Find Adhesives & Sealants Products
Here at Zoro, you can choose from a huge range of adhesives and sealants, including quality sealants and gaskets, as well as instant, two-part, and structural and grab adhesives.
Resistant to commonly used fuels, lubricants and coolants, is non-corrosive and free
from abrasive fillers.
100ml - Tube.
500ml - Tin.
Multi-purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a powerful anti-fungicide to prevent mould growth. Sealing around worktops, laminates baths, showers, basins and other sanitary ware, etc.
Features and Benefits
• Very fast cure
• Permanently flexible yet incredibly high strength bond
• Waterproof seal
Notes
• Cartridge size: C3 280ml.
STEAMSEAL is a high pressure setting pipe sealant made up of manganese and graphite which offers efficient sealing for ferrous and non ferrous pipework.
Features and Benefits
• Joints that have been sealed with Steamseal are easy to break and clean
• Wide temperature range from -20°C to +600°C
• Sets hard but is flexible enough to resist contraction of pipework, vibration and thermal expansion
• Resist pressures of up to 193 bar (2800 psi)
Typical Applications
• Steam, water and air joints
• Metallic threaded joints
Leading non-setting gasket and sealing compound in use world-wide. Non-hardening and non-setting allows for unlimited assembly time. Vibration-resistant. Allows metal to metal contact.
Features and Benefits
• Resistant to oils, lubricants and fuels
• Withstands rapid variations in temperature with ease
• Vibration resistant
• Flame, dust and moisture proofing properties
Notes
• Should not be used on: sheet metal parts; assemblies where soft thick gasketing material was specified; or as a gap filler
577 is a thread sealant that is designed for the locking and sealing of metal pipes and fittings, as well as other threaded assemblies. The sealant works by filling the space between threaded parts and seals whilst locking at the same time.
Features and Benefits
• Provides an instant, low-pressure seal for metal pipes and fittings
• Will not creep, shrink or shred and has excellent chemical and thermal resistance, offering less migration of liquid product after application
• Ensures high strength on contaminated surfaces and high performance on passive metals without an activator
Typical Applications
• For straight/straight and straight/taper threads and fittings
Rapid two-part adhesives are long lasting, strong, solvent-free adhesive which can be sanded or painted. This adhesive bonds to ceramics, metal, wood, chipboard, masonry, glass, dry concrete, leather, rubber, cardboard, fabric and most plastics (except polyethylene, polypropylene, Teflon®).
Features and Benefits
• Water resistant
• Chemical resistant
• Oil resistant
• Impact resistant
• High temperature resistance from -30° to 80°
• Solvent-free
• Eco-friendly packaging for easy recycling
• Environmentally friendly product formulation
Notes
• Before application, ensure surfaces are free from dust, corrosion, dirt and grease
• For optimum bonding, degrease metal with a suitable solvent and roughen the surface slightly with sandpaper
• Apply light pressure to the joint during assembly using clamps or tape until set (around 20 minutes)
• Suitable for handling and sanding after 2 hours of bonding
ITW Plexus® MA300 is a class-leading, two-part methacrylate adhesive designed for the structural bonding of thermoplastic, metal and composite assemblies. When combined at a 1:1 ratio, it has a working time of 4 to 6 minutes and achieves 75% of ultimate strength in 10 to 15 minutes at room temperature.
Features and Benefits
• Provides a combination of high strength and stiffness
• Excellent ability to bond a wide range of materials
• Supplied in ready-to-use cartridges
Typical Applications
• Thermoplastics
• Metal
• Composites
Notes
• Requires a dispensing using applicator gun CTL7151632E
A grease-like silicone material, thickened with heat conductive metal oxides.
Features and Benefits
• High thermal conductivity with low bleed
• No drying, hardening or melting
• Stable at high temperatures
• Suitable for the base and mounting studs of transistors, diodes and effective many heat sink devices
Notes
• Dispensing Method: Tube
• Conductivity: 0.67W/m.k
3M™ Scotch-Weld™ Epoxy Adhesive 490 is a black, thixotropic, two component epoxy adhesive with particularly good application characteristics. It is designed for use where ultimate toughness and high strength are required. Perfect for gap filling.
Features and Benefits
• Get a tough, high strength adhesive
• Easy application
• Excellent heat and environmental resistance
• Drying time: 1.5hrs
• Heat resistant up to 120°C
Typical Applications
• Ideal for bonding ceramics, metal, plastic, rubber, textiles and wood
LOCTITE® 270 is a high-strength threadlocker that results in maximum efficacy when securing and sealing of bolts, nuts and studs.
Features and Benefits
• Prevents loosening due to vibration and serves to permanently lock assemblies which must not come loose
• Works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• Tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
Typical Applications
• Assembly
• Metal work
High strength glue for bonding all types of hardwoods, softwoods and wood composites. Can be used indoors and outdoors.
Short clamp time (20 - 30mins) fully cured in 24 hrs.
Features and Benefits
• Dries natural colour
• Non-clogging lid
• Fully paintable
Easy break, smooth consistency, lead-free jointing compounds.
Type ‘A’
Thin consistency, for small joints which are new or undamaged.
Type ‘B’
Thick consistency, for use on uneven surfaces.
An everyday masking tape that can be used on most surfaces.
Features and Benefits
• Temperature resistant up to 60 degrees
• Available in a wide range of widths to suit any general needs
Typical Applications
• Ideal for packing, masking, labelling, bundling and joining
A general multi-purpose adhesive/sealant that is a one-component silicone rubber. Simply apply to the prepared surfaces, then quickly cover with the other item to be bonded. Ideal for sealing joints, wire entries and connectors, waterproofing pumps and glass to metal bonds. FDA approved.
Features and Benefits
• Adheres to a variety of surfaces
• Excellent resistance to weathering, moisture and temperature
• Cures at room temperature to a tough, flexible rubber
• Stable and flexible from -60°C to 180°C
High performance masking tape designed to meet demanding paint masking situations. Excellent solvent and water resistance - perfect for masking a car prior to spraying with either solvent based or water-based paint.
Features and Benefits:
• Water and solvent resistance ensures excellent adhesion if product gets wet.
• Low tack masking tape offers excellent surface adhesion, minimising the chances of peeling off during the job.
• Blue colour enables easy identification of the water resistant tape.
External frame sealant is an acrylic based sealant which provides a long lasting, permanently flexible seal. This sealant is high quality, adheres to most surfaces and can be over-painted when cured.
Features and Benefits
• Mould resistant for long term use
• Easy clean up
• High quality, versatile sealant
Typical Applications
• Timber
• Aluminium door frames and windows
Its high strength and quick set time makes Gorilla Super Glue the go-to adhesive for a variety of household projects. Developed for forming long-lasting repairs in an instant, the clear glue dries in 10-45 seconds.
Gorilla Super Glue is reinforced, providing increased impact resistance to handle bumps and drops with ease.
Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic*, metal, fabric, stone, ceramic, paper, rubber and more.
In addition to Gorilla Super Glue's high-performance cyanoacrylate formula, it boasts an anti-clog cap with a metal pin inside ensuring an airtight seal for maximum reusability.
Features and Benefits
• Incredibly strong
• Anti-clog tip with metal pin for clean nozzle
• 100% waterproof
• Gorilla glue is solvent-free
• Thick formula flows better for improved control
Highly durable Nitrile 'O' Ring Service Kits, available in Imperial and Metric sizings.
Features and Benefits
• Supplied in a durable storage box with sunken cavities for the simple location of the correct sized rings
Size range
• Inch kit: 1/8" - 2".
• Metric kit: 3mm - 50mm
Standards Met
• Inch 'O' Rings manufactured to BS1806
• Metric 'O' Rings manufactured to DIN7715
The ultimate combined building adhesive and sealant.
Features and Benefits
• Based on hybrid polymer technology, with the power to both bond and seal virtually anything in virtually all conditions, even under water or in the rain
• Offers almost limitless benefits as an adhesive and a sealant removing the previous application barriers associated with conventional products
3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS is a high-performance two-part structural adhesive designed to create strong, durable bonds to bare and slightly oily metals with minimal surface preparation. Offering excellent impact resistance and corrosion protection, it withstands demanding industrial environments including powder coat and paint bake cycles up to 204ºC. Ideal for aerospace, automotive, metal fabrication, and specialty vehicle assembly, this moderate-viscosity adhesive delivers fast strength build-up at room temperature, reducing downtime and eliminating the need for welding or mechanical fasteners. Its versatile bonding capability extends to many plastics, making it a reliable choice for long-lasting, tough repairs and manufacturing.
Features and Benefits
• Corrosion-resistant for durable, long-lasting bonds
• Withstands heat up to 204ºC (paint bake and powder coat cycles)
• Maintains impact resistance down to -40ºC
• Moderate non-sag viscosity for precise application on vertical surfaces
• Long shelf life with no refrigeration needed
• Bonds bare metals and many plastics
Typical Applications
• Bonding bare or slightly oily metals
• Metal fabrication and industrial assembly
• HVAC equipment and appliances
• Specialty and recreational vehicles
• Signage and structural assemblies exposed to high heat
High-quality, reliable, general-purpose masking tape. Suitable for a wide range of applications including holding, fixing, sealing and wrapping. Allows for a clean, residue-less removal. Highly effective up to 80°C.
Features and Benefits
• Good holding power and resists lifting
• Clean removal after low temperature bake cycles
• Ideal for bundling, labelling and identifying
• Conformable tape, does not tear when unfolding
• Easy to pull off the roller
Applications:
• General purpose - suitable for holding, fixing, wrapping, sealing, painting, etc.
A high quality blue creped paper masking tape with an acrylic adhesive. The special adhesive provides clean removability from a wide variety of surfaces for up to 14 days.
Features and Benefits
• Blue
• High quality
• Crepe paper
• With acrylic adhesive
• Clean removability for up to 14 days
Notes
• Priced per roll
• Images are for illustration purposes only
Room temperature curing, high strength and peel strength.
Features and Benefits
• Multi purpose, highly versatile
• Rapid cure
• Perfect for Ferrous metals, aluminium, copper, zinc and galvanised metal, rubbers and wood etc.
• Light handling 20 mins
Notes
Resistance properties:
• Chemical - Good. Heat - Good.
• Size: 50ml, 200ml and 2.00kg.
LOCTITE® 603 is a high strength retaining compound that has a high oil tolerance and is ideal for sintered bearings.
Features and Benefits
• High strength formulation means the retaining compound is ideal for use on close-fitting cylindrical parts
• This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration
Typical Applications
• Manufacturing
Approvals
• NSF
Extremely flexible PVC electrical tape with a great adhesion to most surfaces. Perfect for wire and cable insulation, bundling and reinforcing. Assorted colours are available for colour-coding cables. Highly flame retardant.
Features and Benefits
• Abrasion resistant
• Flame retardant
• Extremely flexible
• Ideal for colour coding cables
Standards
• Manufactured to BS EN 60454-3-1/Type 2 (Formerly BS 3924) and BS 4J10:1991.
Technical Information
• Thickness: 0.13mm (5mil).
• Adhesion: 0.47kg/25mm. (16.5oz/1").
• Tensile strength: 5.2kg/25mm (11.5lb/1").
• Elongation: 150%.
• Breakdown voltage: 5.5kV.
• Insulation class: 80°C.
Notes
• Colours available: Black, white, red, blue, yellow, green/yellow, grey, brown
• 19mm
• Available as individual tapes or in sets of 8
Two part instant adhesive. Bonds a wide range of materials. Handling strength in seconds. Fills gap up to 5mm.
Gap fill: 5.00mm.
Colour: clear.
Temperature: -40 to +80°C.
Comment: high gap filling, 2-component, low bloom, very clear.
J-B Weld HighHeat is a heat-resistant epoxy adhesive for bonding and gap filling substrates exposed to high temperatures up to 260C (500F) Resistant to water, chemicals and heat. Perfect for repairing vehicle exhausts, rust damage and other high heat automotive parts. It can be used onaluminium, brass, copper, iron and stainless steel. Specifications: Bonding Strength: 4, 730 PSI.Set Time: 1 Hour.Cure Time: 24 Hours (room temp) or 1 Hour (with heat) .Colour When Dry: Dark Grey.Size: 25ml.
Gorilla Glue is a polyurethane glue. When exposed to moisture, the adhesive reacts and creates a foaming action that fills whilst it sticks. The glue is brown in colour, but dries a tan colour.
Features and Benefits
• Quick drying - Gorilla Glue has an open working time of 20 minutes
• Totally waterproof
• Gorilla Glue is incredibly strong - bonding all types of wood, including pressure treated wood. It also bonds stone, metal, ceramics, foam, glass, leather and much more
• Once dried the product is sandable, stainable, paintable and can also take a varnish
• Due to its foaming action the glue gives greater coverage - up to 3 times the coverage of other glues
• Ultra versatile - unaffected by extreme temperatures and will not break down when exposed to rain and snow
Typical Applications
• The Gorilla Glue formula bonds materials that typical all-purpose adhesives will not hold, including wood, stone, metal ceramics, glass, foam and even bonds dissimilar materials. It is waterproof and temperature resistant, which means it can be used for indoor and outdoor projects and repairs.
Notes
• Products sold individually - images for illustrative purposes only
Versatile double coated high tack transparent solvent-free acrylic adhesive tape with a white printed pp filmic liner. Combines a high level of peel and shear performance whilst enabling high adhesion to a wide variety of substrates.<CRLF><CRLF>Features and Benefits<CRLF>• Highly versatile with the capability to bond to a wide range of substrates from low to high surface<CRLF>• Humidity resistance with high initial tack<CRLF>• Designed with filmic liner for high level of peel and shear that for easy converting and handling performance<CRLF>• High temperature resistance tape that provided full bonding performance which ranges up to +190 ˚C short term and up to +90 ˚C long term<CRLF><CRLF>Typical Applications<CRLF>• High/low surface energy substrates<CRLF><CRLF>Notes<CRLF>• High Tack Acrylic<CRLF>• Solvent-free<CRLF>• Global footprint base indicator:1
Two-part adhesive ideal for rubber such as inflatables or wet suits. Use 9252 primer when bonding rubber to metal.
Features and Benefits
• Two-part cold curing adhesive system provides a class-leading rubber bond
• Provides strong, resilient bonds
• Excellent resistance to water and other weathering factors, such as UV
Typical Applications
• Ideal for rubber such as inflatables or wet suits
Notes
• Bonding Time: 20 to 30min
Highly resistant to steam and hot water and automotive fluids. Inhibits galvanic corrosion between dissimilar metals. Operating temperature range: -40 to 250°C.
Available in 40ml and 80ml tubes.
Mildew Resistant Silicone Sealant for Refrigeration Units
A one-part, acetoxy, silicone rubber sealant which has excellent adhesion to a variety of surfaces.Contains a food grade fungicide. Ideal for sealing refrigeration units and areas where food contact is likely. (Meets US Food and Drugs Administration Regulation Number 21CFR177.2600)
Features and Benefits
• Conforms to BS5889 Type B
• Fast cure
• High modulus-acetoxy cure type
• Silicone & Acrylic Sealants - Dow Corning
Typical Application
• Refrigeration Units
Notes
• Minimum Operating Temperature: -50°C
• Maximum Operating Temperature: +150°C
• Chemical Type: Acetoxy
• Physical Properties: High Modulus
• Cure Time: 24 (2.5 mm) h
• Product Form: Paste
• Operating Temperature Range: -50 to +150 °C
Loctite 5940 is a 1-part, room temperature vulcanizing acetoxy silicone sealant ideal for sealing and bonding. It adheres to metal, glass, ceramics, and plastics, forming a tough, waterproof, and oil-resistant bond. With temperature resistance from -50°C to +200°C, it's perfect for demanding environments. Solvent-free and crack-resistant.
Features and Benefits
• Solvent-free for safer use
• Outstanding resistance to ageing, shrinkage, cracking, and discolouring
• Cures with moisture exposure, forming a tough, flexible, waterproof, oil-resistant silicone rubber bond
• Ideal for applications with an operating range of -50°C to +200°C, and short-term exposure up to +220°C
J-B Weld Original Cold-Weld™ Epoxy provides strong lasting repairs for metal, plastic, pvc, wood, fibreglass and ceramics. This original formula is known throughout the automotive industry as the Original Cold-Weld™. Cures consistently, no shrinkage/foaming. It can be sanded, drilled or tapped once set. Resistant to water, chemicals and heat. Great for: household repairs, automotive, plumbing, marine, crafts, brick, concrete and fibreglass. Specifications: Bonding Strength: 5,020 PSI.Set Time: 4-6 Hours.Cure Time: 15-24 Hours.Colour When Dry: Dark Grey.
Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling. Loctite® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. <CRLF><CRLF>Features and Benefits <CRLF>• High strength formulation means the retaining compound is ideal for use on close-fitting cylindrical parts<CRLF>• This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration<CRLF><CRLF>Typical Applications<CRLF>• Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings<CRLF><CRLF>Notes<CRLF>• Colour: Yellow<CRLF>• Temperature range: -55 to 150°C
Multi-bond. Two part no mix general part adhesive. Tough and impact resistant bond. Good peel strength. Bonds a wide range of substrates. NSF food approved.
Features and Benefits
• Ideal for bonding dissimilar substrates, like PVC, phenolic and acrylic compounds
• Quick fixture time
• Good impact resistance
Technical Information
• Adhesive type: acrylate.
• Gap fill: 0.50mm.
• Shear/peel strength: 15 - 30N/mm².
• Fixture time: 10 minutes.
• Temperature: -40 to +120°C.
Notes
• This product requires an activator - LOCTITE SF 7388.
Ronseal High Performance Wood Filler is a chemically bonded filler and catalyst that provides extremely tough repairs to virtually any wood damage without shrinking or cracking. Fills to any depth and can be drilled, screwed or planed. Ideal for use in interior or exterior wood repairs more than 5mm deep. Typical areas include window frames, sills, doors and door frames. For minor and surface wood repairs use Ronseal Multi Purpose Wood Filler. Available in: Natural, Dark or White. Application: Filling Knife.Drying Time: approx 30 mins.Protection Level: Very High.
Bonds most substrates including plastic, rubber, metal, card and wood. NSF food approved.<CRLF><CRLF>Gap fill: 0.05mm.<CRLF>Colour: clear.<CRLF>Temperature: -40 to +120°C.<CRLF>Comment: universal, low viscosity.<CRLF>