Find Chisels Products

S62424
Steel Post hole digging bar manufactured from high grade heat treated steel bar with one chisel point and one tamper head. The post hole digger has a 60mm mushroom head at one end and a bevelled chisel edge at the other. It is frequently used for digging small holes in earth.
Overall length: 1800mm.
Blade size: 230 x 60mm.
Weight: 8.00kg.

For heavy duty levering and dismantling work, the angled heel blade offers greater leverage.

Large chisel tip.

Used for cutting and chipping cold metals and brickwork, these flat cold chisels are designed to exert force with precision. Manufactured from high quality octagonal chrome vanadium steel and finished with a ground cutting edge, the product is available in a range of sizes to suit your application.
Features and Benefits
• Manufactured from high quality chrome vanadium steel for maximum durability
• Available in a range of sizes to best suit your requirements
• Octagonal design allows you to have better grip to deliver more force when using
• Ground cutting edge is designed to hold its point even with extensive use
Typical Applications
• Engineering
• Automotive
• Construction
Standards
• ASME B107.47M-1998

The Faithfull Straight Gouge Carving Chisel comes with wooden handle, deep seated tang, brass ferrule and fully polished blade. Gouges are designed with a concave blade to remove wood without causing splintering. The depth of the curve or sweep determines the depth-of-cut. This product is made with FSC® 100% Certified Wood from well-managed forests.Please Note: Woodcarving chisels will require final sharpening prior to their first use.

The Right Angled Seam Chisel And L Bar has been specially designed by Kennedy Tools for the separation of hard to reach spot welds and bonded panels as well as coping with the many traditional uses for pry & wrecking bars.
Features & Benefits
?Easily separates hard-to-reach spot welded or bonded panels
?Sharpened on three edges, the sharp end allows for penetration between the panels and both side edges allow for side impact to drive the panels apart without damage
?90 degrees end for use in hard-to-reach pinchweld areas
?Made from a super tough alloy steel
?Will save the technician up to 15 minutes per panel replacement
The Right Angled Rascal Bar with three sharpened edges is designed to allow two-directional hammer use on quarter panels, rockers and any other pinchweld. The sharp end allows for penetration between the panels and the two lower edges allows for side impact to drive the panels apart. The chisel tip can be used for starting seam separation.

BULBCB72CP Chisel and Point Crowbar 72 x 1.1/8in
The Bulldog Chisel and Point Crowbar is perfect for prying and levering heavy objects. Made from drop forged steel for ultimate strength and durability. It has been completely epoxy coated for rust resistant as well as further increasing the strength and quality of the tool. The crowbar's hexagonal body is built for an easy grip and reduces the likeliness of the tool slipping in your hands.

Used for cutting and chipping cold metals and brickwork, these 3 piece cold chisel sets are manufactured from high-quality octagonal chrome vanadium steel with a ground cutting edge. For use on brickwork, masonry and cold metals.
Features and Benefits
• Manufactured from chrome vanadium steel for durability
• 3 piece sets ensure you have suitable options o suit a variety of applications
• Supplied in a plastic wallet for convenience
Typical Applications
• Construction
• Auomotive
Standards
• ASME B107.47M-1998

Also fits; Makita - HM0810/8035NB, HM0810T, HM1200, HR3500/HR3510/HR3520, Atlas Copco - PH5F, Hitachi - DH28Y, DH38YBI, DH42.

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.

The Record Power R150CB Hollow Square Mortice Bits have long windows to allow easy ejection of wood chips, and are readily sharpened at their cutting edge to ensure clean, fast cutting of the mortice. Suitable for use with the full range of Record Power morticers as well as most other machines. Shank Size: 13/16in.

The uni-ball PX-30 Paint Marker offers bold, long-lasting colour with its oil-based ink, making it ideal for a variety of creative and practical applications. Designed to work on almost any surface, including paper, metal, glass, plastic, wood, fabric, and stone, its waterproof and fade-resistant ink ensures your marks remain vibrant. The 8mm chisel tip allows for thick, confident lines, perfect for covering large areas. Its heat and water resistance add durability, making it a favorite for artists, students, and crafters alike. Free from sulphur and silicon, this marker is versatile and reliable for both professional projects and personal use.
Features and Benefits
• Oil-based ink delivers bold, long-lasting colour
• Writes on a variety of surfaces including metal, plastic, glass, and wood
• Waterproof and fade-resistant for durability
• 8mm chisel tip creates thick, confident lines for large coverage
• Resistant to heat and water for added protection
• Sulphur and silicon-free, making it versatile for different uses
• Suitable for both professional projects and creative crafts

TM444
Hardened and tempered one piece steel blade, used for chamfering, dovetailing and making clean cuts in tight corners. With 'Blue Chip' handle which has a rounded square cross section, to fit comfortably in the hand and give better control. Available in sets of 4, 5 and 6 pieces.
IMAGE IS FOR ILLUSTRATION PURPOSE ONLY

These carbon steel hand chisels come in a variety of sizes to meet any requirements. They're ideal for general cutting and shaping of both metals and stonework.
Features and Benefits
• Sleek black finish for aesthetic purposes and ease of handling
• Available in a variety of sizes to suit personal needs
Typical Applications
• For general cutting and working on metals
• For cutting, shaping and facing stonework

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.

Roughneck Cold Chisels are manufactured from drop forged, heat treated steel for strength and durability. They feature powder coated with polished tips for greater corrosion resistance. Supplied with tip protectors.

High quality drop-forged steel cold chisel with octagonal shaft design. Black powder coated with polished tip for great resistance against corrosion. Fitted with comfort grip for greater comfort and control as well as protection against striking tools. Manufactured in accordance with BS 3066.

This range of blue-chip bevel edged chisels possess a tempered one piece steel blade, used for chamfering, dovetailing and making clean cuts in tight corners. The 'Blue Chip' handle has a rounded square cross section, to fit comfortably in the hand and give better control. Available in an array of sizes to suit your needs.
Features and Benefits
• Blades are manufactured from extremely high quality steel for improved
sharpness and edge retention even with extensive use
• The blade is hardened and tempered for maximum resilience even over time
• Contoured handle improves user comfort, grip and control
• Robust and durable handle allows the product to be struck with a hammer or mallet for effective chiseling
• Available in a range of sizes to suit your needs
Typical Applications
• Carpentry
• Construction
• DIY

Hardened and tempered one piece steel blade, used for chamfering, dovetailing and making clean cuts in tight corners.
With 'splitproof' handles which are designed to absorb hammer blows and hard demanding woodwork.

With an extra large strike cap, a split-proof design and an impact resistant steel centre, this range of high impact wood chisels are of a high quality, professional standard. Boasting a one piece forged carbon rich blade that has been hardened and tempered up to the last inch for a long working life, these products are completed by a split-proof, shock and vibration absorbing handle.
Features and Benefits
• Blade manufactured from high quality steel for product longevity and high performance over time
• Ergonomic rubber grip for optimum grip and comfort when using
• Available in varying sizes and specifications to suit your individual requirements
• Split proof design ensures your tool is durable and has a high tolerance level
Typical Applications
• Ideal for use on heavy duty woodworking applications, where hammering from various angles at a high impact rate is necessary

Versitile water based pigment ink marker. Ideal for industrial, automotive and electrical use apllications. Writes on most surfaces including paper, card, plastic, glass, fabric and metal. Rain resistant but can be washed off, making it ideal for use on non porious chalk boards. Odour free, no solvents, no lead or cadminum - ideal for marking on metal. Produces vivid opaque colour finish

Flat Cold Chisels
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

Available in traditional clipt pattern or chisel pattern.

Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. These flat cold chisels are suited for use on brickwork, masonry and cold metals. Available in a variety of sizes to suit your needs.
Features and Benefits
• Octagonal shank offers superior grip
• Can be used on brickwork, masonry and cold metals for versatility of use
• Manufactured from chrome vanadium steel for resilience
• Available in a range of sizes to suit your requirements
• Ground cutting edge ensures accurate and precise working
Typical Applications
• Carpentry
• DIY
• Construction
Standards
• BS 3066

For heavy duty chiselling; channeling and demolition tasks in concrete, stone (medium hardness), floor and wall tiles, general masonry and mortar.

The Hultafors HDC Heavy-Duty Chisels are ideal for tasks requiring strength and precision. Forged in one piece with continuous robust I-profile for extreme breaking strength and to maximize the power transmission down into the workpiece. A 25° cutting edge provides an optimal ratio between sharpness and durability.The entire blade, including the handle, can be placed flat against the surface which allows you to cut parallel to a flat surface. Fitted with a grip-friendly Santoprene handle and impact resistant nylon striker. The striker can be replaced when worn down.Each chisel is supplied in a practical holster. The holster can be attached to both a belt and a button on your work clothes. If your belt is thick, cut away the small pin on the cover.

The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfortable grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer-lasting edge - less time spent re-sharpening. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort.

These Roughneck Pro Series Bevel Edge Chisels are manufactured chrome vanadium and heat treated for long life performance. The bevel edge blade has two cutting angles, 25° ground angle and a pre-honed 30° angle for immediate use.The soft grip handles provide comfort and control and the heavy-duty end cap allows repeated striking. The thru-tang design transfers striking force to the cutting edge for maximum effect and outstanding durability.Supplied with tip protectors for protection and user safety.

TheFaithfull HSS Turning Chisel Spindle Gouge isused to scoop and cut deep U grooves in spindle turning, and making holes.For use on woodturning lathes.Manufactured from High Speed Steel, these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time being re-sharpened.Fitted with a full sized contoured wood handle for user comfort and brass ferrules.The handle is made with FSC 100% Certified Wood from well-managed forests.Specifications:Overall Length: 410mm.Length of Blade: 160mm.

The Blue Spot 80mm SDS Plus Cranked Chisel is specially designed with a cranked shaft for quick and easy removal of floor and wall tiles. Ideal for chipping away plaster and cleaning and dressing brick and stone. Heat-treated for increased durability. Suitable for use with SDS plus power drills with a roto-stop function.

Bosch Style Chisels
For Bosch: GBH7/45, UBH6/35, UBH12/50, USH6, 11202, 11203, 11204, 11206, 11208, 11209. AEG
(Atlas Copco): PHD26, PH38, PHD38, PH240D, PH350D. Black & Decker: HD2032, HD2038, P8032, P8038.
19mm hex shank with single flat and round tang.

Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. These contractors flat, cold chisels are suited for use on brickwork, masonry and cold metals. Available in a range of sizes, all products possess a moulded yellow plastic guard for protection and grip.
Features and Benefits
• Moulded plastic guard protects the user's fingers and improves grip - and in turn - force delivered
• Ground cutting edge allows for precision working
• Available in a variety of sizes to suit your requirements
• Manufactured from chrome vanadium steel for ultimate durability
• Octagonal cut shape bolsters overall strength
Typical Applications
• Construction
• Bricklaying
• Contractors
Standards
• BS 3066

Chrome Vanadium - used for channelling brickwork.

Application: Concrete, demolition, render, tiles, bathrooms
• Diameter: 40 mm
• Overall Length: 250 mm
• Shank: SDS-PLUS
• Working Length: 190 mm
• Pack Quantity: 1

Designed for professional use, these Classic pattern wood chisels are suited for carpenters, craftsmen and joiners. Comprised of CAB (Cellulose Acetate Butyrate) handles that are hammer-blow resistant and chrome vanadium alloy steel blades that are hardened, tempered, ground and polished. Available in a range of sizes to suit your needs.
Features and Benefits
• Available in a variety of sizes to suit your requirements
• Handles are specifically designed to be resistant to hammer blows, making them suited for use carpentry
• Blades are manufactured from chrome vanadium alloy steel for resilience
• Hardened, tempered and ground blades are made for longevity
Typical Applications
• Construction
• Joinery
• Woodworking

Craftsman
Hammer-blow resistant handles. For craftsmen and joiners. Designed to give a life-time of high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished. 'CAB' (Cellulose Acetate Butyrate handles).

Spark Resistant Cylindrical Drift
Aluminium Bronze
**Image for illustration purpose only

Chisels with extra high resistance to wear and deformation.
•Overall Length: 400mm
•Shank: SDS-Plus
•Working Length: 340mm

For beginner woodworkers, this Chisel from Stanley® is the ideal choice. The high carbon steel blade is hardworking and durable, while the solid polypropylene handle gives a comfortable grip and is impact resistant.
Features and Benefits
• Lacquered blade for rust prevention
• Impact resistant handle
• Ideal for beginner woodworkers

Manufactured from Beryllium Copper. Precision cast.

Also fits; VP9, RK4, DKR34, 21TEC, 3300 Ball Type (Gold).

DEWALT 28mm Hex shank 30kg Steel Cold Chisel 32mm x 500mm fully hardened steel body delivers increased life and durability. Micro-processor controlled heat treatment for consistently tough, long-life chisels.

The Faithfull Posthole Digging Bar manufactured from high-grade heat treated steel bar, with a round shank. It has a 60mm (2.3/8in) mushroom head at one end and a 64mm (2.1/2in) bevelled chisel edge at the other. Frequently used for digging deep post holes, and the mushroom head is used for tamping down.

Soft touch bevel edge chisel set that features a range of tough, dependable chisels will tackle the most intricate or demanding job effortlessly. High quality chisels developed with a hardened and tempered blade for added strength and durability making it slow to blunt or rust. All sharpened ready for use.
Features and Benefits
• Large metal striking cap prolongs life and prevents handle mushrooming and withstands hammer impacts
• Strike cap prolongs life and prevents handle mushrooming
• Durable ProTouch grip handle for comfort in tough worksite conditions

These Roughneck Scutch Chisels are manufactured from drop forged, heat treated steel for strength and durability. They are powder coated for greater corrosion resistance. They are ideal for preparing masonry and stone when used with comb or chisel bits, they can also be used for chasing out channels in brick, concrete or stone walls Use in conjunction with ROU31996 Scutch Combs. Size 25 x 203mm/ 1 x 8 inch

Stanley Bevel Edge Chisel Set designed for tradesmen. Ground finished, hardened and tempered alloy steel blade. The blade is lacquered for rust prevention. Fitted with a solid one-piece, impact-resistant, blue polypropylene handle. Supplied in a carry case with a sharpening stone and oil. Sizes 6, 12, 18 and 25mm.

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO™ process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufactured from hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety.

Britool Constant-Profile Flat Cold Chisel, treated for 54-58 HRC. Conforms to DIN 7255 standards.

The Faithfull Chisel Roll is made from a hard wearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sized chisels and small tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. New improved design features wider pockets to fit chisels with or without blade guards. The chisel size is printed on the pocket for easy product selection.

The Faithfull Bevel Edged Chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.

The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.

High quality drop-forged steel cold chisel with octagonal shaft design. Black powder coated with polished tip for great resistance against corrosion. Manufactured in accordance with BS 3066.

This high performing, durable chisel is compatible with most brands of portable air chisels including Chicago Pneumatic, Desoutter, Kobe, Toku and YK. Therefore, this flat chisel is versatile and is suitable for a wide array of different air chisels.
Features and Benefits
• Excellent compatibility with an array of air chisels
• Durable design to shape and work solid materials
• Tough SCM440 chromium alloy steel construction
Typical Applications
• To be used with air chisels when shaping, carving or working solid materials such as metal and stone

This Footprint Cold Chisel is supplied with a comfortable hand grip for extra safety. Ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain. 1 x Footprint 591 Cold Chisel with Hand Guard 250 x 25mm

Forged from quality chrome vanadium steel for increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety. Size 300 x 32mm (12 x 1.1/4 in).

11152
Manufactured to DIN 6453. Expert quality, manufactured from special air hardened chrome vanadium steel for long life. The cutting edges are accurately ground, with specially tempered heads. With heavy moulded impact absorbing hand protection grip.

TOUGH: This bolster chisel is made from tough, induction hardened steel and is ideal for general brick work. COMFORTABLE TO USE: The octagonal shaft has a rubber guard and comfortable grip for a positive hold.

Forged, single-piece solid steel with a ground, hardened and tempered cutting edge. Octagonal shaft. Powder coated for corrosion resistance. For demolition, shaping, splitting and chipping of masonry.

Forged, single-piece solid steel with a ground, hardened and tempered cutting edge. Octagonal shaft with protective hand guard. Powder coated for corrosion resistance. For demolition, cutting and shaping of bricks and blocks.

FAISDSCSET3 SDS Plus Chisel Set, 3 Piece
This Faithfull SDS Plus Chisel 3 Piece Set made for demolition and break-through tasks in concrete and masonry. Fast, tool-free chisel changing thanks to the SDS-plus system saving time and effort. Made from high quality heat treated alloy steel. Suitable for use with lightweight rotary and impact hammers with SDS-plus sockets from all power tool brands.
This 3 piece set contains:
1 x Flat Chisel for concrete as well as demolition and break-through tasks in masonry.
Width: 20mm.
Depth: 14mm.
Length: 250mm.
1 x Spade Chisel for removing plaster and lightweight demolition tasks in masonry, and breaking and loosening soil, screed and bitumen.
Width: 40mm.
Depth: 14mm.
Length: 250mm.
1 x Pointed Chisel for demolition and corrective tasks in concrete and break-throughs in masonry.
Width: 14mm.
Length: 250mm.

IRWIN3 Piece SDS Plus Chisel Set. Ideal for all chasing and demolition work in mortar, brick and concrete. Suitable for use with hammer drills with a rotary stop feature. Supplied in a plastic tube. Contains: 1 x Pointed Chisel 250mm.1 x Spade Chisel 40 x 250mm.1 x Flat Chisel 20 x 250mm.

Strong plastic edge guards to fit a range of chisels for protection against injury and damage. Includes 6, 13, 19, 25, 32 and 38mm (two of each size) .

The Stanley FMHT0-16145 Fatmax Folding Chisel ensures maximum strength and control The Stanley FMHT0-16145 folding chisel has a strong 25mm carbon steel blade and a steel striking cap. The chisel's handles fold to enclose the blade within to protect it from damage and to provide easy storage. This short series blade ensures maximum strength and control. Features: 1-inch blade Durable steel strike cap Short blade for greater strength and control Hardened and tempered high carbon steel blade Locking handle that does not come apart during use Specification: Net Weight: 0.285kg Blade size: 25mm (1in)

The Heller 6mm x 250mm SDS Rake Chisel is designed for precision chiselling and light demolition work. Manufactured from drop-forged chrome molybdenum, it features a heat-treated tempered edge that ensures optimal hardness, toughness, and wear resistance. This chisel is versatile, making it perfect for a variety of applications such as stripping plaster, mortar chasing, and breaking through brickwork. Brand: Heller Size: 6mm width, 250mm length Material: Drop-forged chrome molybdenum Type: SDS Plus Rake Chisel Features: Heat-treated tempered edge for increased durability Usage: Suitable for light demolition, chiselling, plaster stripping, mortar chasing, and channel cutting Compatibility: Compatible with SDS Plus systems for secure fitting

For Kango: 900K, 928, 950K, 978, 1400. Hitachi: DH38YD, DH50SA, H55SA. Makita: HM1200K, HR3850K. 21mm Hex Shank with Single Flat & Round Tang.

Chrome vanadium - hardened and tempered cutting edge. For cutting the tongue in tongued and grooved floorboards.

For Kango: 501, 627, 628, 637, 638, 430 - Type 750 Shanks. 19mm Hex Shank with Single Flat and Round Tang.

High grade forged-steel with shot-blast finish. Suitable for all tools with SDS-Max system.

Flat Cold Chisels
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Beryllium Copper are manufactured to 30-10HRC and offer a breaking strain of 1117 N/m - 1236 N/m. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Replacement tool blades to suit the Kobe HP2090K air hammer. Will also suit portable air chisels manufactured by CP, Desoutter, Toku and YK.
Features and Benefits
• Wide range of configurations available to suit individual tasks
• Suitable for general cutting and chipping of metals and various stonework applications
• Resistant to mushrooming after prolonged use
Notes
Available Blade Types:
• Clawripper / Panel Cutter
• Flat Chisel
• Spot Weld Cutter
• Tapered Punch Blade
• Single Blade Panel Cutter

4-point spark resistant chisel with 20mm wide hexagon shaft.
Length: 200mm

Generally used by Electricians and Plumbers for cutting the tongue, in tongue and groove floorboarding, requiring a flexible blade to give sufficient leverage to raise a floorboard enough to insert a lever bar prior to laying pipes or wiring.

Used for channelling concrete floors. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.

Diamond Point - Chrome Vanadium
Used for channelling brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.

Used for channelling brickwork. Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.

For removing cement and mortar from between bricks and blockwork to either insert a wooden plug for nailing and screwing or to remove a brick for the placement of an air gate. The cutting edge is wider than the blade for clearance and the fluted blade speeds the removal of spoil.

• Comprising:
- 249.G 12 - 14 - 16 mm: 3 sheathed drift punches.
- 263G. 19 - 20 - 22: 3 sheathed chisels.
- 265.G 18: 1 sheathed cape chisel.
- Heat-formed tray PL.611.
Weight: 3.000 kg.

For use with power tools.
Shank: Round 0.401" (10.2mm)
Length: 7" (180 mm)
Width: 3/4" (19 mm)

This SDS-Plus accessory delivers outstanding performance with exceptional wear resistance and durability. Induction hardening increases tool life by up to thirty percent, while enhanced cutting efficiency boosts material removal rates by more than fifteen percent. Built for reliable, safe operation, it maintains consistent strength and stability even under demanding use.
Features and Benefits
• Induction hardened for extended service life
• Increased material removal for faster progress
• Robust 20 mm diameter for dependable strength
• SDS-Plus shank for secure, stable fitting
• Optimised working length for precise control
• Designed for long-lasting performance under heavy use

Designed for dressing formed wheels. Similar to single point tools but more robust and no resetting required. 3/8” x 3” holder size.

Allows a rounded recess in wood to be cut to a square recess with the use of a hammer. Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates. Spring loaded high speed steel (HSS) anvil for a sharp cut and long life. Light weight aluminium body design. Can be used with the Trend Hinge Jig. Can be resharpened.

Spark Resistant Chisel
Hexagon shaft
Aluminium Bronze

2609390576
Pointed chisel, long life with 30% longer lifetime and 15% higher material removal rate.
Overall length: 250mm.

Split-proof pro bevel edge chisel sets. Carbon rich blade is a solid one-piece forging, hardened and tempered up to the last inch for a long working life.
Guaranteed split-proof handle helps absorb harmful vibrations. Highly durable friction grip. Sturdy neck and bolster, honed and sharpened.