Multi-purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a powerful anti-fungicide to prevent mould growth. Sealing around worktops, laminates baths, showers, basins and other sanitary ware, etc.
Features and Benefits
• Very fast cure
• Permanently flexible yet incredibly high strength bond
• Waterproof seal
Notes
• Cartridge size: C3 280ml.
A grease-like silicone material, thickened with heat conductive metal oxides.
Features and Benefits
• High thermal conductivity with low bleed
• No drying, hardening or melting
• Stable at high temperatures
• Suitable for the base and mounting studs of transistors, diodes and effective many heat sink devices
Notes
• Dispensing Method: Tube
• Conductivity: 0.67W/m.k
A general multi-purpose adhesive/sealant that is a one-component silicone rubber. Simply apply to the prepared surfaces, then quickly cover with the other item to be bonded. Ideal for sealing joints, wire entries and connectors, waterproofing pumps and glass to metal bonds. FDA approved.
Features and Benefits
• Adheres to a variety of surfaces
• Excellent resistance to weathering, moisture and temperature
• Cures at room temperature to a tough, flexible rubber
• Stable and flexible from -60°C to 180°C
One Strike® is a lightweight filler ideal for use on walls or ceilings thanks to its non-sag properties.
Features and Benefits
• Quick drying in just 30 mins
• Resistant to shrinking and cracking
• Delivers a smooth finish with no sanding required, ready to paint or paper
• Deep fill to 75mm in one application
Typical Applications
• Suitable for repairs to plaster, wood, brick, stone or rendering
• Interior or exterior walls or ceilings
Notes
• Available in 1ltr and 5ltr
External frame sealant is an acrylic based sealant which provides a long lasting, permanently flexible seal. This sealant is high quality, adheres to most surfaces and can be over-painted when cured.
Features and Benefits
• Mould resistant for long term use
• Easy clean up
• High quality, versatile sealant
Typical Applications
• Timber
• Aluminium door frames and windows
The ultimate combined building adhesive and sealant.
Features and Benefits
• Based on hybrid polymer technology, with the power to both bond and seal virtually anything in virtually all conditions, even under water or in the rain
• Offers almost limitless benefits as an adhesive and a sealant removing the previous application barriers associated with conventional products
Mildew Resistant Silicone Sealant for Refrigeration Units
A one-part, acetoxy, silicone rubber sealant which has excellent adhesion to a variety of surfaces.Contains a food grade fungicide. Ideal for sealing refrigeration units and areas where food contact is likely. (Meets US Food and Drugs Administration Regulation Number 21CFR177.2600)
Features and Benefits
• Conforms to BS5889 Type B
• Fast cure
• High modulus-acetoxy cure type
• Silicone & Acrylic Sealants - Dow Corning
Typical Application
• Refrigeration Units
Notes
• Minimum Operating Temperature: -50°C
• Maximum Operating Temperature: +150°C
• Chemical Type: Acetoxy
• Physical Properties: High Modulus
• Cure Time: 24 (2.5 mm) h
• Product Form: Paste
• Operating Temperature Range: -50 to +150 °C
Loctite 5940 is a 1-part, room temperature vulcanizing acetoxy silicone sealant ideal for sealing and bonding. It adheres to metal, glass, ceramics, and plastics, forming a tough, waterproof, and oil-resistant bond. With temperature resistance from -50°C to +200°C, it's perfect for demanding environments. Solvent-free and crack-resistant.
Features and Benefits
• Solvent-free for safer use
• Outstanding resistance to ageing, shrinkage, cracking, and discolouring
• Cures with moisture exposure, forming a tough, flexible, waterproof, oil-resistant silicone rubber bond
• Ideal for applications with an operating range of -50°C to +200°C, and short-term exposure up to +220°C
Ronseal High Performance Wood Filler is a chemically bonded filler and catalyst that provides extremely tough repairs to virtually any wood damage without shrinking or cracking. Fills to any depth and can be drilled, screwed or planed. Ideal for use in interior or exterior wood repairs more than 5mm deep. Typical areas include window frames, sills, doors and door frames. For minor and surface wood repairs use Ronseal Multi Purpose Wood Filler. Available in: Natural, Dark or White. Application: Filling Knife.Drying Time: approx 30 mins.Protection Level: Very High.
A premium quality bitumen based sealant and adhesive which provides instant, permanent weather-proofing to a wide variety of roofing applications. Adheres to most common roofing materials such as bitumen, asphalt, felt, metals and wood.
Pack size: C3 (310ml).
High strength automotive glazing adhesive.
Features and Benefits
• Excellent direct glazing performance on vehicles, boats and buses
• Highly flexible and soft upon cure to cushion glass from vibrations and impact shocks
• Non-corrosive and paintable
Typical Applications
• OEM
• Repair markets
J-B Weld Hi-Temp Silicone Gasket Maker Sealant Red, 85g, is a RTV (Room Temperature Vulcanized) Silicone gasketing material. Designed for use in mechanical assemblies where the existence of higher, continuous temperatures up to 287C (550F) or 343C (650F) intermittent might exist. Upon curing, which occurs when the product is exposed to the moisture in the air, the silicone forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering, is sensor safe and is great for many automotive applications.
This one-component rubber sealant is designed for both exterior and interior applications. This permanently plastic sealant ensures a durable and weatherproof seal in a variety of conditions. Forming a robust layer within 24 hours of application, it remains permanently plastic beneath the surface, accommodating joint movements of +/- 5%. The versatility of this sealant extends to its paintability, allowing seamless integration into your desired aesthetic. With excellent UV and chemical resistances, this sealant stands the test of time in diverse environments. Invest in Everbuild Rubber Sealant for a dependable solution that combines durability, flexibility, and weather resistance for your sealing needs.
Features and Benefits
• Can be painted over
• Highly versatile and can adhere to most building surfaces
• Forms a surface skin but retains a permanent plastic coating underneath
• External weathering properties for a long lifespan
Typical Applications
• Roofing
• Glazing
• Metal containers
• Metal roof panels
Highly flexible rubber sealant/ adhesive. Good gap fill. Recommended for bonding, sealing and protecting components subjected to vibration. Suitable for glass, metal, ceramics, composites, and most plastics.
Strength: 2.5N/mm².
Sealant type:silicone.
Colours: clear, white and black.
Temperature: -40 to +250°C.
Comment: general purpose.
The original 2 part polyester wood filler. Used and trusted by millions of professionals around the globe.
Features and Benefits
• Durable, long lasting and shatterproof
• Can be drilled, screwed, sanded or planed
• Can be easily painted on once cured
• Flexes with the natural movement of the wood
Typical Applications
• Interior and exterior use
The Polycell Trade Decorators Caulk is a simple to use acrylic sealant ideal for internal or external use around skirting, stairs, windows and doors where movement occurs. It gives a smooth finish that does not require sanding. Polycell Trade Decorator's Caulk 380ml
High performance, neutral cure silicone adhesive/sealant.
Elongation = 680 %
Shelf Life = 360 Days
Tack-Free Time-50% RH = 28 Minutes
MOLYKOTE® 4 Electrical Insulating Compounds are a smooth, silicone, grease-like material which maintains relatively constant consistency over operating temperature range. It has excellent dielectric properties and is also highly water repellent. It can be used as a filling or a coating to exclude moisture or prevent electronic leakage under damp conditions in electronic equipment. Also very handy to use as a lubricant when working with wiring.
Supplied in a 100g or 5kg tube.
Features and Benefits
• Maintains relatively constant consistency over operating temperature range
• Excellent dielectric properties, highly water repellent
• Very handy for use as a lubricant when working with wiring
Notes
• Lubricant Type: Grease
• Dispensing Method: Tube
• Weight: 100g; 5kg
• Operating Temperature Min: -50 °C
• Operating Temperature Max: 200 °C
• Colour: Transparent White
• Lubricant Applications: Automotive, Electrical, Mechanical
• Dielectric Strength: 16 kV/mm
Polyfilla® Quick Drying Filler offers all the qualities of Polyfilla® but in a quick drying format.
Features and Benefits
• Quick drying, ready to paint in 5 minutes
• Can be used straight from the container for last minute, small interior repair jobs
• Easy to sand
• Formulated to not crack or shrink
Typical Applications
• Indoor use
• Plaster
• Wood
• Masonry
• Stone
Fast drying flexible decorators filler and sealant that remains permanently flexible. Can be overpainted with most paint types or covered over with wallpaper, no sanding down required.
Features and Benefits
• Fast drying - can be overpainted in 1 hour
• Permanently flexible
• Easy water clean up
• Excellent slump resistance
The Original and best, Brummer Wood Filler is ideal for repairing furniture, doors, skirting boards and wooden floors, as well as picture frames and mouldings. Highly versatile, it can be used outside if varnished or painted over and mixed with other Brummer wood filler colours. It can be drilled and sanded just like wood itself, or stained with a proprietary stain to achieve any desired shade. Heat proof (up to 90°C), works equally well on most metals and can be used under nearly all types of decorative finish including polish, lacquer, varnish and paint. Available in small (250g) and medium (700g) sizes, in a range of popular wood shades to complement the finishes used to enhance the beauty of natural wood.
Dowsil™ 786 is a one-part mildew resistant silicone, which contains a food-grade fungicide and offers excellent adhesion to a variety of non-porous surfaces, including ceramics and aluminium. Used for sealing in refrigeration units in domestic and commercial kitchens and other areas of common food contact. Meets US food and drugs administration regulation Number 21CFR177.2600. It is a high modulus - acetoxy cure type and is safe for repeated food contact. Application temperature range +5 to +40°C
500 Bath & Sanitary Silicone is a premium quality high modulus acetoxy cure silicone sealant that contains a high level of powerful anti-fungal compound to prevent mould and fungal growth.
Features and Benefits
• Fungicidal formula - doesn't discolour on aging, even in damp conditions
• Quick curing - picks up less dirt and grime
• Waterproof seal
• Permanently flexible yet strong
Typical Applications
• Often used in areas of high humidity, such as bathrooms, toilets, showers and kitchens
Standards Met
• Tested to ISO 8339 and ISO 10590/10563
The 3145 90ML from Dow Corning is a RTV clear adhesive/sealant for electrical and electronic applications.
Features and Benefits
• Non flowing
• Room temperature cure
• High tensile/tear strength and elongation
• MIL-A-46146 group II
• No mixing required
• Adhesive colour is transparent
• Tube dispenser
• 626% elongation
• 90ml volume
• Operating temperature range of -45°C to 200°C
Applications: Industrial
Dispensing Method Tube
Adhesive Colour Transparent
Volume 90ml
Elongation 675 %
Operating Temperature Min -55 °C
Cure Time 72 h
Operating Temperature Max 200 °C
Colour Transparent
SVHC No SVHC (17-Dec-2015)
Tear Strength 33000 N-m
Dielectric Strength 21 kV/mm
Everflex Premium 175 Universal Acrylic Sealant is ideal for internal and external sealing. Adhering to virtually all substrates, it works especially well when sealing around timber and metal window and door frames.
Alternatively it can be used for internal sealing around PVCu window, door frames, baths and basins, sealing cracks and gaps in brickwork, stone and concrete, and as an adhesive for bonding polystyrene coving and tiles.
The high-quality acrylic sealant that provides a long lasting, permanently flexible seal in a wide variety of applications.
Features and Benefits
• Permanently flexible for a long-lasting finish
• Adheres to most surfaces making it ideal for both internal and external jobs
• Mould resistant formula helps protect against bacterial growth
• Over paintable
• Easy clean up
• CE Marked
• Available in white and brown formulas
Typical Applications
• Domestic
• Commercial
• On site
Notes
• Everflex Premium 175 Universal Acrylic Sealant should be at room temperature when in use.
• If stored in cool conditions it should be placed in a warm room / bucket of warm water before use to gently heat up to working temperature.
• Do not apply at temperatures below +4°C.
• Application Temp. Range +4°C to +40°C
Non-slumping sealant designed for sealing and bonding applications exposed to temperatures as high as 315°C (600°F).
Features and Benefits
• Extreme temperature resistance
• Soft yet strong bond
• Creates a perfect seal
Typical Applications
• The high temperature properties of this sealant make it ideally suited for:
• Sealing and encapsulating heating elements in appliances, aerospace gasketing, industrial ovens and other critical bonding, sealing, potting, encapsulating and protective coatings where parts must perform at high temperatures
Weather Mate® Sealants are resistant to all weather conditions which makes them perfect for sealing around down pipes, flashing, guttering and corrugated roofing.
Features and Benefits
• Sticks to wet surfaces and can be applied in wet weather
• When cured, these sealants can be over-painted with most wood stains
• Remains permanently flexible
• Adheres to most surfaces
Typical Applications
• External use
• Rooflines
• Lead
• Bitumen
• Galvanised steel
• Pointing windows and door frames
Notes
• Can be used in conjunction with Bitumen Asphalt Tarmac, a multi-use sealant and adhesive that can be applied in wet weather
Sikaflex® 212 FC™ is a sealant designed for jointing substrates associated with vehicle construction. The paste-like consistency cures at room temperature and is intended for internal jointing only.
Features and Benefits
• Suitable for sanding once cured for a professional look
• Low odour formula for user convenience
• Can be painted once cured for a neat finish
• Versatile formula bonds to a wide variety of materials
• Elastic composition that can be sanded
Typical Applications
• Industrial
• Commercial vehicle building
• Metals
• Plastics
• Glass
• Wood
TOUPRET Ready To Use Joint & Skim is suitable for surface finishing, filling and plasterboard jointing. Easy to sand, with no depth limit. Suitable for interior use, manual applications. Conforms to BS EN 13963 for jointing applications. For use on new or renovated substrates, either unpainted or painted gypsum plaster, plasterboard, cement, concrete, cellular concrete, breeze blocks, bricks and stone. It can be overcoated with any filler, any conventional paints and wall coverings.
Red Devil Onetime® Filler is a specially formulated, premium, lightweight filler which comes ready mixed. It spreads easily, is paintable within minutes and won't shrink or crack. No sanding is required. The filler is suitable for interior and exterior use and cleans up easily with water.
Tetrion All Purpose Filler is the same tried and trusted formulation which has been the 'go to' for trade decorators and DIY enthusiasts for years. The ideal choice for projects where a versatile, multi-surface filler is required. It's also vibration and shrink resistant. Specially designed to give a super smooth finish for both indoor and outdoor applications. Can be drilled and tapped. Suitable for use on wood, plaster, stone, concrete and brickwork.
Silicone 700T is a fast, neutral cure, low modulus sealant specially formulated for the PVCu and roofline industry. For perimeter pointing window and door frames, sealing plastic roofline areas and general weathersealing. Now contains a powerful anti-fungal compound.
Modified silane flexible adhesive. Bond without primer. Over-paintable. Fire resistance.
Strength: 3.5N/mm².
Sealant type: modified silane.
Colours: black and grey.
Temperature: -40 to +100°C.
Comment: flame-retardant approvals (railway).
BDFIXG750
Expanding foam that is based on a moisture curing polyurethane prepolymer. Quick, economic and easy to apply. Improves draught and heat insulation, fills irregular gaps, fixes framework and deadens sound. Can be cut, sawn, plastered and sealed over once cured. Available in 750ml gun grade canister which can be used with a standard gun foam applicator.
Conforms to DIN4102 Class B3 (Foam rating for products with no fire resistant additives or properties).
Size: 750ml.
100HMA Bond-Flex Single part, high modulus Silicone Sealants. This acetoxy type silicone rubber sealant cures on exposure to atmospheric moisture to form a resilient, highly elastic seal.
Features and Benefits
• Elasticity maintains it's flexibility over a wide variety of temperatures
• High resistance to weathering
• Low shrinkage
Typical Applications
• Glazing
• When adhesion is required to non-porous surfaces
Standards
• Conforms to BS EN 15651
The Everbuild range of fire sealants are five hour rated, one part, emulsion acrylic based, intumescent acoustic sealants that gives a firm yet flexible seal to joints in a variety of fire rated structures. Tested following the principles of BS 476 part 20 (1987) as detailed in Warrington fire research report No. 144508/B (Feb 2005). The product, in suitably designed joints, will resist the passage of fire for up to 5-hours. The selected fillers used in this formulation also make it suitable for use as an acoustic sealant. When exposed to heat, it swells greater than 3 x its original size, so creating a char that will resist the passage of fire for up to 5 hours and no priming is required for most construction substrates. The Everbuild fire sealants are for use in joints up to 50mm wide and give excellent acoustic properties for sound deadening and the sealant is easy to apply and tool off for the perfect finish. Fast cure - tack free in 15-minutes, can be overpaintable and is Availiable in White or Brown.
3M™ Polyurethane Adhesive Sealant 540 is a one component, polyurethane sealant, perfect for use in transportation, metal working and many other applications.
Features and Benefits
• Flexible product for sealing applications
• Low modulus product that is great for sealing between different materials
• Paintable when dry
• 45-60 Minute skin time
Multi-Purpose Polyfilla® mixes to a smooth and creamy consistency. Special binders give adhesion which is guaranteed.
Features and Benefits
• Versatile filler; ideal versatile filler suitable for a variety of jobs
• Shrink resistant
• Crack resistant
• Drillable
• Fills up to 10mm
Typical Applications
• Indoor use
Notes
• Available in original powder or ready mixed
This ready-to-use clear silicone sealant is ideal for general-purpose sealing and bonding, providing strong adhesion to metal, glass, and glazed ceramics. As a versatile rubber adhesive, it fills spaces effectively and can be used to create formed-in-place gaskets. With rapid curing at room temperature, it achieves a high-modulus, non-slump finish and offers reliable acetoxy cure performance. Operating within a wide temperature range of -60°C to 204°C, it meets ISO 11600 standards, ensuring durability in demanding conditions. This Ambersil type 5024A sealant is supplied in a 310ml syringe, with a dry time of 24 hours for a 3mm layer and 72 hours for 5mm.
Features and Benefits
• Ready-to-use clear silicone sealant for sealing and bonding metal, glass, and ceramics
• Acts as a gap-filling rubber adhesive, ideal for in-place gaskets
• Rapid curing at room temperature with high modulus and non-slumping properties
• Acetoxy cure for strong, durable bonding
• Effective in temperatures ranging from -60°C to 204°C
Standards
• Conforms to ISO 11600