York Inox cutting discs are perfect for efficiently cutting metal with minimum material removal and machine wear, thanks to their thin profile. They are suitable for use with all appropriate handheld grinders and can even be used on stainless steel.
There are a wide range of sizes available, with 180mm and 230mm sizes suitable for use on circular saws.
Features and Benefits
• Thin profile allows for quick and efficient cuts with minimal material removal and machine wear
• Wide range of sizes allow for usage on a variety of appropriate handheld grinders and larger sizes can even be used in circular saws
Notes
• Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°
Wheel Dresser has been designed for dressing, truing, sharpening and removing glaze from solid abrasive grinding wheel.
Features and Benefits
• Heat treated body with powder coated finish
• Cast iron handle ergonomically designed for a comfortable grip
• Cutters have star shaped teeth that expose new grains and thus provide a fresh surface on the wheels
Notes
• Always use the proper dresser for the size of the grinding wheel you are dressing
Aluminous oxide stone suitable for all general purpose applications. All our 150mm grinding stones fit 13mm axles and are supplied with 32-13mm reduction bushes where applicable.
355mm x 3mm x 25.4mm.
Metal cutting abrasive 355mm diameter Cut off Saw wheel can be used to cut metal, extrusions, welds, tubing, trunking, pipes, etc.
Specification:
Diameter: 355mm.
Bore: 25.4mm.
Thickness: 3mm.
Centre: Flat.
Quantity: 5.
Replacement Wheel Sets
Features and Benefits
• Highly durable spare wheels
• Fits Kennedy Huntington wheel dressers
Strong knurled handle for safe grip and accurate positioning. Diamond faced dressing edge for increased efficiency and extended wear lifetime. Suitable for cleaning, truing and sharpening grinding faces. Suitable for use with any bench grinder.
Coarse and fine grades of grinding paste in a handy, easy to use double ended tin.
Features and Benefits
• Grinding paste removes: burrs, surface defects, corrosion and deposits.
• Tin is double-ended and includes fine paste (220 grit) to finish and coarse paste (80 grit) to cut
• Silicon lithium and carbide based formula which is non drip
• Fast cutting, non-drip silicon carbide and lithium based formula manufactured in the UK
Typical Applications
• Automotive
• Agricultural
• Garden
• Marine engines
• Oilfield
• Other general engineering applications
Silicon Carbide Grease Mixed.
For cutting brass, hardened steel and cast iron. Ideally used within the automotive and engineering industry. For heavy and light stock removal applications, from the removal of pits in exhaust pipes to the finishing of inlet valves.
Features and Benefits
• Provides excellent results when cutting brass, hardened steel and cast iron
• Often used within the automotive and engineering industry
• Durable formula makes it ideal for heavy and light stock removal applications
These are straight centered cutting discs for metal, which provide consistently great performance. They are appropriate for hand-held angle grinders. These cutting discs comply with safety requirements, including EN 12413.
Features and Benefits
• High performing cutting disc
• Aluminium oxide design
• Use with angle grinders
Typical Applications
• Ideal for use with steel and ferrous metal
Standards
• Manufactured According to EN 12413
The Faithfull Diamond Wheel Dresser has a high quality T-bar with a multi-point, large 36G diamond surface. Ideal for obtaining a true flat surface on your grinding wheels. The knurled metal handle gives a positive grip when in use Specification: Face Size: 45 x 12mmLength: 115mm
Ideal for angle grinders, the Kronenflex A 60 Extra offers high-speed operation and extended service life. Optimised for stainless steel and metal, its aluminium oxide abrasive ensures toughness. The thin design reduces thermal load, ensuring optimal cutting results. Professionals and DIYers benefit from swift, efficient performance with light pressure.<CRLF><CRLF>Features and Benefits<CRLF>• Ultra-thin 1.0 mm profile<CRLF>• High-speed operation<CRLF>• Extended service life<CRLF>• Optimised for stainless steel and metal<CRLF>• Aluminium oxide abrasive for toughness<CRLF>• Reduced thermal load for optimal cutting<CRLF>• Swift, efficient performance with light pressure<CRLF><CRLF>Standards<CRLF>• EN 12413
Type 5 straight wheels for off-hand grinding.
Recessed One Side.
Recess dimensions: 105 x 13mm.
Size: 180 x 25 x 31.75PB mm
Manufactured to assure optimal operator safety and class-leading performance.
Features and Benefits
• Highly durable Aluminium Oxide abrasive material
Typical Applications
• Grade A30 - For general-purpose use on metals.
• For use on steel, tank construction and fabrication, welding seams
• For use with all appropriate handheld angle grinders
X-LOCK 2-piece changing system to switch angle grinder accessories with just one click. The X-shaped interface of the grinders head and the accessory allows easy and effortless mounting. <CRLF>Features and Benefits:<CRLF>■ Convenient X-Lock locking system for quick and safe changes.<CRLF>■ Manufactured for high stock removal an long life<CRLF>■ For use with Ferrous and non ferrous metals<CRLF>■ Resinoid reinforced web for added strength<CRLF><CRLF><CRLF>Typical Applications:<CRLF>Used across a broad range of industries including Automotive, Foundry, Fabrication, Aerospace and Construction<CRLF><CRLF>Recommended Grinding Angle 25 to 35°<CRLF>Not to be used for wet cutting<CRLF>For use with all appropriate handheld angle grinders
Made up of sharp aluminium grains, these discs offer a longer life and higher material removal rates making them ideal for a number of industrial applications. Thin discs for quick efficient cutting with minimum material removal and machine wear.
Features and Benefits
• For use on steel and stainless steel, steel cables, thin metal sheets, thin walled pipes, vehicle bodies, welding and fabrication
• For use with all appropriate handheld angle grinders
Notes
• Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°
The 3M™ Silver Cut-off disc is designed to deliver an unbeatable combination of performance and value. Powered by 3M Precision-Shaped Grain, these products are perfect for a wide variety of metalworking applications such as weld removal, beveling, edge chamfering and more - offering a longer life and a faster cut than aluminum oxide, alumina zirconia and other conventional ceramic abrasives.
Features and Benefits
• Designed to quickly cut through metal pipes, tubes flat sheets and more
• Exceptional durability extends the life of the wheel for great performance value
• 3M Precision-Shaped Grain cuts exceptionally fast, helping increase productivity
• May be used on a variety of substrates such as carbon steel and stainless steel
Notes
Images of products are for representation purposes only. Whilst every care is taken to provide accurate images of products, actual products may differ slightly.
This range of high performance cutting discs utilise premium aluminium oxide alongside an advanced bonding system to produce an extremely long lasting product with consistently fast cutting. The superior bonding system ensures lasting durability, resulting in reduced wheel erosion over time. The grain consistently provides high stock removal on all types of hard steel and alloys.<CRLF><CRLF>Features and Benefits<CRLF>• Quick and clean cutting<CRLF>• Easy to use<CRLF>• High performance abrasive grain<CRLF>• Long product lifespan<CRLF><CRLF>Typical Applications<CRLF>• Industrial use<CRLF>• Steel<CRLF>• All types of alloy
X-LOCK 2-piece changing system to switch angle grinder accessories with just one click. The X-shaped interface of the grinders head and the accessory allows easy and effortless mounting. <CRLF>Features and Benefits:<CRLF>■ Convenient X-Lock locking system for quick and safe changes.<CRLF>■ Manufactured for use with stainless steel (iron, chlorine and sulphur-free)<CRLF>■ Fast and clean cuts without burr formation or blue discoloration<CRLF>■ Quick efficient cutting with minimum material removal and machine wear<CRLF>■ Achieve straight and accurate cuts<CRLF><CRLF>Typical Applications:<CRLF>Used across a broad range of industries including Automotive, Foundry, Fabrication, Aerospace and Construction<CRLF><CRLF>Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°.<CRLF><CRLF>For use with all appropriate handheld angle grinders<CRLF><CRLF>Not to be used for wet cutting
The Faithfull Inox Cutting Disc enables a quick, very clean cut with minimal effort. Ideal for precise, vibration-free metal cutting. Manufactured from aluminium oxide abrasive grit with fibreglass reinforcing, resin bonded to provide both safety and optimum cutting performance. This construction enables higher cutting speed, low material loss and low noise. Applications include: car bodywork, tank construction, steel cable, thin-walled profile sections and pipes made from stainless steel, non-ferrous metals and composite materials. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work
Faithfull single point diamond grinding wheel dresser that can be used to accurately shape and clean the cutting face of vitrified bench grinder wheels. When used regularly, this tool will maintain the cutting surface of a grinding wheel, helping to ensure that precision cutting tools are honed and sharpened correctly for optimum performance. The dresser is manufactured from a hardened and tempered polished steel handle and fitted with a diamond tip. Regular truing and dressing of vitrified grinding wheels removes worn abrasives and waste materials that have become embedded into the grinding wheel. This restores the cutting face for optimum performance and helps to minimise vibration. Single point diamond dressing tools are suitable for use on most surface, cylindrical and internal grinding applications.
These extra thin cutting discs are ideal for slicing through metal and inox Phoenix discs have been developed for precision cutting sheet metal and with strengthened core stability for reduced vibration. The Phoenix extra thin discs do not contain iron, sulphur or chlorine so are suitable for stainless steel cutting applications. Features: ISO 9001 Produced to O.S.A. Safety standards Extremely fast and precise cutting with minimal effort required Applications: Stainless steel, Sheet metal, Mild steel, High-grade steel Allows fast and efficient cutting on stainless steel and mild steel, steel sheets or steel bars on new or rusty surfaces Specification: Pack of 10 Max RPM: 13,300 Size: 115 x 22 x 1mm
Manufactured to assure the operator safety and optimum performance.
For use with all portable angle grinders.
Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders.
Features and Benefits
• Highly effective aluminum oxide abrasive - cuts faster for longer
• Multiple disc sizes available, to suit any need
• Ultra-strong reinforced resinoid bond provides strength and operator peace of mind
Material Applications
• Steel
Standards
• EN12413
Notes
• Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°
• Not to be used for wet cutting
Cubitron™ II Flexible Grinding Wheel is designed to help you grind, shape and sand as fast as possible on a variety of metal materials. 3M Precision Shaped Grain that cuts fast and cool, while still offering enhanced flexibility. This can help achieve a smoother finish with an exceptionally fast-cutting and long-lasting disc
Features ang Benefits:
■ 3M™ Precision Shaped Grain offers excellent cut rate and enhanced flexibility vs
a standard depressed centre grinding wheels
■ Resin bond helps retain strength and performance under grinding operations
■ Significant reduction in vibration compared to a conventional bonded disc
Typical Application:
■ Ideal for grinding, scale removal, curved edges, blending, beveling, deburring and more.
Type 27 wheels have a depressed centre and are used for grinding. They should always be used with an appropriate guard.
This aluminium oxide cutting wheel provides straight, efficient cutting throughout its long lifespan. It is a general purpose abrasive, suitable for all petrol saw and chop saw applications. The mold to shape design of the wheel ensures less vibration during extended use, resulting in increased comfort for the operator.
Features and Benefits
• Straight, fast cutting
• Durable for a long product lifespan
• Mold to shape design results in less vibration
Typical Applications
• Ideal for all petrol saw and chop saw applications
Standards
• oSa / EN 12413 certified
The Faithfull Multi-Cut Cutting Discs will cut a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern-day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC. These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safekeeping.
EDGE Kronenflex cutting discs provide high performance with a self-sharpening abrasive grain to increase the life of the disc and offer sharp cuts time after time. The long service life of the discs allows for cost savings due to replacement intervals. Available in a range of common industrial sizes.<CRLF><CRLF>Features and Benefits<CRLF>• 1.2mm thin discs offer clean cuts<CRLF>• These discs offer fast cutting times to save time during application<CRLF>• Self-sharpening abrasive grain keeps discs sharper for longer and increases disc life to save costs<CRLF>• Available in a range of common industrial sizes to ensure compatibility<CRLF><CRLF>Typical Applications<CRLF>• Steel<CRLF>• Stainless steel<CRLF>• Aluminium
DEWALT DT20592 Bonded Abrasive Cutting Disc with aluminium oxide grain. For cutting, grinding, and finishing in inox and metal. Specially design for use with the DEWALT DCS438E2T XR BL Cut Off Tool (DEWDCS438E2T) Pack of 3.
Norton provide a range of cutting and grinding wheels which are designed for industrial use, with Vulcan setting a performance benchmark. Suitable for steel, stainless steel, cast iron and stone applications, the Norton Vulcan cutting discs offer a versatile solution. This range offers reliability and efficiency, facilitating precise cutting and grinding operations while ensuring extended wheel life.
Features & Benefits
• Delivers precise cuts with long-lasting durability
• Utilizing advanced grain technologies like aluminium oxide, zirconium, and silicon carbide, Vulcan wheels deliver high value with their excellent performance-to-price ratio.
• Ensure safety and security when cutting metal and inox with reinforced construction
Typical Applications
• NOR2308706C for use with petrol saw
• NOR2308706C for use with gas saw
• NOR2308706D for use with chop saw
Norton Super Bleue 5 ultra-thin discs take the cutting performance to a new level of comfort and efficiency, providing a fast, clean cut and longer disc life.
Features and Benefits
• High performance grains for ultimate precision, speed and accuracy
• Upgraded quality versus Super Bleue 4
• Quick cutting with improved operator comfort
Typical Applications
• Cutting
