Find Pneumatic Valves Products
Available in Female to Male and Female to Female fitting.
Pressure range: 0 to +10bar.
Temperature range: -25 to +90°C.
1/4" BSP Parallel Female, Ball Vibrator, Air Consumption at 6 bar 200 Litres, Maximum Working Temperature +100┬░C, Working Pressure 2 to 6 bar, FT Pro
Pressure Range: 1 to 10 bar. Temperature Range: 0°C to +80°C.
Ball Valve Gas Approved - T Handle
Female x Female - BSPP Thread - ISO 228
Manufactured according to EN 12165
Working Temperature -20°C to +150°C
Working pressure 40 bar (580 psi)
3/8" BSP Parallel Female, Single Acting Spring Return Normally Closed, V.I.P. Axial Flow Valve With Nitrile Seal, Working Temperature, Actuator -20° to +80°C (Dry Air) , Valve -20°C to +150°C, Omal
Screwed BSPP, Nickel Plated HT Brass Body, Full Bore, Yellow PVC Coated Steel Lever, WRAS Approved. 1/4” to 2? certified to EN331:1998+A1:2010 Manually Operated Valves for Gas Installations for Buildings (CPR)
1/4" BSP Parallel Female, Push Pull with Shut Off, 3/2 Function, Push Pull Actuation, Maximum Working Temperature +60┬░C, Maximum Working Pressure 10, bar, AZ Pneumatica
1/2" BSP Parallel Inlet x 1/4" BSP Parallel Outlet x 1/2" BSP Parallel Female x 5 x 1/4" BSP Parallel Female, Manifold, Single Sided, Aluminium, FT Pro
1/2" BSP Parallel Inlet x 1/2" BSP Parallel Outlet x 1/2" BSP Parallel Female x 3 + 3 x 1/2" BSP Parallel Female, Manifold, Double Sided, Aluminium, FT Pro
Air take-off SY1 Specifications: EAN code: 8024986885842 Short description: SYNTESI SY1 PA 2 WAY Quantity per package: 0 Minimum order quantity: 0 Unit of measure: items ZHY_CL0013
4mm Inlet, 3/2, Normally Open Function, Palm Push Button Actuation, Rear Connection, Valve, Red, Working Temperature -5┬░C to +50┬░C, Maximum Working Pressure 10 bar, Pneumax
1/8" BSP Parallel Female, Valve with Shut Off, 3/2 Function, Lever/Lever Actuation, Maximum Working Temperature +60┬░C, Maximum Working Pressure 10, bar, AZ Pneumatica
1/8" BSP Parallel Female, 3/2 Function, Push Button/Spring Actuation, Valve, Green, Working Temperature -5°C to +50°C, Maximum Working Pressure 10 bar, Pneumax
1/4" BSP Parallel Female, Valve 5/2, Plunger/Spring, Mechanical, Super X Actuated In-line, Working Temperature 0┬░C to +70┬░C, Maximum Working Pressure 10 bar, IMI Norgren
242260628 Ga-Vs 6/4-G1/4 Push-on - OT-IMI028117
Series 2
Function: 3/2 way N.C.
Connection: 4mm push-in.
Pneumatic data:
Operating pressure: 2 - 10bar (30 - 145psi).
Nominal pressure: 6bar (87psi).
Nominal flow: *Qn = 60l/min. (2.12scfm).
Nominal diameter: 2.5mm.
CV rating: 0.06.
Resetting: Spring return.
Combination of adjustable orifice and fixed flow allows transmission of a pneumatic signal after a fixed time period.
These swing check Non-Return Valves are ideal for controlling the flow and direction of fluids. Available in a range of sizes, each product is manufactured from brass and has two female threads. Controllable manually via the plastic covered handle.
Features and Benefits
• Available in a range of sizes to suit your needs
• Manufactured from brass for durability and resilience
• Simple yet effective way of controlling the flow of fluids
Typical Applications
• Automotive
• Engineering
• Plumbing
Suitable for a wide range of applications offering a cost saving solution.
Media: Most non-corrosive liquids and gases including air, water, solvents and fuels
Operating temperature: - 20°C to +130°C
Actuation: 90° rotation of the lever. It is recommended that the valve is in either the fully open or fully closed position and that the valve should be actuated at least twice a year.
Designed for refrigerant testing, charging and evacuation. Can be used on automotive, commercial and domestic A/C and domestic refrigeration systems. Gauges marked for R134A and R12 pressure reading. Colour-coding on gauges, valves and hoses for easy operation. Features 2-way manifold and sight glass for monitoring refrigerant flow. Quick couplings included and hanging hook.
Series 3
Port: 1/4.
Type of construction: With spool.
Media: Filtered air without lubrication.
Working pressure min./max.: 0,5/10 bar
Ambient temperature min./max.: +0/+70°C
Medium temperature min./max.: +0/+70°C
Medium: Compressed air
Port 1: 6mm
Port: 2 G1/8
Materials:
Flow control screw: Brass, nickel-plated
Seal: Acrylonitrile Butadiene Rubber
Port: Brass, nickel-plated
Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.
Series VHK begins with a minimum tube O.D of 4mm. The valve direction clearly indicates whether the valve is open or closed (shut to open is counter-clockwise). Classification of knob by colour difference facilitates distinction between two port valves (grey) and three port valves (blue). Thread or one-touch fittings.
Body ported spool valves. Dust-proof rubber gaiter. Mounting via through hole in body.
Base with hose connector, double threaded adaptor, two blanking plugs and 4x 1/4” NPT female outlets.
Series 1
Operating type: lever.
Valve type: 3/2.
Port size: 1/8".
Flow rate Nl/min: 500.
Operating pressures (bar): 0 - 10.
Actuating force (N): 25.
Pneumatic symbol: VN07.
Modular Manifold Kits
Allows a single line of coolant hose to be split off into four separate supplies.
This Master Lock Universal Ball Valve Lockout fits into virtually all manual, quarter-turn ball valve handles to protect against accidental valve opening, and it attaches to the handle to prevent movement. The lockout is suitable for confined spaces and insulated pipes, its ergonomic shape optimises tightening on the valve. It has an aluminium and steel body, and a steel pin which fits behind the valve stopper tab. The adjustable jaws hold the valve in position. The lockout's construction means it can withstand corrosive environments and extreme conditions, and is heat resistant up to 538C.
Ball Valve Gas Approved
Male x Female - BSPP Thread - ISO 228
Manufactured according to EN 12165
Working Temperature -20°C to +150°C
Working pressure 40 bar (580 psi)
Check-Choke Valve
CC01 Series
Push-in fitting. Direction of throttle 1-2. Stainless steel tube locking mechanism and polymer body and release ring.
Oracstar Ball Valve Side Entry (Part 3) 1/2" (High & Low Pressure) Plastic Ballvalve Side Entry (Part 3) Size 1/2" PPS38 Ideal for high and low pressure
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Oracstar Ball Valve Bottom Entry (Part 3) 1/2" (High & Low Pressure) Ball Valve Bottom Entry (Part 3) Size 1/2" Suitable for high and low pressure Instructions included Ideal for plumbing needs
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
The 99223 Throttle Valve Assembly for SG-0102R is a high-quality component designed to enhance the performance and efficiency of your engine. This product range is engineered to provide reliable operation, ensuring optimal airflow and precise throttle control. With its robust construction, it is built to withstand the demands of various applications, contributing to the overall longevity and functionality of your vehicle. By integrating this throttle valve assembly, you can expect improved responsiveness and a smoother driving experience, making it an essential addition for those seeking to maintain or upgrade their engine's performance.
Features:
For Use With: SG-0102R
Applications:
- - Ideal for replacing worn or malfunctioning throttle valves in SG-0102R models, ensuring optimal engine performance.
- - Enhances fuel efficiency by providing precise airflow control, reducing unnecessary fuel consumption.
Brass chrome plated ball valve with lever, full bore. XPress ends for copper/carbon steel/stainless steel tube
Polypipe 12 Port Polypipe Push Fit Steel Manifold Pb12762 PB12762
Polypipe 10 Port Polypipe Push Fit Steel Manifold Pb12760 PB12760
Polypipe 7 Port Polypipe Push Fit Steel Manifold Pb12757 PB12757
Polypipe PB12736 Polyplumb Underfloor Manifold Extension Kit PB12736
Isolation valves to stop the flow in an underfloor heating system for repairs and maintenance.
The Tesla mini ball valve 10 mm fitting is used to stop the flow of gas to allow the user to carry out any required maintenance.
The PlumbRight is a high-quality lever ball valve with a yellow handle to indicate gas supply and is manufactured to EN 331 certification, designed for manufactured gas, natural gas and liquefied petroleum gas (LPG) With lever ball valvesthe flow may be easily adjusted and a full flow through the valve is made possible by the valve being parallel to the pipe. Adjusting to be perpendicular to the pipe will block the flow. Moving the lever between 0 degree and 90 degrees controls the flow.
John Guest Speedfit LowFit™ manifold reducer allows any John Guest Speedfit Underfloor Manifold port to be converted to a LowFit™ connection size of 12mm. Simply push the reducer into the John Guest Speedfit Speedfit port on both flow and return bars.
A 3/4in brass union set for use with hot water circulators.
The Danfoss port "H" motorised valve series, which includes the HSA3 Actuator, is suitable for use with both copper and iron pipes. The motor replacement head for the HS3 Valve bodies is the Danfoss HSA3 Actuator. By purchasing the actuator, you may just swap out the head of the device rather than having to replace the entire thing.
1/2inCHHIGH Pressure Part 1 Ballvalve + 14inCHLEVER Arm H-09101A-1/2ARM
The PlumbRight is a high-quality lever ball valve with a yellow handle to indicate gas supply and is manufactured to EN 331 certification, suitable for manufactured gas, natural gas and liquefied petroleum gas. Lever ball valves enable an easy adjustment of the flow where being parallel to the pipe will allow a full flow through the valve. Adjusting to be perpendicular to the pipe will block the flow. Moving the lever between 0 degree and 90 degrees controls the flow.
Intermediate ball valve for compressed air pipe - Ø 32 mm x 32 mm
Intermediate ball valve for compressed air pipe - Ø 25 mm x 25 mm
Intermediate ball valve for compressed air pipe - Ø 20 mm x 20 mm
Pneumatic electrovalve 24Vdc. Bleeds compressed air, complete with pressure regulator
6mm Outside Diameter, Ball Valve, Type 6560, Push-in, Mini, Brass, Nickel Plated Brass Body, PTFE Seal, Working Temperature -20┬░C to +80┬░C, Maximum Working Pressure 20 bar, Aignep
1/8" BSP Parallel Female, Ball Valve, Type 6710, T Port, Mini, Brass, Nickel Plated Brass Body, PTFE Seal, Working Temperature -20┬░C to +80┬░C, Maximum Working Pressure 20 bar, Aignep
1/2" BSP Parallel Female, Pneumatic Actuated Stainless Steel Ball Valve, Double Acting Actuation, Working Temperature, Actuator -32┬░C to +90┬░C, Valve -20┬░C to +180┬░C, Maximum Working Pressure 69 Bar, Prisma
1/2" BSP Parallel, 3 Piece Full Bore Ball Valve Fitted with a Pneumatic Actuator, Single Acting, ATEX Approved, Stainless Steel Valve Material, Viton Seal Material, Valve Working Temperature -20°C to +200°C, Actuator Working Temperature -32°C to +80°C, Valve Maximum Working Pressure 63 bar, Prisma, Haitima
Vale Mini Female Ball Valve For Gas
Vale® mini female ball valve for gas applications with Industrial Ancillaries. This mini female BSPP thread ball valve comes in BSPP sizes 1/8 to 1/2.
1/4OD SHUT-OFF VALVE POLYPROPYLENE JG SPEEDFIT AIR PRODUCTS
2" BSP Parallel Male x 2" BSP Parallel Female, EN331 Gas Approved Ball Valve, Lever Handle, Brass Nickel Plated, Working Temperature -10┬░C to +80┬░C, Maximum Working Pressure 5 bar, FT Pro
4mm Inlet, 3/2 Function, Pushbutton Actuation, Lateral Connection, Valve, Working Temperature -5┬░C to +70┬░C, Maximum Working Pressure 10 bar, Pneumax