10 tonne capacity grease filled hydraulic ram with spring loaded plunger. Provides direct non-twisting application of thrust that is more effective and secure than a mechanical thrust screw. Fully threaded body allows for quick and easy height adjustment. With tommy bar.
Fits most brands of pullers and ball joint separators including Kennedy, Sykes-Pickavant, Sealey, Draper, Bergen, Clarke etc.
Capacity: 10 tonne.
Length excluding handle: 190mm.
Diameter of ram: 40mm.
Thread pitch: 16 gauge x 3/8 BSW
09311500 - Main Pulling Rod 254mm long (1/2" x 16BSF)
Weight - 0.55
Dim 1 - 290
Dim 2 - 110
Dim 3 - 20
To suit the Kennedy 10 Ton Hydraulic Ram (KEN-503-7200K). N.B. Hydraulic Ram not included.
Can be used in any SP Hub Puller in place of Hydraulic Ram or Slide Hammer (11/2” BSW thread) When used together, Shock handle (08251900) and Impact Force Screw (12731100) can convert 1500 series hydraulic rams to mechanical. In addition the impact shock handle to screw has a sliding centre spindle which allows the operator to strike the end when fully loaded. This assists the release of stubborn joints or taper fits.
The jaws are manufactured from drop-forged steel with independent leaf springs for positive location. Suitable for the rapid removal of small bearings. Spread: 19 - 45mm.Reach: 73mm.
This 1/2in. female to M8 male converter is a useful consumable part for mechanical pullers and kits.
Features and Benefits
• Versatile component can be used on puller legs and when forcing screws when pulling
Typical Applications
• Fitting smaller split collet extractors (between 6.5mm to 30mm)
HS7 105 - 150mm
HS11 75 - 105mm
For removing bearings, gears, sprockets and bushes.
10 ton capacity hydraulic ram with tommy bar. Metal storage case.
Both sets contain:
1x hydraulic ram.
1x separator.
2x 200mm main rods.
2x 230mm extension rods.
1x beam.
1x ram nut.
HS7 (only) also contains
1x 80mm push plate.
1x 50mm ram
extension.
1 x 100mm ram
extension.
HS7 Set Illustrated
Manufactured from forged alloy steel. Taper jaws allow the separator to be used where access behind the component is too restricted to use normal pullers.
Combination pack consisting of a medium duty hydraulic thin jaw puller and bearing separator.Supplied in carton.External Spread Min - Max: 50 - 105mmExternal Reach Max: 876mmContents:08611400 2 x Legs 150mm - Thin Jaw19311200 1 x Twin Beam09510000 1 x Separator 20-105mm09311500 2 x Main Rods09311900 4 x Extension Rods09312300 2 x Extension Rods 5 inch
Updated unit now provides greater powerAllows easier operation - 50% more capable using the SP 12 tonne Hydraulic RamIncludes adaptor ring for use with 08780000 Universal Press & Pull Sleeve KitCan be used in the following formats:- On its own as a stand alone tool- With Universal Press & Pull sleeve kitsOpen frame design - 200mm of clearance through the press frameIdeal for use with individual model specific press piece sets
Universal Press FrameCan be used with 8 or 12 Tonne SP hydraulic ram and press frame pressure screwAlso available withadaptor ring as part number 18700100
Mounts between original top arm and jaw attachment Use to extend the length of the top spring mounting jaw position Can be used singlyto provide 10mmextension or as apair for 2 x 10mm extension For use with the range of suspension workstations (38480000, 38580000, 38680000)
Hydraulic 1500 series Makes 8 different twin/triple leg pullers, plus bearing separator kit. Supplied in metal case.Puller Spread Min - Max: 50-250mmPuller Reach Max: 200mmExternal Spread Min - Max: 20-105mmExternal Reach Max: 876mmContents:15000000 1 x Hydraulic Ram With Nose Piece15241200 1 x Twin Head15341300 1 x Triple Head15242200 1 x Ram Extension - 50mm15262400 1 x Ram Extension - 100mm15272600 1 Ram Extension - 150mm15242400 3 x Legs - 100mm15262600 3 x Legs - 150mm15282800 3 x Legs - 200mm15292900 3 x Legs - 250mm (Extra Wide)19311200 1 x Twin Beam09510000 1 x Separator 20-105mm09311500 2 x Main Rods09311900 4 x Extension Rods09312300 2 x Extension Rods 5 inch
Includes adaptor ring (18780400) for use with 08780000 and related press piece sets Can also be used with 8 or 12 Tonne SP hydraulic ram and press frame pressure screw Also available without adaptor ring as part number 18700170
Hydraulic 1500 series Removes gears, bearings, pulleys and sprockets. Wide range of automotive and industrial applications. Powered by 1500 series hydraulic ram. Safe and easy to use. 8 tonnes of force with minimum effort. Easy to adjust. Non-twisting for improved stability. Supplied with nose piece for use on centred shafts.Makes 4 different hydraulic pullersCombination standard and thin jaw leg pullerPuller Spread Min - Max: 50-150mmPuller Reach Max: 255mmRam Extension: 50 / 100mmContents:15000000 - 1 x Hydraulic Ram with Nose Piece15242200 - 1 x Ram Extension - 50mm15262600 - 2 x Legs 150mm08611400 - 2 x Legs 150mm - Thin Jaw15242400 - 2 x Legs 100mm19311200 - 1 x Twin Beam15262400 - 1 x Ram Extension - 100mm15241200 - 1 x Twin Head Assembly08612800 - 2 x Thin Jaw Extension Set - 75mm
Tool designed for extracting ball joints from axle retainers
Versatile tool suitable for connecting rods, tie rod ends and support joints
Supplied with a 12T hydraulic ram 180000V2
Specification:
39mm Jaw Width
If you already have either the Sykes Pickavant 8T or 12T ram you can purchase the ball joint tool only using 08010000 - Ball Joint Splitter
15241200
Twin Head (with centre nut) 1½" Dia. Internal
Weight - 0.715
Dim 1 - 160
Dim 2 - 100
Dim 3 - 40
Makes 8 different twin / triple leg pullers Supplied with metaldisplay panel (610 x 457mm)Puller Spread Min - Max: 50 - 250mmPuller Reach Max: 250mmRam Extension: 50 / 100 / 150mm15000000 1 x Hydraulic Ram With Nose Piece15241200 1 x Twin Head15341300 1 x Triple Head15242200 1 x Ram Extension - 50mm15262400 1 x Ram Extension - 100mm15272600 1 x Ram Extension - 150mm15242400 3 x Legs - 100mm15262600 3 x Legs - 150mm15282800 3 x Legs - 200mm15292900 3 x Legs - 250mm (Extra Wide)15512800 1 x Metal Panel15512900 1 x Hook Kit
Hydraulic 1500 seriesMakes 3 different twin/triple leg pullers.Supplied in cardboard box.Puller Spread Min - Max: 75 - 150mmPuller Reach Max: 150mmRam Extension: 50 /100mmContents:15000000 1 x Hydraulic Ram With Nose Piece15241200 1 x Twin Head15341300 1 x Triple Head15242200 1 x Ram Extension - 50mm15262400 1 x Ram Extension - 100mm15242400 3 x Leg - 100mm15262600 3 x Leg - 150mm
Expert Quality, six position multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be removed with Minimal effort by use of the hydraulic puller. Supplied with instruction manual. Packed in blow mould carrying case with display sleeve.|1 x Hydraulic pump3 x Puller legs6 x Nuts and washers6 x Link plates1 x 2/3 leg puller yoke1 x Nose adaptor
When used in conjunction with components from 08780000, or 08797500, these kits allow application of up to 12 tons of hydraulic force which can be used to provide a controlled force in place of the manual or mechanical effort required when using 08780000 / 08797500 Contents:- Hollow Ram Hydraulic Cylinder, Alignment washer and 2x extra-long heavy-duty spindles that are rated for use with the hydraulic ram. (Note: Standard 08780000 spindles are not rated for use with the 18782500 and / or 18792500 hydraulic ram) Cylinder: 40mm stroke
Hydraulic 1500 series
Removes gears, bearings, pulleys and sprockets
Wide range of automotive and industrial applications
Powered by 1500 series hydraulic ram
Safe and easy to use
8 tonnes of force with minimum effort
Easy to adjust
Non-twisting for improved stability
Supplied with nose piece for use on centered shafts
Self centering and self locking
Redesigned legs, improving strength
The separator is a versatile tool where a long reach is required to draw a bearing from a shaft.
The tapered edges of the bearing separator provide all round support and can fit behind bearings where normal puller legs cannot gain access.
Makes 10 different twin/triple leg pullers, plus bearing separator kit
Supplied with metal display panel (1000mm x 457mm)
Dimensions:
Puller Spread Min - Max: 50-250mm
Puller Reach Max: 200mm
External Spread Min - Max: 20-105mm
External Reach Max: 876mm
Contents:
1500 Series Hydraulic Ram With Nose Piece
15241200 1 x Twin Head
15341300 1 x Triple Head
15242200 1 x Ram Extension - 50mm
15262400 1 x Ram Extension - 100mm
15272600 1 x Ram Extension - 150mm
15242400 3 x Legs - 100mm
15262600 3 x Legs - 150mm
15282800 3 x Legs - 200mm
15292900 3 x Legs - 250mm (Extra Wide)
19311200 1 x Twin Beam
09510000 1 x Separator 20-105mm
09311500 2 x Main Rods
09311900 4 x Extension Rods
09312300 2 x Extension Rods 5 inch
15542800 1 x Metal Panel
15542900 1 x Hook Kit
Have a simple, grease filled ram instead of the mechanical force screw. This produces more power easily & efficiently. The spring loaded plunger provides direct, non- twisting application of thrust safely.
A new “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 1998 – 2004 & Range Rover P38A 1994 – 2002 Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the car” solution (Inc in 18771100 only) Designed, tested and manufactured in Great Britain Other kit options available - See related products 18771100 and 18771200
Combination twin/triple leg puller kits. Complete with ram extension offer a wide range of pulling options. Suit most applications.
153405:
Spread: 100mm. Reach: 100mm. Extension: 50mm. In promotion box.
155000:
Spread: 150mm. Reach: 150mm. Extension: 50mm.
Contains components to make up 4 different pullers. In metal box.
Part number U42
Specifications - Model U.42B has special-purpose legs for gearbox bearings.
- Spare yoke for U.42 and U.42B : U.42SE2.
Unit Each
Clamp depth (mm) 120
Max. Clamp Width Inner (mm) 85
Min. Clamp Width Inner (mm) 10
Pulling Strength (ton) 1.5
A quick solution to assist the bearing to be pressed out on a wide range of common hubsFor use with press block - 08770000Ideal large void for holding hubs and pressing out wheel bearingsLarge diameter sits across the press allowing for large hubs to be placed on the press ringUseful alternative to V blocks and old bearing casingsDimensions: 160mm (h) x 179mm ()Weight: 7.8kg
Contents 2x Seals 1 x Grease 1 x Installation Instructions
For checking bodywork and structural corrosion. Combined tapping hammer, blunt scraper and short lever. Width 90mm.
Fleetguard® HH6963 filter head is one of multiple inlet and outlet port size options with various by-pass valve settings to meet specific requirements.