Rapid two-part adhesives are long lasting, strong, solvent-free adhesive which can be sanded or painted. This adhesive bonds to ceramics, metal, wood, chipboard, masonry, glass, dry concrete, leather, rubber, cardboard, fabric and most plastics (except polyethylene, polypropylene, Teflon®).
Features and Benefits
• Water resistant
• Chemical resistant
• Oil resistant
• Impact resistant
• High temperature resistance from -30° to 80°
• Solvent-free
• Eco-friendly packaging for easy recycling
• Environmentally friendly product formulation
Notes
• Before application, ensure surfaces are free from dust, corrosion, dirt and grease
• For optimum bonding, degrease metal with a suitable solvent and roughen the surface slightly with sandpaper
• Apply light pressure to the joint during assembly using clamps or tape until set (around 20 minutes)
• Suitable for handling and sanding after 2 hours of bonding
ITW Plexus® MA300 is a class-leading, two-part methacrylate adhesive designed for the structural bonding of thermoplastic, metal and composite assemblies. When combined at a 1:1 ratio, it has a working time of 4 to 6 minutes and achieves 75% of ultimate strength in 10 to 15 minutes at room temperature.
Features and Benefits
• Provides a combination of high strength and stiffness
• Excellent ability to bond a wide range of materials
• Supplied in ready-to-use cartridges
Typical Applications
• Thermoplastics
• Metal
• Composites
Notes
• Requires a dispensing using applicator gun CTL7151632E
3M™ Scotch-Weld™ Epoxy Adhesive 490 is a black, thixotropic, two component epoxy adhesive with particularly good application characteristics. It is designed for use where ultimate toughness and high strength are required. Perfect for gap filling.
Features and Benefits
• Get a tough, high strength adhesive
• Easy application
• Excellent heat and environmental resistance
• Drying time: 1.5hrs
• Heat resistant up to 120°C
Typical Applications
• Ideal for bonding ceramics, metal, plastic, rubber, textiles and wood
High strength glue for bonding all types of hardwoods, softwoods and wood composites. Can be used indoors and outdoors.
Short clamp time (20 - 30mins) fully cured in 24 hrs.
Features and Benefits
• Dries natural colour
• Non-clogging lid
• Fully paintable
Its high strength and quick set time makes Gorilla Super Glue the go-to adhesive for a variety of household projects. Developed for forming long-lasting repairs in an instant, the clear glue dries in 10-45 seconds.
Gorilla Super Glue is reinforced, providing increased impact resistance to handle bumps and drops with ease.
Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic*, metal, fabric, stone, ceramic, paper, rubber and more.
In addition to Gorilla Super Glue's high-performance cyanoacrylate formula, it boasts an anti-clog cap with a metal pin inside ensuring an airtight seal for maximum reusability.
Features and Benefits
• Incredibly strong
• Anti-clog tip with metal pin for clean nozzle
• 100% waterproof
• Gorilla glue is solvent-free
• Thick formula flows better for improved control
Bonds to a variety of substrates (especially bare metals) while resisting corrosion<CRLF>Withstands powder coat and paint bake cycles up to 400�F (204�C) for at least one hour<CRLF>Offers high shear, peel and impact strength for a tough and durable bond<CRLF>Provides excellent bond strength and impact resistance, even at temperatures down to -40�F (-40�C)<CRLF>7 minute work life and fast strength build-up at room temperature<CRLF>Ideal for industrial applications with minimal surface preparation, such as slightly oily metal bonding<CRLF>Moderate non-sag formula won't slump or spread excessively<CRLF><CRLF>Suggested Applications
Room temperature curing, high strength and peel strength.
Features and Benefits
• Multi purpose, highly versatile
• Rapid cure
• Perfect for Ferrous metals, aluminium, copper, zinc and galvanised metal, rubbers and wood etc.
• Light handling 20 mins
Notes
Resistance properties:
• Chemical - Good. Heat - Good.
• Size: 50ml, 200ml and 2.00kg.
Two part instant adhesive. Bonds a wide range of materials. Handling strength in seconds. Fills gap up to 5mm.
Gap fill: 5.00mm.
Colour: clear.
Temperature: -40 to +80°C.
Comment: high gap filling, 2-component, low bloom, very clear.
J-B Weld HighHeat is a heat-resistant epoxy adhesive for bonding and gap filling substrates exposed to high temperatures up to 260C (500F) Resistant to water, chemicals and heat. Perfect for repairing vehicle exhausts, rust damage and other high heat automotive parts. It can be used onaluminium, brass, copper, iron and stainless steel. Specifications: Bonding Strength: 4, 730 PSI.Set Time: 1 Hour.Cure Time: 24 Hours (room temp) or 1 Hour (with heat) .Colour When Dry: Dark Grey.Size: 25ml.
Gorilla Glue is a polyurethane glue. When exposed to moisture, the adhesive reacts and creates a foaming action that fills whilst it sticks. The glue is brown in colour, but dries a tan colour.
Features and Benefits
• Quick drying - Gorilla Glue has an open working time of 20 minutes
• Totally waterproof
• Gorilla Glue is incredibly strong - bonding all types of wood, including pressure treated wood. It also bonds stone, metal, ceramics, foam, glass, leather and much more
• Once dried the product is sandable, stainable, paintable and can also take a varnish
• Due to its foaming action the glue gives greater coverage - up to 3 times the coverage of other glues
• Ultra versatile - unaffected by extreme temperatures and will not break down when exposed to rain and snow
Typical Applications
• The Gorilla Glue formula bonds materials that typical all-purpose adhesives will not hold, including wood, stone, metal ceramics, glass, foam and even bonds dissimilar materials. It is waterproof and temperature resistant, which means it can be used for indoor and outdoor projects and repairs.
Notes
• Products sold individually - images for illustrative purposes only
Two-part adhesive ideal for rubber such as inflatables or wet suits. Use 9252 primer when bonding rubber to metal.
Features and Benefits
• Two-part cold curing adhesive system provides a class-leading rubber bond
• Provides strong, resilient bonds
• Excellent resistance to water and other weathering factors, such as UV
Typical Applications
• Ideal for rubber such as inflatables or wet suits
Notes
• Bonding Time: 20 to 30min
J-B Weld Original Cold-Weld™ Epoxy provides strong lasting repairs for metal, plastic, pvc, wood, fibreglass and ceramics. This original formula is known throughout the automotive industry as the Original Cold-Weld™. Cures consistently, no shrinkage/foaming. It can be sanded, drilled or tapped once set. Resistant to water, chemicals and heat. Great for: household repairs, automotive, plumbing, marine, crafts, brick, concrete and fibreglass. Specifications: Bonding Strength: 5,020 PSI.Set Time: 4-6 Hours.Cure Time: 15-24 Hours.Colour When Dry: Dark Grey.
Multi-bond. Two part no mix general part adhesive. Tough and impact resistant bond. Good peel strength. Bonds a wide range of substrates. NSF food approved.
Features and Benefits
• Ideal for bonding dissimilar substrates, like PVC, phenolic and acrylic compounds
• Quick fixture time
• Good impact resistance
Technical Information
• Adhesive type: acrylate.
• Gap fill: 0.50mm.
• Shear/peel strength: 15 - 30N/mm².
• Fixture time: 10 minutes.
• Temperature: -40 to +120°C.
Notes
• This product requires an activator - LOCTITE SF 7388.
Bonds most substrates including plastic, rubber, metal, card and wood. NSF food approved.<CRLF><CRLF>Gap fill: 0.05mm.<CRLF>Colour: clear.<CRLF>Temperature: -40 to +120°C.<CRLF>Comment: universal, low viscosity.<CRLF>
Apply this nozzle to a Plexus MA300 50ml cartridge to use the product. The nozzle has a built-in matrix grid to ensure that proper mixing has taken place before use. As such, this is an essential accessory.
Features and Benefits
• Essential accessory for a Plexus MA300 50ml adhesive
• Built-in matrix to ensure mixing
Typical Applications
• Thermoplastic, composite and metal assemblies
Notes
• Apply to Plexus MA300 50ml
This all-purpose adhesive bonds almost any material instantly, providing ultra-high strength for versatile use. It's weatherproofed and waterproof, even underwater, making it ideal for tasks like wall partitioning, flooring, and decking. Paintable and gap-filling, it offers quick, reliable adhesion for a wide range of indoor and outdoor applications.
Features and Benefits
• Bonds virtually any material instantly
• Weatherproof and waterproof, including underwater
• Ultra-high strength formula
• Suitable for various tasks like wall partitioning, flooring, and decking
• Paintable and gap-filling, offering quick, reliable adhesion for numerous applications
This range of epoxy mixer nozzles are designed for Araldite 2000 series cartridges. They support 50ml cartridge sizes, and a bayonet cartridge type.
Features and Benefits
• Range of epoxy nozzles
• 50ml size
• 20 mixing elements
• 5.9 inch in length
Typical Applications
• Designed for use with Araldite 2000 series cartridges
The 50ml static mixers are narrow cylindrical tubes which contain mixing elements.
Features and Benefits
• The elements are stationary parts that are positioned to force the materials to combine as they travel through the length of the mixer
• These mixers are low-cost and disposable after use
3M Fastbond Contact Adhesive 30NF is a water-dispersed, high-strength adhesive that has high coverage, immediate bond strength, a long bonding range and good heat resistance. Our adhesive bonds most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas to themselves and to each other.
2-part, grey epoxy adhesive for structural bonding that offers high technical performance.
Features and Benefits
• Provides a high temperature resistance - up to +180°C for heat resistant bonding and filling
• It is thermally conductive and delivers high compression strength
• Ideal for bonding metal components
Notes
• Adhesive type: epoxy.
• Gap fill: 0.50mm.
• Shear/peel strength: 20N/mm².
• Fixture time: 780 minutes.
• Temperature: -55 to +180°C.
J-B Weld Original Cold-Weld Epoxy Syringe. Thistwo-part epoxy system provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. It can withstand temperatures up to 550 when fully cured. Perfect for repairing vehicle exhausts, rust damage and other automotive parts. Suitable foruse on metal including aluminium, brass, copper, iron and stainless steel.
Specifications: Bonding Strength: 5, 020 PSI.Set Time: 4-6 Hours.Functional Cure: 15 Hours.Colour When Dry: Dark Grey.Size: 25ml.
Toughened with excellent peel strength adhesive. Long open time. Good on plastic.
Features and Benefits
• Forms a durable bond on almost any surface
• Extra-strong bond
• Medium viscosity, low density - SG = 1.0
Notes
• Adhesive type: epoxy.
• Gap fill: 0.50mm.
• Shear/peel strength: 37N/mm²/8N/mm.
• Fixture time: 180 minutes.
• Temperature: -55 to +120°C.
Multi-purpose methacrylate, suitable for service at temperatures up to 100°C. Ideal for ferrous metals, aluminium, ABS/PVC, acrylics, polycarbonates, polyamides, polystyrene foams, PU foams etc. Light handling four minutes.
Features and Benefits
• High shear and peel strengths
• Very fast curing
• Excellent gap filling properties
• Resistance Features -
• Chemical - Good. Heat - Excellent
• Water - Good. Impact - Excellent
Notes
• Size: 50ml and 380ml
Room temperature curing, high strength and ultra-tough multi-purpose epoxy.
Features and Benefits
• Versatile and excellent resistance to dynamic loading
• Ideal for large areas of bonding and/or a long working time
• Excellent impact resistance
Typical Applications
• Ideal for ferrous metals, aluminium, copper, zinc and galvanised metal, polyamides, polystyrene foams, PU foams, ceramics, wood etc. Light handling strength at seven hours
Notes
• Sizes: 50ml, 200ml and 2.00kg
A strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs which require adjustment thanks to a long working time. Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon®).
Features and Benefits
• Extra strong bond
• Fast curing - suitable for jobs where a fast initial bond but a long working time is required
• Provides an excellent bond on all common materials
• Low shrinkage
• Good resistance to dynamic loading
Simson 70-08 is a class-leading, high strength SMP (Silane Modified Polymer) windscreen bonding adhesive - designed for automotive and coachbuilding. 70-08 is used where both a fast bond and very high strength adhesive is required. Used with prep-m 'wash primer'.
Features and Benefits
• Excellent UV resistance and ageing resistance
• Excellent temperature resistance, permanent elastic within temperatures from -40°C till +120°C
• No odour
• Paintable
• Very low electrical conductivity. Suitable for use with window aerials
• Prevents contact corrosion on aluminium substrates
• Non staining
• Less than 1% carbon black content
• Possible reduced or noclamping required
Everbuild 101 Multi-Purpose Linseed Oil Putty is a hand-applied, setting glazing compound for sealing glass into metal and wooden frames. Benefits: - Easier to apply than most competitive putties.- Extended shelf life.- For wood and metal frames.- Added plasticiser improves adhesion and helps prevent cracking.- Single glazing of pretreated wooden and metal rebates. Limitations: - Unsuitable for plastic frames, heat-absorbing glass, double glazing or frames treated with decorative microporous stains.- Always mix contents of pack thoroughly to blend in any surface oil.- Do not overpaint until a surface skin has formed (minimum 7 days, maximum 30 days).
The Everbuild 502 Series All Purpose Weatherproof Wood Adhesive is a high-quality, resin based wood adhesive for all wood bonding. It can be used internally and externally and provides a high strength , impact-resistant bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Conforms to international standard EN 204 (D3) and BS 14256 for creep resistance.
The Loctite Output Adhesive Kit includes a 25ml syringe of Loctite 315 Adhesive and an 18ml activator bottle, ideal for bonding heat sinks to electronic components. It cures rapidly at room temperature, provides high thermal conductivity, and electrical insulation, with a consistent 0.15mm gap, perfect for efficient heat management.
Features and Benefits
• Rapid curing at room temperature
• High thermal conductivity for efficient heat dissipation
• Electrically insulating
• Consistent 0.15mm gap for precise bonding
• Controlled strength for easy repairs
A reusable flexible squeegee applicator. When hand applying film or premask, this tool is the perfect solution for FRP or other textured surfaces. This squeegee is available in blue (PA1-B) and in gold (PA1-G).
Features and Benefits
• The Gold Applicator has a nylon reinforced edge that resists damages and last longer than many other hand applicators.
• The Blue Applicator with a soft edge helps conform graphic film over very light textured substrates.
• For professional use
Notes
• Hand apply film to FRP or other textured surfaces with 3M™ Hand Applicators.
Machinable. Resistant to rust, CFCs and other chemicals. Bonds to other metals and thermoset plastics.
Max. operating temperature: 121°C.
Pot life: 60mins.
Mix ratio: 9.0:1.
Mitre Fast Bonding Kit is a two-part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives. Also suitable for bonding of MDF, rubber, PVCu, metals etc.
High strength, gap filling multi-purpose building adhesive based on a tackified solvent-free system for use in a wide variety of building and home improvement applications. Can be used where at least one of the substrates to be bonded is porous.
A transparent one-step pre-treatment for the improvement of the adhesion of sealants and adhesives to non-porous surfaces.
Features and Benefits
• Dries in approximately 5 minutes (dependent on conditions)
Typical Applications
• Pre-treatment of polyester (GRP)
• Pre-treatment of plain aluminium, steel, copper and brass surfaces
• Pre-treatment of powder coated metals
• Pre-treatment of ABS
• Pre-treatment of PVC
• Pre-treatment of lacquered metals (first make a test on the substrate to check possible effects)
J-B Weld MarineWeld Epoxy Syringe is a specially formulated two part Cold-Weld adhesive system providing strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others. Resistant to water, chemicals and UV. This innovative epoxy can be used for underwater applications once cured. At full cure it can be shaped, tapped, filed, sanded and drilled, retaining full strength above or below the waters' surface.
Specifications: Bonding Strength: 3, 200 PSI.Set Time: 20 Minutes.Cure Time: 15-24 Hours.Colour When Dry: White.Size: 25ml.
Rapid curing multi-purpose toughened structural methacrylate adhesive which produces superior load bearing bonds to engineered plastics, metals, ceramics and many other difficult substrates. Minimal surface preparation. Resistant to weathering, humidity and wide variations in temperature.
Low bloom low odour. Medium viscosity. Ideal where cosmetic appearance is required. Improved fixture strength on metal and plastic. Also for porous substrates and acidic surfaces.
Features and Benefits
• Clean, clear bond
• Low bloom, low odour, low viscosity
• Provides a strong bond, even on porous and acidic surfaces
Notes
• Gap fill: 0.10mm.
• Colour: clear.
• Temperature: -40 to +80°C.
• Comment: low bloom, low odour, low viscosity.
3M™ Scotch-Weld™ Urethane Adhesive 620NS is a flexible, two-part polyurethane based structural adhesive. Designed for when flexibility is required the adhesive effectively bonds composites, metals, wood, rubber and plastics.
Rapid setting with low shrinkage and non-sagging with a low open time, allowing you to adjust and reposition components if needed. Available in black or clear formulas for a perfectly blended adhesive solution.
Features and Benefits
• Excellent impact resistance thanks to a versatile polyurethane formula
• Easily adheres to a variety of substrates
• Low dispense viscosity and non-sagging for accurate placement
• Low temperature flexibility and low shrinkage
• Long open time provides ample opportunity to position and adjust work
• Excellent stress-strain performance thanks to flexible makeup
Typical Applications
• General bonding
• Construction
Notes
• Minimum Order Quantity: 24
Steel filled kneadable epoxy stick. Ideal for emergency sealing of pipes and tanks. Adheres to damp surfaces and cures under water. Smoothes welds, repairs small cracks in castings and fills oversize bolt holes. Chemical and corrosion resistant. Can be drilled, filed and painted. NSF food approved.
Shear/compressive strength: >6N/mm²/82.7N/mm².
Fixture time: 10min.
Max. temperature -30°C to +120°C.
Comments: emergency sealing of leaks in pipes and tanks.
High quality, all-purpose super glue. Handy to have around the house, and resistant to drying thanks to a re-sealable cap.
Features and Benefits
• Provides excellent strength
• Versatile and quick - incredibly fast bond to just about every surface
• Tube comes with re-sealable cap to prevent drying or leaking
Typical Applications
• Bonds plastic, wood, metals, ceramics, leather, porcelain, card, jewellery and most other common materials
3M Super 77 Multipurpose Spray Adhesive is an extremely versatile, fast-drying, and transparent spray adhesive that bonds a wide range of lightweight materials. Our fast, permanent bond provides fast results to keep projects moving ahead. The spray formula is easy to dispense and apply directly onto surfaces and materials where needed.
Ideal for producing a strong bond on contact, without the need for jigs, clamps or weights. Very high bond strength.
Features and Benefits
• Instant bond on contact
• Bonds most materials, even non-porous
• High strength - no need to support
• Fast drying formula
• Low odour
Pinkgrip will stick just about anything on a building site that needs sticking. Its amazing grabbing strength not only removes the need to pin under the workpiece to prevent slumping, but its revolutionary initial ‘Direct Bond’ eliminates the need for double stick methods. Pinkgrip can be used inside and outside and adheres to just about every building substrate.
Loctite Super Glue Precision is a convenient repair glue with an extra-long nozzle. It provides instant strength combined with transparent drying technology. Ensures durable, long-lasting and invisible repairs with accurate delivery. This instant glue not only withstands heavy loads but is also shock-resistant, waterproof and heatproof. Easy-to-use and practical, thanks to its anti-clog cap. Works on a variety of materials, from wood, rubber, plastic* and more. It even works as a leather glue. When you are ready to glue, ensure the surfaces you want to bond are clean, dry and close-fitting. Lightly dampen porous surfaces. Simply remove the cap and apply a small quantity of the liquid glue to one surface, press both surfaces together immediately and hold them in place until the bond sets. *except polyethylene (PE) or polypropylene (PP).
J-B Weld WaterWeld Epoxy Putty will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and portable water tanks; setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. Works on fibreglass, PVC plastic, copper, brass, iron and aluminium. Resistant to water, oil, gas, diesel, hydraulic fluids and most other chemicals.
Specifications: Bonding Strength: 1, 300 PSI.Temperature Resistant: up to 148C (300F) .Set Time: 25 Minutes.Cure Time: 1 Hour.Colour When Dry: Off White.Size: 57g.
Precision extruded to fit Stickfast glue guns and compatible with the majority of glue guns on the market.
MPS Multi Purpose
The most popular glue stick. Use for fabrics, upholstery, plastics etc. Long set time. All-purpose hotmelt with medium to long set time. Ideal for a wide range of industrial and general use applications.
Set time: 20-30 sec.
Set colour: clear.
Sizes:
Sticks 12 x 300mm (MPS12)
Sticks 18 x 300mm (MPS18)
Applicator gun: All models
Images are for illustration purposes only
Good adhesion to most substrates.
Solvent contact adhesive.
Adhesive type: solvent.
Gap fill: NA-face to face.
Shear/peel strength: 1.2N/mm²/2N/mm.
Fixture time: 5 - 20 minutes.
Temperature: -30 to +90°C.
Black rubber toughened instant adhesive. High viscosity. Ideal where bonded parts are subject to impact and peel.
Features and Benefits
• Resistant to shock loading
• High viscosity
• Suitable for bonding metal to metal to plastic or rubber
Notes
Gap fill: 0.20mm
Colour: black
Temperature: -40 to +100°C
Comment: black rubber toughened
3M Adhesion Promoter 4298UV is a liquid promoter used to improve the adhesion of 3M Acrylic Foam Tapes to low surface energy plastics such as thermoplastic olefins (TPO), thermoplastic urethanes (TPU), and polypropylene (PP).
Multi-purpose bonding agent, primer sealer, cement filler and plaster admixture. Bonds to most building and DIY materials except PVC and rubber. Conforms to BS5270.
Size: 1ltr.
Bondloc B2012 is a 2-part, rapid cold curing epoxy adhesive, that is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. Reacts within a few minutes to give a tough, resilient bond on a wide variety of surfaces. Specifications Mix Ratio 11 Work Life As a mix 4 1/2 - 5 minutes Size 25ml Part 1 Physical Form Viscous liquid Chemical Type Epoxy Appearance Clear Viscosity 25C 100 poise Specific Gravity 1.17 Part 2 Physical Form Viscous liquid Chemical Type Mercaptan and Polyamide Appearance Clear Viscosity 25C 130 poise Specific Gravity 1.14
A general purpose spray adhesive suitable for indoor and outdoor applications. Easy to use and an ideal substitute for double sided tape. Ideal for fixing floorings, upholstery, fabric, foam, polythene, foils, loose lay materials, cardboard and many other materials. Not suitable for use on vinyl or for mounting photographs. Test before use on new applications or unfamiliar materials to confirm suitability before use. Each 500ml can cover an area of 60 sq ft approximately (medium setting). Non-chlorinated and CFC free.
Gorilla Wood Glue is a non-toxic water based, solvent free polyvinyl acetate (PVA) glue that requires only 20-30mins clamp time and is fully cured in 24 hours. It is suitable for use indoors and outdoors and can be used on hardwoods, softwoods and wood composites. This glue dries with a natural finish.
Holds an incredible 300kg/m2 after just 15 minutes. When fully cured, a single cartridge will support the weight of three 40 tonne trucks!
The solvent-free adhesive resists extreme temperatures and movement and will even stick to damp surfaces. As it's waterproof, it's suitable for interior and exterior use.
Sticks materials including wood, MDF, plaster, brick, tiles, ceramics, plastics, PVC, concrete, stone, metal, glass and mirrors.
Size: 290ml cartridge
Colour: White
This solvent-free, 2-component epoxy adhesive sets in 90 seconds and bonds metal, wood, ceramics, glass, concrete, cardboard, leather, and most plastics. It's water-resistant, oil and chemical resistant, and can be painted or sanded. Ideal for high-temperature environments (-30°C to 65°C) and provides a clear, durable finish.
Features and Benefits
• Fast-setting for quick repairs
Effective on metal, wood, ceramics, glass, concrete, cardboard, leather, and most plastics
• Safe and environmentally friendly formulation
• Durable and impact-resistant with high temperature tolerance (-30°C to 65°C)
• Paintable and sandable. allows for a clean finish and customization
C).
This adhesive offers rapid bonding with a fast cure speed, making it ideal for time-sensitive tasks. It provides excellent moisture, chemical, and temperature resistance, performing reliably in cold temperatures. Suitable for a wide range of substrates, including metals, plastics, and rubbers, it is also impact and vibration resistant.
Features and Benefits
• Rapid bonding with fast cure speed
• Excellent moisture, chemical, and temperature resistance
• Effective in cold temperatures
• Impact and vibration resistant
• Versatile for metals, plastics, and rubbers
Loctite super glue is a high performance formula that creates a strong Instant bond for use on a wide variety of surfaces.
Features and Benefits
• High performance, instant power
• Sticks to almost every type of surface
• Ultra-durable bond
Structural Bonder with Good Impact Resistance
Suitable for a variety of substrates, including metals, most plastics and rubbers
Medium fixture speed (~10 mins)
Rapid strength development (full cure < 24 hours)
Excellent resistance to shock loading
High performance especially in large gaps
Grey formulation for mix indication
3M™ Nitrile High Performance Plastic Adhesive 1099 dries quickly with an open time of approximately 40 minutes. Its assembled bonds are proven to provide class-leading strength whilst resisting weathering and damage from water, oil and fuel. It also bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration.
Features and Benefits
• High performance adhesive forms strong bonds on most vinyls and plastics
• Resists weathering, water, oil, plasticizer migration and fuels
• Provides strong, quick drying flexible bonds
• Sprayable with industrial grade spray equipment
Gap filling properties. Non-sagging up to 5mm thickness. Low out gassing/ volatile loss. Temperature resistant to 120°C. Ideal for metals, electronic components, GRP structures etc. Light handling strength at 3 1/2 hours.
Resistance properties
Chemical - Excellent. Heat - Excellent.
Water - Excellent.
Very resistant to water and chemicals.
Size: 50ml, 200ml and 2.00kg.
Stick 2 CARPET FIX SPRAY is sprayable medium-duty glue which fixes P.U. and a foam backed carpets, carpet tiles, underlay, paper felt and cork to most common substrates. This product has the following advantages Economical in use. Fast rate of tack development. Time saving- easier and quicker to apply than most trowel/spreader applied adhesives. Foaming formula-gives low soak into substrates. CFC free. Repositionable.
Gorilla Glue is a polyurethane glue. When exposed to moisture, the adhesive reacts and creates a foaming action that fills whilst it sticks. Gorilla Glue has an open working time of 20 minutes. The glue is brown in colour, but dries a tan colour, and is totally waterproof. Gorilla Glue is incredibly strong, bonding all types of wood, including pressure treated wood. It also bonds stone, metal, ceramics, foam, glass, leather and more. Once dried the product is sandable, stainable, paintable and can also take a varnish. Due to its foaming action the glue gives greater coverage - up to 3 times the coverage of other glues. This glue is unaffected by extreme hot and cold and will not break down when exposed to rain and snow. The Gorilla Glue formula bonds materials that typical all-purpose adhesives will not hold, including wood, stone, metal ceramics, glass, foam and even bonds dissimilar materials. It is waterproof and temperature resistant, which means it can be used for indoor and outdoor projects and repairs. Originally used as a commercial adhesive for hard-to-glue materials. Once something is glued it will not come undone - it is set to survive years after the repair.
Gorilla Waterproof Patch & Seal Tape provides a strong and permanent bond that instantly stops leaks. It will even stick underwater. Ideal for patching holes, cracks, gaps and tears. For indoor and outdoor use. Suitable for use on plastic, wood, glass, aluminium, steel, vinyl, PVC etc.
LOCTITE® SF 770 is a primer used to make polyolefin and other low-energy surfaces suitable for bonding with LOCTITE® instant adhesives. It is only recommended for difficult-to-bond substrates which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. It is not recommended in assemblies where high peel strength is required. Improves adhesion of instant adhesives to polyolefins and other low surface energy plastics. Only for difficult-to-bond plastics.
Specifications: Brand LOCTITE MPN 2731763 Unit Of Measure 10 Grams Weight (kg) 0.01
Milliput Standard Yellow/Grey Modelling & sculpture D.I.Y & plumbing repairs Picture frame restoration Marine repairs Standard Milliput is our general purpose grade - it has been used for many years for the toughest tasks. Suitable for modelmaking, sculpting, picture frame restoration, DIY, marine and plumbing repairs. Temporary repairs for car petrol tanks, batteries, radiators and exhausts
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Increases cure speed on passive and inactive surfaces. For large bond gaps. Suitable for low temperature curing.
Features and Benefits
• Accelerates bonding dramatically
• Cyanoacrylate activation technology
• Convenient application
Precision extruded to fit Stickfast glue guns and compatible with the majority of glue guns on the market.
HSS
Higher strength for assembly. Excellent on many plastics, metal & wood.
HSS
High Strength
Assembly grade hotmelt for ‘difficult’ surfaces. Excellent adhesion and high molten tack for quick fixing of tile displays, carpet fitting etc.
Set time: 20-30 sec.
Set colour: Amber.
Size: Sticks 12mm x 300mm (HSS12)
Applicator gun: All models
Speed cure on passive metals and for large bond gaps, prevailling temperature is low (<15°C).
Size: 150ml and 500ml.
Loctite 7457 is used where increased cure speed of Loctite cyanoacrylate adhesives is required.
It can be applied to the bond before or after assembly. When used pre-applied, its presence can be detected by fluorescence.
Features and Benefits
• Formulated to provide good on-part life.
• Especially suited for post-application on cyanoacrylate adhesives to ensure rapid curing.
Typical Applications
• Securing wires or coils to PCBs, tamper-proofing adjustable components, mounting stand-offs, edge guides and board stiffeners.
3M Scotch-Weld Instant Adhesive Activator AC11 is a solvent- based activator formulated to increase the cure speed of Scotch-Weld cyanoacrylate adhesives.
The Loctite manual handheld dispenser is an essential tool for precision adhesive application, designed to efficiently dispense adhesive directly from 50 and 250ml bottles. This dispenser seamlessly attaches to a Loctite anaerobic adhesive bottle, transforming it into a convenient dispensing system. Whether you're working on intricate projects or need controlled adhesive application, this handheld dispenser ensures ease of use and accuracy in every application. Elevate your adhesive dispensing process with the reliability and convenience of the Loctite manual handheld dispenser.
Features and Benefits
• Attaches to a bottle of Loctite anaerobic adhesive to create a dispensing system
• Dispenses an average of 30mg of adhesive with a single trigger pull
• Prevents spills, eliminates waste and mess, and can be folded down 90° to allow for easy storage
• The nozzle can be positioned in three ways - horizontal, 45° up, and 45° down
Notes
• Includes pump only
Araldite 2-part Epoxy Adhesive: renowned for its unparalleled quality and strength, it stands as the market's strongest and most durable adhesive. This hard, solvent-free repair putty is a versatile, long-lasting solution. Waterproof and adaptable, it can be drilled, filled, painted, or sanded, forming strong bonds on various materials. Ideal for metal pipes, tanks, radiators, tools, equipment, guttering, and stripped threads.
Features and Benefits
• Indoor and outdoor use
• Fills large gaps and cracks
• Drillable, paintable, and sandable
• Sets in wet conditions
• Environmentally friendly formulation and eco-packaging
• High temperature resistance
J-B Weld KwikWood Epoxy Putty is hand-mixable. Formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color. Perfect for repairing dry rot, screw holes, insect damage and furniture.
Specifications: Set Time: 15-25 Minutes.Cure Time: 1 Hour.Colour When Dry: Tan.Size: 57g.
Black
Easily applied with 3M primer applicator
Quick to cure
Application temperature range 5 - 25 C
Suggested Applications
Scotch-Weld™ Epoxy Adhesive DP100 is a fast-setting, two-part epoxy ideal for bonding, sealing, encapsulating, and potting applications that demand clarity and strength. Designed to provide a strong, permanent bond even under vibration and impact, it offers high shear and peel strength with handling strength achieved in just 15-20 minutes at room temperature. The low-viscosity, clear-drying formula ensures easy dispensing and effective coverage, making it suitable for use in precision or visually sensitive applications. Flexible when cured, it's especially effective for bonding dissimilar materials like glass, metal, ceramics, wood, and many plastics. Compatible with 3M™ EPX™ applicators and mixing nozzles, it supports accurate, efficient mixing and application.
Features and Benefits
• Rapid-curing dual-component epoxy for swift application
• Delivers durable adhesion even under movement or stress
• Resists high shear and peeling forces effectively
• Achieves initial strength within minutes at room temperature
• Smooth-flowing consistency for precise and effortless application
• Cures with a clear finish, ideal for neat or visible joints
• Retains flexibility after curing, making it ideal for mixed-material use
• Suitable for bonding a wide range of substrates including metal, glass, and plastic
• Works seamlessly with EPX tools for consistent mix and flow
Polychloroprene based contact adhesive thats suitable for bonding laminate plastic sheeting to wood, metals and most types of board. Easily applied by brush or spreader. Resultant bond gives excellent strength, high sheer strength and temperature resistance.
Loctite 410 is a high-viscosity, ethyl-based adhesive in a 20g dispenser. It bonds polyolefins, plastics, rubbers, and metals with a fixture time of 30 to 60 seconds. Ideal for small to medium parts, it cures quickly, is solvent-free, and provides strong, reliable adhesion.
Features and Benefits:
• Ensures strong bonding
• Versatile material compatibility
• Fast setting for efficient use
• Environmentally friendly
• Perfect for precise applications
This two-part fast cure elastic silicone sealant offers excellent bond strength to glass, metals, ceramics, and most plastics. It withstands temperatures up to 180 °C and is ideal for high-temperature applications, including sealing glass stove tops and reducing weld requirements, ensuring durability and reliability in critical bonding scenarios.
Features and Benefits
• 2-part, fast-curing alkoxy silicone adhesive
• Excellent bond strength to glass, metals, and Ceran
• Hot strength up to +180°C, with resistance to higher short-term temperatures
• Suitable mixing ratio of 2:1
• Ideal for sealing/bonding glass stovetop assemblies and high-temperature applications
SA-90
Provides a strong flexible bond for many applications where a conventional adhesive would be too difficult to apply. Ideal for use on foam backed carpets, underfelt and for spot fixing carpet tiles. Can also be used to bond all types of flexible foams, fabrics, felt, cork etc to plywood, softwood, MDF, laminates, metal, hardboard, glass, rigid plastics etc. Easily applied straight from the can.
Size: 500ml.
Ultra clear bond-line. Toughened resulting in a durable bond. Medium viscosity. Fast cure.
Features and Benefits
• Incredibly fast cure - perfect for tasks that require fast fixing
• Highly durable bond
• Medium viscosity
Notes
Adhesive type: epoxy.
Gap fill: 1.00mm.
Shear/peel strength: 25N/mm²/3N/mm.
Fixture time: 15 minutes.
Temperature: -40 to +100°C.
A low viscosity adhesive that sets fast. Bonds materials such as metal, rubber, plastics and wood in seconds.
Cascamite is specially formulated for exterior joinery exposed to the weather. The powder system enables extremely good gap filling properties ensuring water does not enter the joint and produces the strongest bond. It attains bond strength very fast, enabling it to be used for load bearing and laminating. Use internally and externally where high bond strength/gap filling/water resistance is required. Ideal to use for: • exterior joinery • windows • doors • gates • garden furniture • boats • shopfitting• interior joinery • kitchens • worktops • bathrooms • veneering • laminating. Unique Qualities• clear glue line • non staining • gap filling • does not discolour hardwood • load bearing• makes 50% more when mixed • fast bond build up • mould resistant.
This non-drip, non-stringing contact adhesive has Thixotropic ( the property of certain gels or fluids that are thick or viscous under normal conditions, but flow or become less viscous over time when shaken or agitated) as a main formula that allows slight adjustment of small areas. This contact adhesive is ideal for vertical and overhead surfaces, has high strength with a permanent bond, and low odour. BONDS: Decorative laminates, Rigid PVC, Wood, Chipboard, Hardboard, Cork, Leather, Rubber, Stone, Metal, Dense film fabrics, Ceramics, Glass. (Not suitable for use on polystyrene or cellulose painted surfaces).
Loctite Super Glue Power Gel is formulated with cyanoacrylate rubber-infused gel formula, this instant glue allows powerful bonds which are extremely precise even on vertical surfaces and materials requiring high flexibility. Strong resistance with instant strength in a single drop, this super glue ensures durability whilst drying transparently. This multi material glue works on a variety of materials: wood, rubber, plastic* and more. It even works as a leather glue. The adhesive not only withstands strong conditions but is also shock resistant, waterproof and heatproof. Before starting, ensure the surfaces you want to bond are clean, dry and close-fitting. Simply remove the cap and apply a small quantity of the power glue gel to one surface, press both surfaces together immediately and hold them in place until the bond sets. Simple! *except polyethylene (PE) or polypropylene (PP).
Bostik Fast Tak is a permanent spray adhesive in an aerosol can. Ideal for presentations, crafts and household repairs. Good for bonding a variety of materials including paper, card, foam, leather, rubber, hard plastics, metal, wood, hardboard, stone and even concrete.
The Araldite Standard Epoxy Syringe is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs that require adjustment thanks to a long working time. It has a long & lsquoworking time&rsquo with parts positionable for around 80 minutes, so is ideal for projects and complicated heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics. It achieves a full ultra-strong bond in around 14 hours and when used in line with the instructions printed on the pack will give you dependable, long-lasting results. Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon). The 2-component epoxy with long 'working time'. Parts repositionable for 80 minutes. Oil, chemical and impact resistant. High-temperature resistance (-30C to 80C). Withstands rough handling.
MoTip Pro Gasket Remover Spray provides fast and easy removal of dried adhesives and seals, as well as hardened sealing material from car and machine parts. It is non-conductive and non-corrosive. Fitted with a directed jet spray for ease of use.
GRGGHDSA400 Heavy-Duty Spray Adhesive 400ml
Gorilla® Heavy-Duty Spray Adhesive forms a clear, permanent bond which is moisture resistant and can be used on projects both indoors and out. This spray adhesive is also photo safe. Its wide pad nozzle and controlled, fine mist spray provide an even application on the project you are working on.
APPLICATION TEMPERATURE: Above 47°F OPEN ASSEMBLY TIME: 8-10 minutes (70°F./50%RH) TOTAL ASSEMBLY TIME: 20-25 minutes (70°F./50%RH) MINIMUM REQUIRED SPREAD : Approximately 6 mils or 250 square feet per gallon REQUIRED CLAMPING PRESSURE: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) METHOD OF APPLICATION: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. CLEANUP: Damp cloth while glue is wet. Scrape off and sand dried excess. LIMITATIONS: Titebond III Ultimate Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact our Technical Support Team at 1-800-347-4583. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
3M Spray Mount Adhesive Spray 200ml 7000116723 Excellent for short-term bonding, such as making layouts, mock-ups, visuals, mounting designs, display boards and more. Repositionable for up to 12 hours once sprayed, dries clear and does not wrinkle or stain.
