Find Nail Pullers, Wrecking and Pry Bars Products
The rolling head design is ideally suited for use in confined spaces, ground points used by steel erectors and scaffolders for aligning bolt or rivet holes.
3 piece set contains:
1x 150mm.
1x 300mm.
1x 450mm.
With curved blade to provide greater leverage, these pry bars are suitable for a wide range of general duty applications within the packing, automotive, maintenance and assembly industries. Made from square section chrome vanadium with ground points paired with impact-resistant plastic handles that offer a more comfortable and secure grip to make these pry bars user-friendly. Handles are also oil and acid-resistant. Available in three varying lengths.
Features and Benefits
• Available in three sizes to suit your requirements
• Impact resistant plastic handles provide the user with bolstered comfort and grip
• Curved blade provide superior leverage to straight blades
• Blade is manufactured from chrome vanadium steel for overall durability
Typical Applications
• Automotive
• Repair and Maintenance
• Packing and Picking
The Roughneck Aligning Bars are made from drop-forged alloy steel, hardened and tempered and with a hexagonal shank and polished tips. Ideal for aligning bolt holes during steel construction.
The Roughneck Gorilla Bar® has a low profile claw which fits further under the workpiece for increased prying power, and the wider claw surface offers better control whilst resisting sinking into the support surface. Made from drop-forged alloy steel hardened and tempered, with polished tips, and oval shaped for better control and strength.
Roughneck Traditional Wrecking Bar with polished tips, hexagonal shank and built-in nail remover. Made from drop-forged alloy steel that has been hardened and tempered for increased durability. Ideal for general wrecking and demolition work.
These multi-purpose tools can be used as a nail lifter, pry bar, adze or lever. Manufactured from heat treated carbon steel, the product is ideal for dismantling timber constructions, opening packing cases and removing nails. Available in two sizes to suit your needs.
Features and Benefits
• Manufactured from heat treated carbon steel for durability
• Available in two sizes to suit your requirements
• Multi-purpose tool that has a wide range of applications such as a nail lifter, pry bar, adze or lever
Typical Applications
• Construction
• Warehousing
• Automotive
Suited for general dismantling and stripping applications, within a wide range of industries. Manufactured from heat treated carbon steel, one end is bent upwards whilst the other has a light slant, making it a highly versatile product.
Features and Benefits
• Has a bevelled nail slot to allow you to easily remove nails
• Manufactured from carbon steel for durability
• Heat treated for resistance to corrosion and bolstered strength
• available in varying sizes to suit a host of needs
Typical Applications
• Ideal for dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar)
Faithfull Digging Bar is manufactured from high grade heat treated steel bar with a hexagonal shank. It has a pencil point at one end and a 50mm (2in) flat chisel edge at the other. Used for breaking rock or concrete and for levering heavy objects.
A light, multi-purpose flat bar made from steel. Suitable for light-weight construction or for use in edge protection applications.
PRODUCT FEATURES
Steel flat bar
2mm thick
Strong and durable
Easy to cut
Suitable for light construction and DIY projects
The Faithfull Mechanics Pry Bar Set contains three sizes of bar to help pry, lift, position and align machinery and parts into place. Each bar has a heavy-duty square shaft with an angled tip design to provide an extra leverage point when working in narrow or confined spaces and feature a sharpened chisel tip that can be easily slid into tight spaces to separate parts. The large PVC handles provide a positive grip to help protect and keep your hands comfortable when applying a high leverage. These pry bars are useful for many small dismantling applications.
Perfect for the swift removal of skirting boards, mouldings and flooring with ease and minimal damage. Durable high quality 3mm thick steel for maximum strength. Uses include trim puller, pry bar, nail puller, bottle opener, spanner and plasterboard remover. Wide 15° bevelled edge allows puller to easily separate plasterboard or skirting from the wall without any damage to materials being removed. Soft grip handle reduces hand fatigue and minimises vibration from impact when driving the tool between skirting and wall.
• Perfect for the swift removal of skirting boards, mouldings and flooring with ease and minimal damage.
• Durable high quality 3mm thick steel for maximum strength.
• Uses include trim puller, pry bar, nail puller, bottle opener, spanner and plasterboard remover.
• Wide 15° bevelled edge allows puller to easily separate plasterboard or skirting from the wall without any damage to materials being removed.
• Soft grip handle reduces hand fatigue and minimises vibration from impact when driving the tool between skirting and wall.
• Model No. TP001
The Roughneck Gorilla Pro-Grip Utility Bar is expertly crafted using drop forged alloy steel that has undergone heat treatment. This ensures remarkable toughness and long-lasting durability. Its I-beam profile provides enhanced strength. The distinctive high-grip design ensures absolute control while in use. Moreover, its powder coated finish offers superior resistance against corrosion. Equipped with 3 x bevelled nail removers, it excels at prying out embedded nails.
Specification: Length: 376mm (15in) .
Expert Quality, manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. Specially designed chrome molybdenum hinged joint head for extra torque. Spring - loaded ball bearing for secure socket holding.|Manufactured and tested generally in accordance with DIN3122 and ISO3315 Specifications
Heavy-duty, angled shafts, manufactured from Chrome Molybdenum steel with blackened finish. Each fitted with textured comfort grip handle and hammer cap.
Faithfull Trammel Heads are used to draw circles and measure sizable distances with the accuracy of a divider. Also for layout, marking templates and drawing large circles. The trammel heads clamp on to any wood or metal bar up to 31mm wide. They feature needle point legs and one trammel can also hold a pencil.
The Faithfull Tuff Bar can be used as a wrecking bar, nail puller and utility or ripping bar. With a low profile, wide, flattened claw fits further under the workpiece for increased prying power and it resists sinking into the support surface. Forged from high quality carbon steel.
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.
41378
Ideal for heavy duty building site work i.e. demolition, dismantling timber work etc. Forged carbon steel chemically blacked with chisel end and swan neck.
Nail Puller 228mm (9in)
The Estwing Nail Puller is made of fine tool steel, drop forged and tempered for extra durability. Both nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. The head is slightly rounded to give you improved leverage and the precision thin claw design enables you to get into hard to reach places.
Spring steel for strength and durability.
Precision ground edge for better penetration.
Wider prying edge for better leverage.
Flat striking face for demolition work and impact with hammer.
Low weight for ease of use.
High quality flat and hex steel bars with chisel, swan neck, pointed and cranked ends. Ideal for all forms of force work, including opening packing cases, removing nails and aligning heavy equipment.
The Roughneck Double Ended Nail Puller is manufactured from drop-forged alloy steel, hardened and tempered with a hexagonal shank. With a black painted finish and an integral nail puller to aid the removal of embedded nails.
The Roughneck® Gorilla Claw Bar is ideal for removing embedded nails and light prying. The head features a striking face allowing the bevelled jaws to be punched deep into the material to pry out embedded nails. Drop-forged hardened and tempered steel construction for extreme strength and durability. It also has polished tips and 3 x nail removers.
The Roughneck Gorilla Bar Pro™ is an extremely high-quality tool designed for discerning users who are looking for a lightweight, yet very strong wrecking bar to avoid fatigue during use and uncompromising performance. These bars are made from chrome vanadium steel, drop forged and the entire lengths are hardened and tempered to give extra strength. Their superior quality and durability means they will withstand extreme loads without deforming or breaking. The top of the bars and both ends are polished. The wide jaw prevents damage or marks on the support area.
The Roughneck Wrist Tool Lanyard has a wide elasticated cuff for security and comfort. The all-metal, heavy-duty snap-hook at the end of the webbing loop enables trouble-free attachment to the secure welded D-hook on either the wrist or tool lanyard. Its loop end with dual-channel barrel lock ensures tools are securely fastened. Designed to prevent accidents due to falling tools from height, tool lanyards also safeguard against the loss of equipment. Specification Overall Length 350mm (13.75in) Max. Tool Weight 1.36kg (3 lb) Webbing Loop Diameter 250mm (10in)
88636
Expert quality, chemically blacked finish blades with striking caps and impact-resistant soft grip handles.
Ideal for heavy duty building site work i.e. demolition, dismantling timber work etc. Forged carbon steel chemically blacked with chisel end and swan neck.
Solid forged, hardened and tempered from oval steel. Powder-coated with ground claw and chisel. For heavy duty wrecking and demolition work. Angled chisel end for leverage and claw with integrated nail puller.
The Blue Spot Tools 900mm Pound Through Pry Bar is manufactured from heat treated alloy steel for durability, with a 26mm wide head which is angled to make any prying easy. The 16mm satin finished shaft goes all the way though the handle enabling the user to use a hammer to get into stubborn areas. The bar is finished off with a soft grip handle which aids with user comfort.
900mm for extra leverage
Angled head to make any prying task easy
26mm wide head
Shaft goes all the way though the handle
Soft grip handle which aids with user comfort
The Estwing EPB/18 Pry Bar is lightweight with an incredibly strong, forged I beam construction. With bevelled nail slots and a rocking head to provide maximum leverage. Ideal for carpenters, mechanics and general use.
The XTrade X0900163 Wrecking Bar is engineered to deliver superior performance, making it an essential companion for heavy-duty demolition. Empowering your demolition projects, it is an essential tool for all builders, carpenters and plumbers seeking efficiency and precision in a variety of tasks. Trust XTrade for quality craftsmanship and redefine your demolition experience.
Features:
Optimal Length: The XTrade 18" Wrecking Bar is optimally sized for versatile use, providing the perfect balance between manoeuvrability and leverage
Robust Construction: Crafted with robust materials, heat treated and hardened carton steel, this wrecking bar is built to withstand the toughest demands of demolition. Features a hexagonal shaft for optimal strength and durability
Precision Demolition: The wrecking bar's design allows for precision in demolition tasks, offering controlled leverage for efficient dismantling of structures and materials
Versatile Applications: Ideal for a range of applications, including prying, pulling, lifting, and demolishing, this wrecking bar is a versatile tool for various construction projects
Dynamic Duo: Features a hardened and tempered claw and chisel at either end, perfect removing tough nails and any levering actions when prying or demolishing
Durable Finish: Black powder coated finish, protecting it from corrosion and maintaining its appeal even after prolonged use
Specification:
Part Number: X0900163
Length: 600mm/24"
Weight: 0.5kg
These traditional designed rolling head pry bars are ideal for use by tradesmen in any industrial environment. Suitable for use in confined spaces and manufactured from forged carbon heat-treated steel with ground points, the product is available in three varying sizes to suit any applications.
Features and Benefits
• Ground points hold a precise edge even with extended use
• Manufactured from carbon steel for durability
• Available in three varying sizes to suit your needs
• Slimline design allows the product to be used even in confined spaces
Typical Applications
• Opening crates
• Aligning holes
• Pulling seals
• Engineering
With one angled blade end and one ground to a point, these line type pry bars are ideal for use by a tradesperson in any industrial environment. Manufactured from forged carbon heat treated steel with ground points, the product is available in two sizes to suit your needs.
Features and Benefits
• Angled blade provides greater leverage requiring less effort on the part of the user
• Manufactured from forged carbon heat-treated steel for durability and product longevity
• Available in two sizes to suit your requirements
• Also features a singular, ground pointed end for a variety of applications
Typical Applications
• Engineering
• DIY
• Construction
These hexagonal plastic protector sleeves are a simple yet effective way of protecting users from injury when using a cold chisel and hammer. The contoured, high impact resistant plastic grips redirect the force of miss-hits safely away from your hands, thus preventing injury. Suitable for use with octagonal cold chisels, the product can be purchased to fit different sized cold chisels (chisels sold separately).
Features and Benefits
• Grips redirects the force of miss-hits safely away from your hands preventing injury
• Suitable for use with octagonal cold chisels
• Sleeve is manufactured from high impact plastic for durability
• Available in various sizes to sit different blade widths
Typical Applications
• Construction
• Joinery
• Carpentry
For general duty usage, these pry bars are a regularly used tool in the packing, automotive, maintenance and assembly industries. Made from square section chrome vanadium steel with ground points, each product also boasts an impact resistant plastic handle that is oil and acid resistant. Available in a range of sizes.
Features and Benefits
• Straight blade is suited for multi-purpose use
• Made from square section forged steel for maximum durability
• Impact resistant handle bolsters user comfort and grip
• Handle is also oil and acid resistant making for a robust product
Typical Applications
• Automotive
• Maintenance
• Warehousing
Manufactured from drop-forged, 16mm heat treated steel. Includes chisel end and swan neck. Ideal for all forms of force work, including opening packing cases, removing nails and taking apart wooden constructions.
Hardened and tempered 16mm diameter high grade steel with a blackened finish for resistance to corrosion. Fitted with textured rubberised comfort grip handle.
The Faithfull nail puller is the perfect tool for removing nails from most materials, lifting floorboards, opening wooden crates and dismantling wooden structures. This specialist tool can even extract nail heads recessed below surface level and features a malleable cast iron slide handle with a hinged, drop-forged gripping jaw fixed to a box joint for extra strength. The tool is used by positioning the jaws on either side of the nail head before slamming down the slide handle to drive the jaws into the timber and under the nail head. The handle is then levered forwards using the base heel as a leverage point to keep the jaws tight whilst extracting the nail. 60cm - 24-Inch
Roughneck Utility Bars are manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder-coated finish with polished tips and an integral nail puller to remove embedded nails.
DURABLE: This 60m (24") wrecking bar is made from strong drop forged steel for durability. VERSATILE: With chisel and swan neck ends, this utility bar is ideal for dismantling timber work, opening wooden cases and removing nails.
Multifunctional tools used mainly for prising and levering, drawing large nails and demolition work, ideal for any general dismantling and stripping applications. The versatile Super lever type can be used as a light duty nail lifter, pry bar, adze or lever
Drop-forged, heat treated steel shafts with blackened finish. Tapered shaft suitable for lining up components prior to assembly. Heel design maximizes leverage. Also useful for fine positioning of heavy machinery.
The Faithfull fully insulated crow bar is made to BS8020 standards. With a pencil point at one end and a flat chisel edge at the other. The insulated shaft is manufactured using a solid fibreglass core which is coated with an abrasive resistant orange polymer coating. These insulated tools conform to BS80202002 for working on or near live cables. They are individually tested to 10,000 volts, and guaranteed to 1,000 volts.
Scutch combs are designed to fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. These Roughneck Scutch Combs are made from strong carbon steel, which is zinc coated for increased resistance to corrosion. They are contractor grade and come with a lifetime guarantee. Size 25mm (1 inch). Pack of 5
These crowbars are designed for use in areas where live electricity is present and provide protection against the risk of hidden electrical cables. All special tools are manufactured as per BS8020:2011 standards.
Features and Benefits
• Designed for use in areas with live electricity
• Cable protection provides a safeguard against hidden electrical cables
• Manufactured as per BS8020:2011 standards for quality assurance
For general duty prising and levering. The curved blade will provide greater leverage.
Set contains:
1x 300mm straight.
1x 300mm curved.
1x 450mm curved.
Designed for prying, positioning, and aligning applications, this 18in. pry bar can be used across multiple industries. The product has a black oxide finish to bolster product longevity.
Features and Benefits
• Can be used for prying, positioning, and aligning applications.
• Black oxide finish prevents corrosion to prolong tool life
Typical Applications
• Warehousing
• Construction
• Automotive
Clever design features 180º adjustable head. Simply push button to adjust head, then release to lock into position. Ideal for use in spaces with limited access. Curved head also allows for delicate use. Ideal for prising stubborn cylinder heads from engine blocks.
This Bahco Pry Bar features both a crowfoot and precise end, both of which are useful for demolition work. Its short length makes it ideal for use in tight spaces. The bright orange finish is easy to spot on site.
The Faithfull Pry Bar/Nail Lifter has been manufactured from high quality carbon steel and has a 90º angle head for rapid nail removal. It has a small profile for removal of nails in confined spaces, and a wide, flat claw provides a firm base to prevent sideways movement. Designed for pulling nails, prying, and general dismantling of timber constructions.
The Knipex 51 01 210 Hammerhead Style Carpentersrsquo; Pincers are a heavy-duty nail puller with striking face for driving in nails. These Nail puller are manufactured from special tool steel, are oil hardened and tempered for added strength and durability, with polished head and PVC plastic coated handles for added grip and comfort. Length. 210mm (8 1/4 in).
The Roughneck Roofing Gorilla Bar features a double injection moulded soft-grip handle. Manufactured from drop forged, heat treated alloy steel for exceptional strength and durability. Wide low profile jaws and a flattened striking face allows for the bar to be driven deeper underneath the work piece for more effective prying. Powder coated finish offers greater resistance to corrosion. With bevelled nail removers for prying embedded nails.
The Roughneck Heavy-Duty Pull Bar is a very well designed and strong tool it has a large flange to rest against the panel and a striking face protected by a nylon cap. Underneath is fully covered by soft felt to protect wood surfaces from scratches, scuffs or other damage. Bevelled end tip to allow prying for either lifting panels or pulling the last row tighter together.
This Roughneck Pinch Point Crowbar has a drop forged steel construction with heat treated working areas, and a black finish with polished tips. They have a pinch point for easier penetration, lifting, digging, breaking, wrecking etc.
The Roughneck 64-961 5 Piece Bar Set contains the following; 2 x Utility Bars manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder-coated finish with polished tips and an integral nail puller to remove embedded nails. Sizes: 1 x 175mm (7in) and 1 x 380mm (15in). 2 x Wrecking Bars made from drop-forged alloy steel, hardened and tempered, with polished tips and hexagonal shank. The 380mm (15in) bar has an upgraded 5/8in diameter. Sizes: 1 x 300mm (12in) and 1 x 380mm (15in). 1 x Gorilla Bar Junior with a low profile claw that fits further under the workpiece for increased prying power. The wider claw surface offers better control and resists sinking into the support surface. Made from drop-forged alloy steel, hardened and tempered, with polished tips and oval shaped for better control and strength. Size: 356mm (14in).
The Stanley Precision Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws allow for precision nail pulling and prying and the contoured bar makes pulling, prying and lifting easier. They are ideal for heavy-duty demolition work. 1 x Stanley Precision Pry Bar Claw 250mm (10in)
Pry Bars are used extensively in the automotive trade for leverage and aligning, particularly on brake assemblies. Manufactured from forged alloy steel and powder coated to resist rusting.
The Faithfull Utility Bar is manufactured from high-quality alloy steel and is powder-coated to ensure maximum resistance to rusting. The flat bar with bevelled ends is designed for such tasks as opening boxes, crates and manhole covers. It is ideal for removing nails and prying lightweight doors and windows, as well as a multitude of other light levering applications. Makes a useful addition to the tool kits of most professionals and some handymen. This versatile tool enables a wide range of light-duty work to be performed in and around the workplace or home.
The Fiskars IsoCore Demolition Tool with patented, industry-leading IsoCore Shock Control System, absorbs strike shock and vibration. Reducing the punishment your body takes, and a dual-layer handle captures any lingering vibration. Its striking & struck face allows you to position the pry and hit it to target while the demo edge maximises the striking force. The performance handle design fits your hand securely and comfortably. Strategic handle texturing helps improve grip while reducing blisters. It also features a pronounced handle flare for security. Ideal for bending and straightening boards, striking, pounding, chiselling, prying to remove tiles & removing nails, even in tight spaces.
This Priory 150 Nail Puller is ideal for opening packing cases, timber reclamation, removing floorboards and general carpentry. It will easily remove almost every type of nail even if it is sunk below the surface, use the integral slide hammer to sink the jaws in around the nail. The heat-treated alloy steel jaws act in the same way as a pair of pincers while the long handle gives excellent leverage. Specifications Length 485mm (19in). Weight 1.6kg.
Versatile, easy-to-use nail puller. Despite its small size, it can easily pull out a 5 in nail, even when the head of the nail is off or buried deep in the wood. Made of red lacquered hardened steel.
DURABLE: This 380mm (15'') pry bar is made from strong, drop forged and heat treated steel for durability. VERSATILE: With a wide blade for easy prying, it can be used as both a nail pry bar and puller.
The BlueSpot 1/2" Power Bar Replacement Head is drop forged from heat treated chrome vanadium with a blackened phosphate coating to protect against corrosion. Contains replacement head and fixing screw.
*This item is not covered under the terms of our lifetime guarantee
Wrecking Bar
For general dismantling and stripping applications. V-notch for use on nails.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
Drop-forged steel shaft with corrosion resistant finish. Hand-ground heel and face. Tapered shaft.
Manufactured from drop-forged, heat treated carbon steel. Features 30 and 90 degree offset claws with sharpened tips. Ideal for all forms of leverage, including opening packing cases, removing nails and taking apart wooden constructions.
Heavy-duty hardened and tempered Chrome Vanadium steel with blackened finish. Quick release locking mechanism retains extension at set increments giving 27 different shaft lengths from 600-915mm. Features 180° adjustable head, simply push button to adjust then release to lock into position. Ideal for commercial and agricultural use.
Manufactured from Beryllium Copper. Die-cast. Cranked tips suitable for lining up components prior to assembly.
Introducing the Point 600mm - 1-1/4" Hex product range by Sealey, designed for professionals and DIY enthusiasts alike. This range offers exceptional durability and reliability, making it an essential addition to any toolkit. Crafted with high-quality materials, these tools are engineered to withstand rigorous use while providing optimal performance. The 620mm length ensures enhanced leverage and accessibility, allowing users to tackle a variety of tasks with ease. Experience the perfect blend of strength and functionality, ideal for both automotive and general maintenance applications.
Features:
Length: 620mm
Applications:
- Ideal for loosening or tightening stubborn fasteners in automotive repair and maintenance due to its 620mm length providing extra leverage.
- Suitable for use in construction and assembly tasks where a 1-1/4" hex socket is required, ensuring compatibility with a wide range of bolts and nuts.
Faithfull Digging Bar manufactured from high grade heat treated steel bar with a hexagonal shank. It has one diamond point and one bent chisel point (2in). The bent chisel, or slate bar, can be used for breaking rocks or as a lever for moving heavy objects.
Faithfull Slaters Ripper for sliding under slates to pull out or sheer off fixing nails prior to replacing with new slates. Features a flexible steel blade with PVC grip.
The Hultafors 109 TD Wrecking Bar is made from hardened, high quality steel. Wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. The claw and chisel are optimised for pulling out nails.
Suitable for measuring angles or transferring angles from a point of measurement to a work-piece. Made of anodised aluminium for improved durability against corrosion. Alpha x read on the left side of the scale, Beta x on the right and can also be used to read angles between 20 and 160.
The Rentokil Slug amp; Snail Barrier Tape is a non-toxic, adhesive copper tape to protect plants from slugs and snails. It is ideal for pots, tubs and troughs. Poison free and safe to use around children and pets. Copper tape is used to keep slugs and snails out of certain areas in gardens, potted plants, tree trunks (fruit trees) and other shrubs and plants that Slugs and Snails like. How to use: Peel back the white backing and then stick to the plant pot / tree (removing loose dirt first) Length: 4 metres. 4 Metre Roll will do around 10 x 12.5in plant pots.
The Roughneck Automotive Bar Set contains one rolling head with a round shank and one aligning bar with a hexagonal shank. Both bars are made from one piece of heat-treated steel. They have a black finish with polished double ends. Bevelled edge for easy use. Applications include automotive, construction, prying, lifting and aligning.