.
pH range: 4 - 12.
Roll length: 8m.
Gland Packing
We offer an extensive range of square section Gland Packing designed to minimise maintenance costs using the most advance materials. Available in other sizes and materials, please contact your local service centre for more details.
How to determine the correct Gland Packing size
• Measure diameter of shaft.
• Measure inside diameter of gland (or stuffing box).
• Gland ID - Shaft Diameter divide by 2
This figure gives you the cross section of the area to be packed.
• From the table, choose the gland packing with the closest size.
If your figure is in-between, use the next size up.
mm inch
3.2 1/8"
5.0 3/16"
6.5 1/4"
8.0 5/16"
9.5 3/8"
10.0 3/8"
11.0 7/16"
12.5 1/2"
14.5 9/16"
16.0 5/8"
19.0 3/4"
20.0 3/4"
22.0 7/8"
25.0 1"
Loctite® 275 is a green, high strength, high viscosity, thixotropic methacrylate-based threadlocking adhesive. With fixture times on steel of 15 min, brass 7 min and stainless steel 180 min, it is ideal for applications where migration of the adhesive must be prevented.
Features and Benefits
• Can tolerate contamination of industrial oils
• Fluoresces to allow monitoring
Typical Applications
• Suitable for large threads
Notes
• Available in 50ml and 250ml sizes
Loctite® 245 is a class-leading medium strength, medium viscosity methacrylate threadlocking adhesive that's perfectly formulated for large threads - up to M80 in size. It's perfect for fasteners that require normal disassembly with standard hand tools (breakaway torque is 13 Nm) and is suitable for metals that include steel, brass and stainless steel.
Features and Benefits
• Medium strength, medium viscosity threadlocking adhesive for large threads
• Intended for fasteners that require normal disassembly with standard hand tools
• Suitable for metals that include steel, brass and stainless steel
High strength paste. Fills gap up to 0.5 mm (use with Activator 7649). Allows re-use of worn parts. NSF food approved.
Strength: high.
Colour: silver.
Temperature: -55 to +150°C.
Comment: gap fill to repair.
B542 Hydraulic Seal is a thixotropic liquid which cures Anaerobically to form an incredibly durable, high pressure seal on all types of threaded couplings - used on low, medium and high pressure lines.
Features and Benefits
• High quality hydraulic sealant
• Ultra-tough seal
• Effective on all types of threaded couplings
These B620 and B648 retainers are high-strength anaerobic compounds designed for securing cylindrical components, offering enhanced performance under high temperatures and dynamic conditions. B620 is specifically formulated to withstand temperatures up to 200°C, making it ideal for automotive, aerospace, and industrial equipment like engines and turbines. B648 is suited for bonding gears, rotors, and shafts in similar environments, where reliable performance under shock and vibration is critical.<CRLF><CRLF>Features and Benefits<CRLF>• High-temperature resistance, ideal for environments exposed to high heat<CRLF>• Enhance the reliability of mechanical assemblies by ensuring secure fits even under harsh conditions<CRLF>• Eliminates backlash in keys and splines preventing mechanical play and wear in critical component interfaces<CRLF>• Strengthens heavy press fits enhancing the fit and load capacity of assembled parts<CRLF>• Fretting corrosion prevention protects the metal surfaces from the microscopic wear and oxidation that occurs in tight fits<CRLF>• Environmental corrosion sealing offers a barrier against damaging environmental elements<CRLF>• Designed to minimise the risk of damage from uneven stress distribution during operation<CRLF>• Formulated to maintain uniform force distribution, critical for mechanical efficiency and longevity