With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529.
Tap Wrench Set
Contents:
Square size: 2.8 - 5mm and 4.3 - 14mm.
For designers, toolmakers & Engineers. Now with 38 pages of engineering data. Each page coated with a gloss lamination to protect against the dirt and grease encountered in workshop conditions.
Contents:
• Basic forms of heat treatment - Colour charts for tempering and for hardening & forging.
• Material groups - Colour coded machineability chart and hardness listing.
• Tensile strength and hardness - Shore hardness and equivalent tensile strengths and conversions included.
• Lubricant selection - Colour coded materials chart and dilution guidelines.
• Hole and shaft tolerances - H7-e8 tolerances for counterbores included.
• Metric screw and hole sizes
• Thread notation - Explains terminology used to define thread characteristics.
• Standard thread forms - Sequenced logically, tapping and clearance sizes integrated into single chart and colour highlighted for quick reference. Includes special metric pitches & NPT, distinctions made between 'Rp' and 'G' series BSP. ISO 529 pitch form diagrams shown. Now also lists tapping and clearance drill sizes for fluteless tap.
• Dimensions of common shank types - Now includes screwed shank, Weldon, DIN Taper, BT Taper, ISO Taper in addition to Morse taper shank details.
• Standards for engineering drawings - Comprehensive listing including contemporary listings and illustrations.
• Abbreviations used in engineering drawings
• Common CNC codes - Comprehensive listing including contemporary listings.
• Axis nomenclature for machine tools - Newly added page explaining the use of letter addresses to define directional motion.
• Trigonometry formulae - Colour coded CAD produced illustrations for quick reference.
• Sines and Cosines - Calculated to six decimal places with colour coded axes for quick reference.
• Tangents and Cotangents - Calculated to six decimal places with colour coded axes for quick reference.
• Co-ordinates for equally pitched holes - Clear and easy to read CAD produced diagrams.
• Bending allowances for malleable materials - Listed as metric radius and thickness with nearest equivalent SWG given for guidance. Clear and easy to read CAD produced diagrams.
• Cutting speed calculator - Gives required RPM for known cutter diameters and cutting speeds.
• Standard drill size conversions - No & letter sizes integrated into a single chart, standard sizes are highlighted in bold text, size range extended from 25.25mm up to 32.50mm. All inch-fractional sizes converted to mm equivalent as well as inch-decimal and Morse Taper shank sizes are indicated against drill diameter ranges.
• Abbreviations and formulae - Definitions of standard meanings with specific attention given to turning, milling and drilling. Comprehensive list of commonly used abbreviations.
• Weight and measure systems, useful conversions and constants - A comprehensive listing of contemporary and old systems, along with the necessary conversion formulae.
Bi-metal Fast Cut holesaws combine a brand new tooth material, boasting enhanced durability and a new tooth design that provides a smoother, faster cut on a wide range of materials, when compared against the previous Constant Pitch saw.
Specifically suited to cutting stainless and mild steel sheet, the Fast Cut will also cut through tubes with a wall thickness of up to 3mm (1/8").
Features and Benefits
• New tooth design, providing a smoother, faster cut on almost all materials
• Enhanced heat and wear resistance
• Specifically suited to cutting stainless and mild steel sheet
• Will also cut through tubes with a wall thickness of up to 3mm
Notes
• Images for illustrative purposes only
Series A002 HSS Straight Shank Jobber Drill feature a hardy TiN tip coating for increased tool life and performance with 118° self-centering split point for superb hole quality and positional accuracy. Ideal for use on steel, stainless, cast iron, ceramics, plastics and many other materials. They are available in size range: 1.00mm - 16.00mm and manufactured to BS328: Part 1: 1986, DIN 338 standards. Features and Benefits • Efficient point design for superior cutting action, reduced axial force and accurate centreing • Titanium nitrile (TiN) coating offers low friction and resists wear for faster cutting speeds • All Surfaces are ground for consistent precision • 118° self-centering split point offers excellent hole quality and positional accuracy • Bright body finish improves cutting performance on ductile materials • Optimised helix for greater stiffness across diameter range • Geometry of flute design improved for efficient chip form and evacuation • Optimised for strength and rigidity with an easy feed • Easily identifiable markings allow better in-situ identification Standards • Manufactured to BS328: Part 1: 1986, DIN 338 standards Typical Applications • Wood • Composite • Soft metals • Steel • Iron • Plastics • Drilling • Tapping Notes • Available in size range: 1.00mm - 16.00mm • Also available in Imperial measurements
A handy pocket sized reference booklet of data charts & tables
Suitable for the drawing office, toolroom or Workshop. This handbook has been designed to assist Engineers,Designers, Tutors and Students in all fields of Engineering. It contains the most diverse collection reference data available in a pocket handbook and it's compact format gives rapid access to commonly used information. 212 Pages, Size 100 x 148mm (A6).
Contents:
• Abrasives - Belts, Coils & Sheets, Carbide Burrs, Diamond Burrs, Fibre Discs, Flap Discs & Grinding Discs, Grinding Wheels, Hand Pads, Mounted Points, Spindle Mounted
• Assembly - Eyebolts, Geometrical Tolerancing, Hole & Shaft Tolerances, Screw & Hole Sizes, Spanner & Key Clearances, Tightening Torques
• Conversions - Fraction-Millimetre-Gauge -Inch, Indexable Inserts: ANSI to ISO, Spanner & Socket Sizes, Surface Finish, Tensile Strength & Hardness, Weights & Measures
• Data - Average Adult Dimensions, Cutting Formulae & Abbreviations, Jig Boring Coordinates, Sines & Cosines, Tangents & Cotangents, Trigonometry Formulae, Rise Per Degree Table, Useful Formulae, Dimensions & Area, Area & Volume, Table of Chords, Engineering Drawing Standards and Abbreviations, Common CNC Control Codes, Axis Nomenclature for Machine Tools,
• Machining - Drilling, Milling, Reaming, Sawing, Tapping, Thread Milling, Turning, Types of Wear on a Carbide Insert, Lubricant Selection
• Materials - Machining Groups, Metal & Alloy Properties, Periodic Table, Steel Comparative Specifications
• Measuring - Calipers & Dividers, Calipers Vernier, Dial & Digital, Edge & Centre Finders, Engineers' Squares, External Micrometers, Height & Depth Gauges, Protractors & Combination Sets, Refractometers, Sine Bars
• Tooling - Bandsaw Blades, Brazed Tip Lathe Tools, Butt-Welded Lathe Tools, Cutting Tools (Shank Type), Files, Indexable Insert Designation, Indexable Threading, Indexable Toolholders, PMK Carbide Classification, Insert Grade Reference Chart, Shank Dimensions, Taps & Thread Forms,
• Welding - Drawing Symbols, Filter Shades, Glossary of Terms, Preparation & Techniques, Trouble Shooting
Ideal for production cutting of high alloy and stainless steels, non ferrous light metals and reinforced fabrics. Tungsten carbide tipped teeth provide superb product life and cutting performance. The teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf plus a high cutting accuracy. Safety stop at the base of the holesaw prevents drilling beyond maximum cutting depth of 13mm (1/2”). Complete assembly - no need to purchase a separate arbor and pilot drill. Replacement pilot drills available.)
Note : This is sold as single.
A100 Series HSS Straight Shank Jobber Drills (Metric) general purpose drills are manufactured from durable high speed steel with a black oxide steam tempered coating for improved chip flow and heat resistance. Features and Benefits • High speed steel construction for greater durability • Black oxide steam tempered finish for improved chip flow and heat resistance • Suitable for use on a range of metals including steel and grey cast iron Specifications • High speed steel • Steam temepered black oxide finish • Point angle: 118° • Helix angle: normal • Web thickness: standard • Relief angle: 10° - 20° • Tolerance of diameter: h8 • Tolerance of shank: f11 • Black finish (W-Finish) • BS 328/DIN338RN Typical Applications • Steels • Cast steel • Grey cast iron • Malleable cast iron • Nickel brass • Aluminium alloy • Graphite
This HSS PointTeQ range of metal drill sets from Bosch® is designed for professionals.
Each self-centering drill bit prevents the drill from slipping on the workpiece and ensures easy and quick pilot drilling. This results in a faster drilling rate compared to other entry-level metal drills. Regardless of whether you want to make clearance holes for screwed connections, cable and pipe transits or core holes for threads and rivet joints: All common metal applications for hand-held drills can be performed quickly and efficiently.
The fast drilling rate of the HSS PointTeQ reduces friction with the material. The tip heats up less than comparable metal drills with standard grinding. It does not become blunt as quickly and the wear-and-tear is reduced - this ensures higher productivity and a longer lifetime for the metal drill.
Furthermore, the drill flute is oxide-coated to vastly reduce friction, and therefore speed up chip removal - making drilling much easier and speeding up the work progress.
Features and Benefits
• New design provides a fast drilling rate for professionals
• Self-centering "PointTeQ" drill bit enables simple and fast drilling
• Reduced friction and quick chip removal thanks to flute with oxide coating
• Reduced wear-and-tear and a long lifetime thanks to higher drilling speed
• Supplied in a plastic case for easy storage and organisation
Contents
• BCH2806372M - 1 x 1 to 10mm in increments of 0.5mm
• BCH2806372S - 1 x 1 to 13mm in increments of 0.5mm
Material Applications
• Aluminium
• Cast iron
• Metal pipes and profiles
• Non-ferrous metals
• Plastics
• Steel
Standards
• Manufactured to DIN 338
A014C
Replacement drill bit for use with the complete range of standard Starrett Holesaw arbors and bi-metal holesaws.
Features and Benefits
• Highly durable drill bit - made to last
Notes
• Hole saw arbor pilot drill for all FCH series hole saws
• Fits Arbors: All except A3
• For Saws (type): All Bi-Metal
General purpose chamfering/deburring and countersinking tool. bright finish, 3 flute, ground all over. Made to DIN 335.
5 Piece Set Contents: 6.30, 8.30, 13.40, 15.00 and 19.00mm.
Series E500 HSS straight flute tap set is manufactured form hardy high-speed steel with a bright finish, ideal or hand or machine tapping in a wide variety of materials.
Features and Benefits
• HHS construction for strength and rigidity
• Versatile can be used for hand and machining applications
• Straight flute for through or blind holes
Standards
• Manufactured to ISO 529
Contents
• Set No.6 contains Taper, Second and Plug Taps
• Taper - 7-10 pitch chamfer length
• Second - 3-5 pitch chamfer length
• Plug - 1-2 pitch chamfer length
Notes
• Sizes M1 to M24
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish.
Features and Benefits
• Manufactured from durable high speed steel
• Precision ground flutes for accurate thread cutting
• Features class 2 thread forms with medium fit tolerance
• Manufactured with a bright finish
Typical Applications
• Tapping
• Steel
• Brass
• Aluminium
• Engineering
• Manufacturing
Standards
• Tap dimensions to ISO529
• Thread Forms are Class 2 medium fit tolerance
• Straight Flute Individual Sizes IS0 529
Notes
• Available in sizes 1.0 x 0.25mm - 48 x 5.00mm
• (1) Diameter and pitch not mentioned in ISO
The Milwaukee 19 Piece Thunderweb HSS-G Metal Drill Bit Set delivers exceptional strength and durability for demanding metal drilling tasks. Featuring a robust conical web design and advanced flute geometry, these bits offer superior heat dissipation and extended life. Housed in a tough, impact-resistant ABS case, they ensure safety and convenience on the job.
Features and Benefits
• Thunderweb conical design for enhanced strength
• Parabolic web cross section provides built-in durability
• Rapid chip ejection and heat dissipation extends tool life
• 135° split point for accurate, slip-free starts
• Polished finish reduces friction and wear
• Accepts higher torque and feed pressure with less breakage
• Supplied in a protective ABS case with reinforced corners
Contents
• ø 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm.
General purpose tap wrenches for tapping and reaming. Solid jaw design and heavy knurled cap. Supplied in pouch.
Stainless steel set of picks and probes ideal for carving and sculpting. Includes 3 single-end picks and 3 double-end hooks.
ENG003
Electric hand held engraver with positive on/off switch and 5 position stroke adjuster for varied engraving depths. For use on metals, plastics, glass, ceramics, wood and leather. Supplied with two Carbide steel engraving tips and an alphanumeric template.
• 5-Position adjustable engraving depth
• Soft grip
• Positive On/Off
• 1.8m cable
• Includes 2 tips and template for letters and numbers
• Short fluted jobber drill to give more strength
• To be used in Austenitic Stainless Steel, in sheet metal with work hardened surface,
and steels with galvanised surface coating
• Particularly used in hand
machines, where centring is a problem
The Unibor HSS annular cutters feature unique Unibor tooth geometry for optimum tool life and cutting speed. They are able to cut ferrous metals up to 25mm deep, and are available in a range of diameters. Made from hard wearing HSS M2 material increasing the lifespan and providing the ability to cut into various materials. Ideal for use with standard 3/4" Weldon shank magnetic drill arbors.
Features and Benefits
• Made from hard wearing HSS M2 material to increase lifespan and provide the ability to cut into various materials
• Standard 3/4" Weldon shank allows the cutters to be used with a variety of drills
• Featuring unique Unibor geometry for optimum tool life and cutting speed
Typical Applications
• Site and construction work
• Bridge Building and repair
• Truck and vehicle fabrication
• General fabrication applications
Series A101 HSS Left Hand Jobber Drills - Metric
Application:
General purpose left hand spiral Jobber drills for use on left hand running machines.
Specifications
Flute Geometry: Standard Helix, Left hand spiral.
Point Angle : 118º
Material : High Speed Steel
Manufactured to:
DIN 338 LN / BS328 / ISO 235
The No.200 set contains 5 A200 HSS centre drills, with sizes between 1.00mm to 4.00mm. They are used to produce 60° centres in components, where subsequently, manufacturing operations are to be carried out. The No.225 set contains 5 A225 HSS centre drills BS1 TO BS6. These have been designed with spiral flutes, of various lengths and forms to produce smooth centre holes to suit most applications.
Features and Benefits
• Drills create quality, smooth centre holes
• Various lengths and forms of drill
• Supplied in durable plastic cases
Contents
• DOR0253760A - 1 x 1 to 4mm in increments of 1.0mm
• DOR0253760B - 1 x BS1 to BS5
Material Applications
• Cast steel
• Cast iron
• Steel
Standards
• BS328: Part 2:1986
• DIN333A
• ISO866
• ISO2540
• ISO2541
Series A100 general purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Featuring a high-speed steel construction for strength in machining applications and a black oxide coating for increased heat and wear resistance
Features and Benefits
• HSS construction for strength in machining applications
• Black oxide coating for improved heat an wear resistance
Typical Applications
• Drilling
• Steel
• Cast iron
• Graphite
Sherwood HSS coarse ground thread spiral flute taps are manufactured from high speed steel with a black oxide finish for improved wear and heat resistance. Ideal for use on a wide range of materials including steel and stainless steel, the precision ground flutes offer excellent cutting accuracy.
Features and Benefits
• Manufacturedd from high speed steel for improved rigidity
• Oxidised finish for greater heat resistance and reduced wear
• Precision ground flutes for greater cutting accuracy
Specifications
• Class 2 thread forms
• Medium fit tolerance
• Precision ground flutes
• Spiral flute
• Oxidised finish
• Tap dimensions conform to ISO529
Typical Applications
• Tapping
• Steel
• Stainless steel
High quality steel split die. Precision engineered with accurately cut threads. Supplied with plastic storage case.
This upgraded VersaDrive® Impact Wrench adapter features:
• New Rapid-Lock, single handed loading action
• Improved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the workpiece
• Knurled collar - ultimate grip in greasy or damp conditions
• High quality, Heavy Duty steel components
• Increased strength for withstanding the drive forces from the latest generation of high torque 1/2" Impact Wrenches
• Converts standard 1/2” Impact Wrenches for use with VersaDrive®
The Faithfull HSS Straight Flute Taps are versatile, general-purpose taps for threading blind or through-holes in most materials. Suitable for machine cutting, each set contains taper, second and bottom taps to accommodate all threading. The taps are made from high-speed steel, with a bright finish and conform to ISO529.
BSPT HSS ground thread straight flute plug taps conforms to British Standard Pipe Taper specifications and are manufactured from HSS for increased strength when cutting.
Features and Benefits
• HSS construction for greater strength
• Precision ground flutes for improved tool accuracy
• Heat and wear resistant properties for prolonged tool lifespan
Typical Applications
• Tapping
• Through holes
• Blind holes
Standards
• Tap dimensions conform to ISO529
The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective method has been used since 1908. Guaranteed to minimise damage to the thread whilst effectively grasping onto broken taps, the product is available in a range of sizes.
Features and Benefits
• Simple and effective way of removing taps without the need for other more invasive tools
• Ensures no damage is done to the tap upon extraction
• Available in a variety of sizes, all with 4 flutes to suit your needs
• Manufactured from hardened steel for durability
• Tried and tested product since 1908 for guaranteed expertise
Typical Applications
• DIY
• Plumbing
• Engineering
• Automotive
Senator jobber drills are roll forged from HSS, ensuring uninterrupted grain structure. This provides exceptional strength and durability. Tips are ground for effective cutting. Suitable for drilling wood, plastic, carbon and plain steels where the cutting efficiency of ground flute is not required.
Features and Benefits
• HSS construction for increased rigidity
• Ground tips for effective cutting performance
• Ideal for use on a range of substrates including wood, plastic, carbon and steels
Standards
• Manufactured to DIN 338 Type N
Features & Benefits:
Problem-free threading of blind and through holes in specific materials.
Manufactured from a special powder metallurgy tool steel for unbeatable toughness, edge strength and wear resistance.
Significant reduction in axial forces increases thread accuracy, whilst significant torque reduction reduces machine wear and decreases risk of chipping or breakage.
Yellow, Red and Blue Shark spiral flute taps feature special edge treatment to increase strength and minimise risk of micro-chipping on the cutting edges, considerably improving performance and tool life.
Available with a choice of surface treatments and thread forms.
E240
Up to 10.00mm - DIN 371
Over 12.00mm - DIN 376
Manufactured from high quality alloy steel. Includes a taper, plug and bottom tap in each size. Stored in a portable steel storage case.
Manufactured from HSS-E cobalt steel with 3 flutes for effective cutting and stock removal, suitable for deburring and chamfering of most metals and plastics.
Features and Benefits
• Manufactured from HSS-E cobalt steel for increased toughness
• 3 flutes for increased cutting performance
• 90° Inclusive angle for effective countersinking
• Suitable for deburring and chamfering
Typical Applications
• Countersinking
• Deburring
• Chamfering
Standards
• Manufactured to BS 328: Part 5:1983
Sherwood HSS Plug Taps are the ideal option for through hole tapping in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish.
Features and Benefits
• Manufactured from durable high speed steel
• Precision ground flutes for accurate thread cutting
• Features class 2 thread forms with medium fit tolerance
• Manufactured with a bright finish
• Ideal for through hole tapping applications
Typical Applications
• Through hole tapping
• Tapping
• Steel
• Brass
• Aluminium
• Engineering
• Manufacturing
Standards
• Tap dimensions to ISO529
• Thread Forms are Class 2 medium fit tolerance
• Straight Flute Individual Sizes IS0 529
Notes
• Available in sizes 1.0 x 0.25mm - 48 x 5.00mm
• (1) Diameter and pitch not mentioned in ISO
Series J400 HSS Drill Blanks
Metric
Jobber length blank hardened and ground all over. Accurately ground without back taper. Diameter tolerance: h8. Manufactured to DIN 338.
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate class 2 thread forms, with a medium fit tolerance. Sherwood Tap dimensions conform to ISO529
Features and Benefits
• High speed steel construction for increased tool durability
• Class 2 thread forms / medium fit tolerance
• Precision ground flutes for increased cutting accuracy
• Bright finish with excellent wear resistance for prolonged tool life
• Supplied in a pack of 3 for a cost effective tooling solution
Contents
• Taper, second and plug lead
Standards
• Tap dimensions to ISO529
IS0 529 - Spiral Flute.
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results, dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance.
Manufactured from carbon steel. Use for accurate tapping and reaming in tight spaces. Fits onto 3/8"Sq drive ratchets. Knurled ring twists to help tighten taps securely. Fits taps with shank size up to 10mm.
Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non-alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.
EASY TO USE: Suitable for use on wood, plastic and soft metals, this 3 piece countersink drill bit set is quick and easy to use. VERSATILE: The kit includes 3 x 90° countersink bits (12, 16, 19mm) and the driver handle accepts all other 6mm (0.25") hex accessories.
5 Piece Set
High Performance Multi Flute
Manufactured from HSS-E cobalt for deburring and chamfering. Straight shank, ground flute 60° angle. Manufactured to BS328 : Part 5 : 1983.
Sizes: 6, 8, 10, 12.5 and 16mm.
Series J100 - Metric general purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite.
Features and Benefits
• High speed steel construction with bright finish for increased toughness
• Supplied in the as-ground condition for use with non ferrous materials
Standards
• Manufactured to BS 328/DIN338RN
Notes
• Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials.
Manufactured to BS 1127 standards the Sherwood range of HSS ground thread dies are designed for use in diestocks to produce external screw threads.
Features and Benefits
• High speed steel constriction for increased tool hardness
• Ground threads for greater tool accuracy
Typical Applications
• Diestocks
• External screw threads
Standards
c
This extended length pilot drill is suited for use with all DCH and MPH series hole saws and arbors except the A3 Ulti-Mate. Manufactured from High Speed Steel (HSS) the product is highly resilient.
Features and Benefits
• Manufactured from High Speed Steel (HSS) for durability and a clean cut
• Extended length allows for the drilling of holes in thick materials
• Designed for use with Deep Cut (DCH) and Tungsten Carbide Tipped Multi Purpose (MPH) holesaws for versatility of use
• Will fit all Starrett® arbors, except the A3 Ulti-Mate
Typical Applications
• For use with holesaws or arbors
English Type
Contents:
Standard length: 1.5 - 2.8, 2.2 - 5.0, 3.5 - 9.0mm.
Extra length: 2.2 - 5.0, 3.5 - 9.0mm.
The Dormer A225 centre drill range are manufactured from high speed steel for greater strength and rigidity when machining. Designed with spiral flutes, they are available in various lengths and forms to give high quality centre holes that suit most applications.
Features and Benefits
• Manufactured from high speed steel for greater strength when machining
• Spiral flute design for efficient chip removal
• Produces holes with a high quality finish
Specifications
• 60 inclusive angle
• Manufactured to BS328: Part 2:1986, DIN333A, ISO866, ISO2540, ISO2541
Typical Applications
• Steel
• Stainless Steel
• Cast iron
• Aluminium
• Brass
• Plastics
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others. Manufactured with a black oxide finish to resist heat, the spiral point for excellent sheering action.
Features and Benefits
• Manufactured from durable high speed steel
• Precision ground flutes for accurate thread cutting
• Spiral point for excellent sheering action
• Manufactured with a black oxide finish
Typical Applications
• Tapping
• Steel
• Brass
• Aluminium
• Engineering
• Manufacturing
Standards
• Tap dimensions to ISO529
• Straight Flute Individual Sizes IS0 529
Notes
• Available in sizes 1.6 x 0.35mm - 24 x 3.00mm
• (1) Diameter and pitch not mentioned in ISO
Evolution Broaching Cutter's are manufactured from fully ground M2 steel so they last longer, allowing more holes cut compared to standard annular cutting bits. They offer better economy, quality and performance than other brands. Available in a range of sizes.
The Starrett Fast Cut Bi-Metal Holesaws provide a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Improved tooth material and 5.5 TPI/25mm tooth form for enhanced heat and wear resistance and greater product life.Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in). Specification: Cutting Depth: 41mm.
6 Piece Set
High Performance Multi Flute
Manufactured from HSS-E cobalt for deburring and chamfering. Straight shank, ground flute 90° angle. Manufactured to BS328 : Part 5 : 1983. Inclusive angle 90°.
Sizes: 6, 8, 10, 12.5, 16 and 20mm.
Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications.
Features and Benefits
• High speed steel construction for increased tool hardness
• Spiral flutes for high quality centre holes
Standards
• Manufactured to BS 328 : Part 2 : 1986
• DIN 333A, ISO 866
• ISO 2540, ISO 2541
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results, dissipating the heat build-up associated with these applications.
Features and Benefits
• High-speed steel and cobalt construction for added hardness
• Excellent heat and wear resistance
• Class 2 thread forms / medium fit tolerance
• Precision ground flutes for added precision
Typical Applications
• Tapping
Standards
• Tap dimensions to ISO529
BS 1127.
For use with spanners to clean and repair existing external screw threads.
Series 2010 HSS-Co Straight Shank Heavy Duty Stub Drills - Metric
Metric
Heavy duty drill made of cobalt material with excellent heat resistance. For drilling steels up to 1,400N/mm2, stainless steel, heat resistant steels and bronze. Ideally suited for volume production on automatics. Point angle: 135°, helix angle: normal, web thickness: strengthened, tolerance of diameter: h8, tolerance of shank: f11.
Manufactured to BS 328, DIN 1897RN. Point to DIN 1412C.
A022 HSS Straight Shank Stub Drills feature a self-centering split point for superb hole quality and positional accuracy. TiN tip coating for increased performance in most materials including steel, stainless and aluminium. 135° point angle (TiN tipped and split point 2mm and above) Manufactured to DIN1897 Lengths
Features and Benefits
• Suitable for drilling alloy steel, carbon steels, cast iron, titanium and aluminium
• Self-centering split point for superb hole quality and positional accuracy
• TiN tipped for increased heat and wear resistance
• 135° point angle (TiN tipped and split point 2mm and above) for excellent cutting efficiency
Standards
• DIN1897
Series E100 HSS Straight Shank Extra Length Drills
Metric
General-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° - 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.
Brad Point Drill Bit offers precise drilling in soft and hard wood
• Extremely sharp drill bit with a centring tip allows for exact positioning of the hole.
• High-quality shoulder cutters with precise edges that produce tear-free smooth drilling in hardwood and softwood..
• For exact results, two flutes prevent debris from clogging the hole and easily remove excess materials.
IS0 529 - Spiral Flute
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance.
Featuring a constant pitch - first choice for cutting thin sheet materials up to 3mm thick. For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic. Featuring a hardened HSS cutting edge welded to a tough alloy steel body. Heavy duty shatter-resistant construction; virtually unbreakable. 6 teeth per inch. 38mm (11/2") cutting depth.
Features and Benefits
• Constant pitch: 6 teeth per inch
• Max. cutting depth: 38mm
• Heavy duty shatter-resistant construction
• Ideal for cutting thin sheet materials up to 3mm thick
• For producing high quality holes in wood, steel, brass, bronze, cast iron, aluminium and plastic
Straight Flute Long Series
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235
The Faithfull Earth Auger Drill Bit is made to be used with a 3/8in Hex Drive Drill, or 18V corded drills, and is specially designed for drilling at high speed in soil and solid clay. Made from heavy-duty steel to ensure maximum durability and significantly reduces manual effort and time.Suitable for various landscaping and horticultural tasks, such as digging holes for fence posts, and ground lights, or preparing soil for planting vegetables, bulbs, and flowers.
Faithfull Step drills are used for cutting varying hole sizes in material up to 4 mm thick without changing the drill bit. Each drill cuts parallel holes within a specific size range, rising in 2mm increments.
This Metric Jobber Drill Set is designed for efficient and precise drilling across a variety of materials. Roll forged from high-speed steel (HSS), these drills feature an uninterrupted grain structure that ensures excellent strength and durability. The precision-ground tips deliver effective cutting, making them suitable for use on wood, plastic, carbon steel, plain steel, and stainless steel. This set includes drills in increments of 0.5mm, ranging from 1-13mm, offering flexibility for diverse drilling tasks. Conveniently supplied in a sturdy metal case, the set provides easy storage and organisation. Combining reliability and versatility, it is an essential choice for professionals and DIY enthusiasts alike.
Features and Benefits
• Roll-forged HSS construction enhances strength and longevity
• Ground tips ensure precise and efficient cutting performance
• Designed to work on various materials, including wood, plastics, and metals like carbon and stainless steel
• Contains a comprehensive range of drill sizes, increasing versatility
• Packaged in a robust metal case to keep drills organised and easily accessible
Standards
• DIN 338N
• BS 328
HSS Metric Coarse Left Hand Straight Flute Ground Thread Tap Set
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Features
• Manufactured to IS0 529
• Straight Flute
• Set contains 1 of each taper, second and plug lead
• Bright finish
HSS multi diameter step drills produce good quality holes in a wide variety of sheet metal, using either a bench drill or light pedestal drilling machine. Manufactured from high speed steel, they offer sound rigidity, strength and stability when machining. Each tool cuts parallel holes in a range of specific sizes and is compatible with materials up to 1/8" (3mm) thick.
Features and Benefits
• High speed steel construction for greater strength, rigidity and stability
• Excellent wear and heat resistance for prolonged tool life
• Cuts parallel holes in sheet metal
Typical Applications
• Drilling
• Sheet metal
Notes
• Available sizes 1-12mm to 6-37mm
Metric Series
Ground flute, for drilling centre holes on components prior to machining. Extra length drills particularly useful for drilling centre holes in recesses. Manufactured to BS 328 : Part 1 : 1986, DIN333A : ISO 86, ISO2540, ISO2541.
Series S100 HSS straight shank stub drills are designed as general purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron.
Features and Benefits
• Manufactured form HSS for strength and rigidity when machining
• Black oxide coating for additional heat and wear resistance
• Designed for use on automatic and turret lathes
Typical Applications
• Drilling
• Steels
• Cast iron
• Alloy steel
• Malleable cast iron
Standards
• Manufactured to BS 328: Part 1: 1986/DIN 1897.
IS0 529 - Straight Flute Individual Sizes - Second.
Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results, dissipating the heat build-up associated with these applications.
IS0 529 - straight flute plug taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others. Manufactured with precision ground flutes for producing accurate thread forms, conforming to ISO529.
Features and Benefits
• HSS bright finish construction for increased durability and tool lifespan
• Class 2 thread forms / medium fit tolerance
• Precision ground flutes for greater cutting accuracy
Standards
• Tap dimensions to ISO529
HSS 90° straight shank spotting drills series C520 special drill for accurate and fast spotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and chamfering of tapping holes in one operation. Only suitable for shallow depth drilling.
Features and Benefits
• HSS construction for improved strength and durability
• Suitable for shallow depth drilling
• 90° for accurate and fast spotting
Typical Applications
• Spotting
Set contains: 2.0 x 85mm, 2.5 x 95mm, 3.0 x 100mm, 3.5 x 112mm, 4.0 x 119mm, 4.5 x 126mm, 5.0 x 132mm, 6.0 x 139mm, 8.0 x 165mm, 10.0 x 184mm.
Metric.
Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.
METRIC TOLERANCES:
Diameter: Over 1.50 ~ up to 5.00. Tolerance: +0.075, -0.000.
Diameter: Over 5.00 ~ up to 20.00. Tolerance: +0.125, -0.000.
A120 HSS Straight Shank Stub Drills
Metric
For general machining applications. Use in portable drills, turrets and automotic lathes. Special split-point ensures easy starting and accurate drill location. 135° point angle (118°1.00~2.90mm & over 13.00mm). Manufactured to DIN1897.
General purpose metric drills for drilling steels, cast iron, nickel brass and graphite.
These HSS drills are designed for light duty work.
Features and Benefits
• 1/2in. reduced parallel shank for drilling larger holes
Standards
• Manufactured to works standard
Replacement jaws to suit Kennedy ratchet type tap wrenches
Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you're using. Hard wearing and compatible with Torx fasteners these spares are ideal for the replacement of lost or damaged keys.
Features and Benefits
• Range of indexable tooling spares for easy replacement of lost or damaged tools
• Specifically designed to fit Torx fasteners
• Fits the Indexa Seiki toolholders
Typical Applications
• Torx fasteners
Ground point drill bits suitable for ferrous and non-ferrous metals, offering good drilling speeds and extended working life. Achieve fast, accurate drilling.
BS 1127.
For use with spanners to clean and repair existing external screw threads.
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Features
• HSS construction for increased cutting strength
• Ground flutes for increased cutting precision
• Excellent heat and wear resistant properties
• Manufactured with a bright finish
Contents
• 1 each, taper, second and plug lead
Standards
• Manufactured to ISO 529
IS0 529 - Straight Flute Individual Sizes - Second
The DeWalt Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.
A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.
Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.
Suitable for masonry, brick, stone, tiles and light concrete.
This range of Bosch HSS drill bits have a reduced shank. Suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics.
Key Features of this Bosch Reduced Shank Drill Bit:
- PointTeQ tip design remains sharp and ensures continuous durability for fast drilling in metal
- Increased drilling rate generates less heat and wear
- Self-centering tip prevents wandering for quick and easy drilling starts
- High elasticity for low risk of breakage
- Black-oxide coated flute provides fast chip removal
- Manufactured to DIN 338, Type N (flute angle), 135° tip
The Guhring 90° SpyroTec Countersink set offers innovative countersinking operations. With minimal vibration even when using a hand drill, the form and pitch of the helical cutting edges provide accurate and stable countersinking.
Features and Benefits
• The titanium aluminum nitride coating (TiAIN) provides wear resistance and thermal protection
• Convex cutting edges combined with unequal helix angles provide a stable and low vibration cutting process, which removes chatter marks
• Suitable for use in high temperature applications
*Image for illustration purposes only*
The Faithfull 300mm extension complete with hexagonal locking key. Used with flat bits of between 16mm to 35mm it allows bits to bore deep or longer length holes through thick timber. Can be used with all makes of flat bit featuring a 1/4in hex shank.
The Starrett A2E Arbor is suitable for use with holesaw sizes ranging from & Oslash32-210mm. It is fitted with a 6.5mm/1/4in pilot drill, with set screw in the arbor body allowing easy replacement of the pilot drill. This arbor features an extra-long pilot drill, suitable for use with the extended cutting depth of the Fast Cut Multi Purpose Holesaws. Shank Size 7/16in hex suitable to fit 1/2in capacity chuck.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.
These high-performance Faithfull Tungsten Carbide Tipped Drill Bits fit into SDS Plus chucks which provide a particularly secure non-slip grip that transmits maximum power for rotary percussion drilling, mainly into concrete.The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.For use in bricks, blocks, concrete containing aggregates, marble and hard stone, and other hard masonry materials.
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.
Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications. TiN coating on working parts for increased heat and wear resistance, offering a prolong efficient cutting lifespan.
Features and Benefits
• HSS construction for increased durabiluty
• TiN coating for increased heat and wear resistance
• Delivers high quality centre holes in most drilling applications
Typical Applications
• Drilling
Standards
• BS 328 : Part 2 : 1986,
• DIN 333A, ISO 866, ISO 2540, ISO 2541
Series T100 HSS Taper Shank Drills - Inch
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN.