Find Pressure & Vacuum Measuring Products
Replacement Anvils
Spares to suit Oxford/Kennedy Plunger Type Gauges. Steel.
(Dial gauge NOT included)
Replacement styli for Kennedy lever type dial test indicators. Carbide Steel.
301-963 - Stylus to suit old style metric types only.
301-986 - Stylus to suit new style metric types only.
301-986 - Stylus to suit old style imperial types only.
Utility Pressure Gauge suitable for most light duty liquid or gaseous applications.
Commonly used in pneumatics and HVAC.
EN837-1 Accuracy class 2.5
Black steel case with clip in plastic window
Brass/Bronze wetted parts.
Bottom and Centre Back connection
1/4" BSP Thread
Easy Read Dial Gauges and DTI's are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, 'Easy Read' dial for zero setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space.
Features and Benefits
• Shockproof mechanisms for stability and durability
• 'Easy Read' dial for convenience
• Durable matt finish chromed housing and black oxidised limit hand
• Fitted with 1/4" inside diameter centre back lug and 5/16" diameter stem
• Fitted case for easy storage and portability
This two piece set includes a Smile Dial Plunger Type Gauge as well as a lever Switchable Universal 2 Mag Stand.
Features and Benefits
• Mag stand possesses two magnetic faces and a large vee for clamping
• Gauge possesses a matt finish with chromed housings and black oxidised limit hands
• Gauge is fitted with 1/4in. inside diameter, an off-set back lug and 5/16in. diameter stem
• Supplied with both a universal magnetic stand as well as a smile dial plunger type gauge
Typical Applications
• Manufacturing
Standards
• Gauge manufactured to BS 907
32mm (11/4") diameter dial lever type, supplied with dovetail fitting and 6 and 8mm spigot. Matt finish with a chromed housing. Jewelled.
Features and Benefits
• Dial lever type for easy and convenient readings
• Supplied with dovetail fitting (6 and 8mm spigot)
• Matt finish chromed housing
• Jewelled
Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180° of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (metric) or 1/4” (inch) diameter spigot.
29mm 1 1/8" Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A 'datum point' can be set by using a setting ring of a known diameter or a micrometer. ' Zero' the gauge to this datum point by rotating the bezel to align 'zero' with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by 'rocking' the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type - Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
40mm Diameter Face
Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240°. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.
The Kennedy® 'Smile-Dial' plunger type dial gauge has an easy to read 58mm (2,1/4") diameter dial with a matt finish chromed housing and black oxidised limit hands. The mechanism is jewelled to ensure a smooth precise action. Fitted to the back of the 'Smile-Dial' is an off-set lug with 1/4" inside diameter and a 5/16" diameter stem fixing. Manufactured to BS 907.
Graduation: 0.1mm.
Travel: 10mm.
Reading: 0-100.
Use to find profiles or edges and accurately transfer on to material to be cut. Manufactured in high-quality plastic. Max. depth of profile 45mm.
39mm Diameter Face
Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240°. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.
Clock Only
Fitted with a G1/8” brass thread, can be used to measure psi and bar readings and can be fitted directly onto any filter regulator - lubricators. Available in two face sizes (40mm and 50mm), made from tough ABS plastic. Back entry fittings.
High precision 50mm dial indicator with low measuring force and 10mm travel. Rotating bezel with lock for zero setting. Range 0 - 10mm, graduation 0.01mm.
58mm (21/4") Diameter Dial
Matt finish chromed housing and black oxidised limit hands. Fitted with 1/4" inside diameter stem.
Main bodies are machined from high quality brass. Ratchet stylii are fitted and operated throughout 180° of arc. A switch lever isfitted for reversing movement and the dials are rotated for zero setting.
58mm (2 1/4”) Diameter Dial FM/FI Series
Precision plunger dial indicators are suitable for various applications in the workshop or inspection department. All units are supplied with 8mm stems, 3mm diameter carbide ball anvil and standard offset lug backplate.
Accuracy: resolution down to 0.001mm. Calibration certificate supplied with all indicators reading better than 0.1mm.
The Verdict product range offers a selection of high-quality stylus options designed for precision and versatility in various applications. Each stylus is crafted to ensure optimal performance, making them ideal for professionals seeking reliable tools for intricate tasks. With a focus on durability and efficiency, these styluses are suitable for use in a variety of settings, providing users with the confidence to achieve accurate results. The range caters to diverse needs, ensuring that there is a suitable option for every project, enhancing productivity and effectiveness in the workplace.
Applications:
- Ideal for precision marking and engraving on various materials, including metal and plastic.
- Suitable for use in manufacturing environments for quality control and inspection tasks.
The Baty HL series of lever type dial test indicators are top quality, Swiss-made precision instruments. Low inertia jewelled movements and rugged construction make them suitable for universal applications in the workshop and inspection.
HL Series
High sensitivity, repeatability and accuracy. Meet or exceed BS, DIN, Federal and other national standards. Anti-magnetic.
Automatic reverse action stylus - hand always rotates clockwise.
Adjustable bezel and hand for zeroing. Rugged, satin chrome finished body. Three dovetail mountings, top, back and front. Fully jewelled and geared movement. Precision ball bearing mounted, interchangeable carbide point swivels through 240°.
Baty HL indicators are supplied with: 2mm diameter contact point - fitted, contact point key, Dovetail stems 911 and 914 and tough plastic case.
SDS PLUS EXTRA WIDE CHISELSEXTRA WIDE AT 80 MM FOR GENERAL MASONRY WORK INCLUDING BACK BOX CREATION80mm widthForged steelWide flat chisel head - 80mmFor hammer action only
Spare Anvils for Oxford Dial Indicating Bore Gauges
1/8" NPT Male, Hydraulic Accessory, Visual Indicator, Suction, LHA
Features:, The ideal home use monitor, One button control with latest 3rd generation fully automatic measurement technology, Unique A&D latex-free and metal-free SlimFit Cuff (22-32cm), Irregular Heart Beat (IHB) indicator, World Health Organisation (WHO) Blood pressure classification indicator for easy and clear understanding of Blood Pressure readings, 30 reading memory function for recording trending, Average memory reading function, Clinically validated to the world recognised European Hypertension Society (ESH) 2010 protocol, Pack contains free batteries, 5 year warranty for complete peace of mind (based on normal home usage)Extremely accurate Oscillometric BP measurement, first developed and patented by A&D back in 1984.Boasts A&D's IHB (Irregular Heart Beat)/Circadian Rhythm analysis technology, pioneered by A&D in 2001 and now found on our entire range of blood pressure monitors. used worldwide assisting in the opportunistic detection of arrhythmias which include Afib (or Atrial Fibrillation).The device also utilizes the latest 3rd generation technology from A&D, with an easy one button operation incorporating the advantage of automatic fuzzy logic controlled inflation.The UA-611 is clinically validated to the world recognized European Hypertension Society (ESH) guidelines so the user can have complete confidence in their readings.The quality of the UA-611 allows A&D to offer the user a 5 Year warranty (excluding batteries and Cuff).Box Contains:, UA-611 Automatic Blood Pressure Monitor, Latex and Metal Free, SlimFit Cuff (22-32 cm), Instruction Manual, 4 x AA Batteries
05. ‘T’ Series
Indicators have switch lever for reversing the direction of movement, mounted in ball bearings. Fitted with 4mm (metric)/1/4” (inch) dia. top spigot and holder body sideclamp which accepts rods up to 6.5mm/0.256”. Indicator body machined with dovetail to suit attachments.
1/4" BSP Taper Male, Vacuum Gauge, 50mm Gauge Diameter, Bottom Mounting
The Mitutoyo Dial Indicator with a flat back design is an essential tool for precision measurement in various engineering and manufacturing applications. Renowned for their accuracy and reliability, these indicators are ideal for gauging small distances and ensuring quality control in production processes. The robust construction guarantees durability, making them suitable for both workshop and field use. With their user-friendly interface, these dial indicators facilitate quick and easy readings, enhancing efficiency and productivity in any measurement task.
Applications:
- Ideal for precise measurement of small distances and tolerances in mechanical engineering and manufacturing settings.
- Useful for quality control processes to ensure components meet specified dimensions and standards during production.
The Mitutoyo 7321A Deep Throat Dial Indicator Thickness Gauge is designed for precision measurement in various applications, offering a reliable solution for assessing material thickness. With a measuring range of 0-10mm, this gauge ensures accurate readings, making it ideal for professionals in engineering, manufacturing, and quality control. Crafted with high-quality materials, it provides durability and longevity, ensuring consistent performance over time. This product range is essential for those seeking to enhance their measurement capabilities with dependable and precise tools.
Features:
Measuring Range: 0-10mm
Applications:
- Ideal for precise thickness measurements in manufacturing and quality control processes, ensuring components meet specified tolerances.
- Suitable for use in laboratory settings for material testing, allowing for accurate assessment of sample thickness in research and development.
A Mitutoyo USB Input Tool SPC data cable with data push button connector to suit compatible measuring tools.
Features & Benefits:
-2m length cable
-Data button
-USB system for direct connection as a keypad format without software
driver (HID) or as a virtual COM port (VCP) with fixed COM port
assignment in Windows
-Windows 2000/XP/Vista/Windows 7 compatible
1/4" BSP Tapered Male, Flange Type Pressure Gauge, Centre Back connection, Dry Gauge, 50mm Dial Diameter, Working Pressure 0-200 psi, Working Pressure 0-12 bar, FT Pro
Pressure gauge Ø 4 Specifications: EAN code: 8024986599732 Short description: Pressure gauge Ø 4 Quantity per package: 0 Minimum order quantity: 0 Unit of measure: items. Body material Technopolymer Functional denomination Pressure gauges in line Max input pressure (bar) 012 Max temperature (°C) 60 Min temperature (°C) -20 Pecision (%) 0 Product's series Series LINE ON LINE Push-in fitting for pipe (Ø) 4 Suggested tube (Type) Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene Thread type Cylindrical
1/8" BSP Tapered Male, Steel Case, Centre Back Connection, 40mm Diameter, Dry Gauge, 40mm Dial Diameter, Working Pressure 0-30 psi, Working Pressure 0-2 bar, FT Pro
1/8" BSP Taper Male, Vacuum Gauge, 40mm Gauge Diameter, Back Mounting
Gauge & Accessory, Panel Mount Gauge Bracket, Accessory, to Suit 63mm Rear Gauge, Wika
1/4" BSP Parallel Male x 1/4" BSP Parallel Female, Pressure Gauge Accessory, Gauge Snubber, Low Pressure, Brass, Working Pressure 0 to 20 bar, FT Pro
The Mitutoyo 2109A-10 Dial Indicator is a precision measuring instrument designed for accurate and reliable measurement in various applications. With a measuring range of 0-1mm, this product is ideal for tasks requiring meticulous attention to detail. Its robust construction ensures durability, while the shockproof design enhances its resilience in demanding environments. The jeweled bearing mechanism contributes to smooth operation and longevity, making it a trusted choice for professionals seeking high-quality measurement tools. This product range exemplifies Mitutoyo's commitment to precision and performance.
Features:
Measuring Range: 0-1mm
Applications:
- Ideal for precise measurement of small components in mechanical engineering and manufacturing, ensuring accurate tolerances in production processes.
- Suitable for quality control inspections in laboratories and workshops, allowing for reliable assessment of part dimensions and surface flatness.
Used for testing pipework installations prior to the introduction of gas and for checking and setting correct gas pressure. The scale is marked in millibars and adjusts to zero the water level. Capacity 60mb.
The Rothenberger 60 ml manometer fluid is a sufficient amount to fill a 48 inches U-Guage and this coloured liquid is designed to provide a clear visual reading level. This liquid also has anti-freeze in it to tackle the cold and frosty mornings.
The 6297 series DTI universal holder is designed to set the indicators at the desired attitude to the workpiece.
• Designed to set the indicators at the desired attitude to the workpiece.
The Moore & Wright 420 Series Dial Test Indicators have highly precisioned, fully jewelled bearings and carbide points. There are two dovetail clamps on these models. The 420 Series allow automatic reversal of measuring direction and there is a rotating dial for increased ease of use. Styli Length 12mm (1/2in). The Moore & Wright MW420-03 Dial Test Indicators has the following specification Range 0.8mm. Resoultion 0.01mm. Dial Reading 0-40-0. Dial Diameter 25mm.
This manometer offers high accuracy, performance and repeatability. Having a piezoelectric sensor, it offers user selectable measuring units.
It is ideal for applications in industry, laboratories, heating, ventilation and air-conditioning systems for measuring non-corrosive gauge or differential pressures. All instruments feature over range protection to twice the measuring capacity.
11 selectable units: psi, mbar, inH2O, kPa, inHg, mmHg, ozin², ftH2O, cmH2O, kgcm² & bar
Digital display of positive, negative or differential pressure
2 x 4.5mmØ barbed lugs for 3.18mmØ ID tubing
Min/max & average measurements
Data hold freezes displayed readings
35mm LCD display with backlight and function indicators
Impact-resistant ABS plastic case with function buttons
Zero, offset and data compensation
Overload and underload warning displays Err 1 or Err 2
Auto power off after 25 minutes of no activity – can be user disabled
Low battery indicator
Supplied with 2 x 5mmØ x 30mm soft connection tubing, 2 x 5mmØ x 30mm hard connection tubing, 2 x 4.5mmØ metal barbed lugs for tubing, soft carry case and battery
Introducing the Anvil Spring Series by Mitutoyo, a premium range designed for precision measurement and quality assurance in various applications. This product range is engineered to deliver exceptional accuracy and reliability, making it an essential tool for professionals in engineering, manufacturing, and quality control. With a focus on durability and performance, the Anvil Spring Series ensures consistent results, enhancing productivity and efficiency in any workspace. Trust in Mitutoyo's commitment to excellence and elevate your measurement capabilities with this outstanding product range.
Applications:
- Ideal for precision measurement tasks in engineering and manufacturing environments, ensuring accurate assessments of spring characteristics.
- Suitable for quality control processes, allowing for consistent testing of spring performance and compliance with specifications.
1/8" BSP Tapered Male, Steel Case, Centre Back Connection, 50mm Diameter, Dry Gauge, 50mm Dial Diameter, Working Pressure 0-15 psi, Working Pressure 0-1 bar, FT Pro
1/8", Hydraulic High Pressure Filtration, Clogging Indicator, Visual for Series PE, UFI
1/4" BSP Tapered Male, Vacuum, Bottom Connection, Dry Gauge, 50mm Dial Diameter, Gauge Pressure -30 Inches of Mercury, Maximum Working Pressure -1 bar, FT Pro
1/4" BSP Taper Male, Vacuum Gauge, 50mm Gauge Diameter, Back Mounting
Utility Pressure Gauge suitable for most light duty liquid or gaseous applications.
Commonly used in pneumatics and HVAC.
EN837-1 Accuracy class 2.5
Black steel case with clip in plastic window
Brass/Bronze wetted parts.
Bottom and Centre Back connection
1/4" BSP Thread
Differential Equipment & Accessory, Differential Pressure Gauge, Grade WS, AO, AA, AC AND ACS Filtration, Domnick Hunter
The Mitutoyo 2046A Lug Back ISO Type Dial Indicator is a precision measuring instrument designed for accurate and reliable measurement in various applications. With a measuring range of 0-10mm, this product range is ideal for professionals seeking to ensure high-quality standards in their work. Renowned for their durability and precision, these dial indicators provide clear readings, making them essential tools in engineering, manufacturing, and quality control. Their robust construction ensures longevity, while the user-friendly design enhances efficiency in measurement tasks.
Features:
Measuring Range: 0-10mm
Applications:
- Ideal for precise measurement of small components in mechanical engineering and manufacturing, ensuring accurate tolerances within a 0-10mm range.
- Suitable for quality control inspections in workshops, allowing for quick and reliable checks of part dimensions to maintain product standards.
1/8" BSP Parallel Male x 1/8" BSP Parallel Female, Pressure Gauge Accessory, Gauge Snubber, Low Pressure, Brass, Working Pressure 0 to 20 bar, FT Pro
The Anvil Stopper Series 293 by Mitutoyo is designed to enhance precision and efficiency in measurement applications. This product range is crafted with a focus on quality, ensuring reliable performance in various industrial settings. The Anvil Stoppers are essential for achieving accurate measurements, providing users with the confidence needed for critical tasks. With their robust construction, they are built to withstand the rigours of daily use, making them a valuable addition to any workshop or laboratory. Experience the benefits of enhanced measurement accuracy with the Anvil Stopper Series 293.
Applications:
- Ideal for precise measurement applications in manufacturing and engineering, ensuring accurate readings by preventing unwanted movement of the measuring instrument.
- Useful in quality control processes, allowing for consistent and repeatable measurements by securely holding the anvil in place during inspections.
Utility Pressure Gauge suitable for most light duty liquid or gaseous applications.
Commonly used in pneumatics and HVAC.
EN837-1 Accuracy class 2.5
Black steel case with clip in plastic window
Brass/Bronze wetted parts.
Bottom and Centre Back connection
1/4" BSP Thread
The Mitutoyo 513-908-10E Horizontal Type Dial Test Indicator with Magnetic Stand is designed for precision measurement in various engineering and manufacturing applications. This product range is renowned for its exceptional accuracy and reliability, making it an essential tool for quality control and inspection tasks. The robust construction ensures durability, while the magnetic stand provides stability during use, allowing for easy positioning and hands-free operation. Ideal for professionals seeking to enhance their measurement capabilities, this range combines functionality with high-quality craftsmanship.
Applications:
- Ideal for precision measurement and alignment tasks in mechanical engineering and manufacturing settings, ensuring components meet strict tolerances.
- Useful for quality control inspections, allowing operators to quickly assess the flatness and roundness of parts using the magnetic stand for stable positioning.
1/8" BSP Tapered Male, Steel Case, Centre Back Connection, 40mm Diameter, Dry Gauge, 40mm Dial Diameter, Working Pressure 0-100 psi, Working Pressure 0-6 bar, FT Pro
Utility Pressure Gauge suitable for most light duty liquid or gaseous applications.
Commonly used in pneumatics and HVAC.
EN837-1 Accuracy class 2.5
Black steel case with clip in plastic window
Brass/Bronze wetted parts.
Bottom and Centre Back connection
1/4" BSP Thread
The Anvil Nut (2) for 511 by Mitutoyo is designed to enhance precision and reliability in measurement applications. Crafted with high-quality materials, this product ensures durability and consistent performance, making it an essential component for professionals seeking accuracy in their work. The Anvil Nut is engineered to facilitate seamless integration with compatible Mitutoyo instruments, thereby improving overall functionality. This product range is ideal for those who demand excellence in their measurement tools, providing the assurance of quality and dependability in every use.
Applications:
- Ideal for replacing worn or damaged anvil nuts in Mitutoyo 511 measuring instruments, ensuring accurate measurements.
- Facilitates the maintenance and longevity of precision tools, contributing to consistent performance in engineering and manufacturing environments.
1/8" BSP Taper Male, Vacuum Gauge, 50mm Gauge Diameter, Bottom Mounting
Utility Pressure Gauge suitable for most light duty liquid or gaseous applications.
Commonly used in pneumatics and HVAC.
EN837-1 Accuracy class 2.5
Black steel case with clip in plastic window
Brass/Bronze wetted parts.
Bottom and Centre Back connection
1/4" BSP Thread
Gauge & Accessory, Panel Mount Gauge Bracket, Accessory, to Suit 100mm Rear Gauge, Wika
Introducing the Gauge Tester from Mija, a reliable tool designed to enhance precision in various applications. This product range is crafted to meet the needs of professionals and enthusiasts alike, ensuring accurate measurements and consistent performance. With a focus on quality and durability, the Gauge Tester is built to withstand rigorous use while delivering dependable results. Ideal for those who require meticulous attention to detail, this tool supports a wide array of tasks, making it an essential addition to any toolkit. Experience the benefits of enhanced accuracy and reliability with the Gauge Tester.
Applications:
- Ideal for testing and calibrating various types of gauges in automotive and industrial settings, ensuring accurate readings and optimal performance.
- Useful for maintenance professionals to diagnose issues in pressure and temperature measurement systems, enhancing reliability and safety in operations.
The Dial Indicator Spindle Cap for Series1 is an essential component designed to enhance the functionality and precision of dial indicators. Crafted with a focus on quality and durability, this product ensures reliable performance in various measurement applications. Its robust construction provides stability and protection, making it ideal for both professional and hobbyist use. The sleek black finish not only adds a touch of sophistication but also contributes to its resilience in demanding environments. This product range is perfect for those seeking accuracy and longevity in their measuring tools.
Features:
Colour: Black
Applications:
- Ideal for protecting the spindle of dial indicators in precision measurement applications, ensuring accurate readings by preventing dust and debris accumulation.
- Suitable for use in various industrial settings, including manufacturing and quality control, where maintaining the integrity of measuring instruments is crucial.
The Bezel Clamp for Dial Gauge Metric, Series 2/3/4, is designed to enhance the precision and reliability of your measuring instruments. This product range ensures secure attachment and stability for dial gauges, facilitating accurate readings in various applications. Crafted with quality materials, these clamps provide durability and consistent performance, making them an essential accessory for professionals seeking to maintain high standards in measurement. Ideal for use in engineering, manufacturing, and quality control, they contribute to improved efficiency and accuracy in your work.
Applications:
- Ideal for securing dial gauges in place during precision measurement tasks, ensuring accurate readings in engineering and manufacturing environments.
- Facilitates easy adjustment and locking of the bezel, allowing for quick calibration and setup in quality control processes.
1/4" BSP Tapered Male, Vacuum, Centre Back Connection, Dry Gauge, 50mm Dial Diameter, Gauge Pressure -30 Inches of Mercury, Maximum Working Pressure -1 bar, FT Pro
1/4" BSP Tapered Male, Flange Type Pressure Gauge, Centre Back connection, Dry Gauge, 50mm Dial Diameter, Working Pressure 0-160 psi, Working Pressure 0-10 bar, FT Pro
Gauge has rubber boot for protection during use and transportation. 0–10 bar, 0–50 psi 3/4" BSP tap connector
The Centre Pinion Dial Indicator Series 2 by Mitutoyo is designed for precision measurement in various engineering and manufacturing applications. Renowned for its exceptional quality, this product range offers reliable performance, ensuring accurate readings for critical tasks. Ideal for professionals seeking to enhance their measurement capabilities, these dial indicators facilitate easy monitoring of small dimensional changes. With a focus on durability and user-friendly operation, the Centre Pinion Dial Indicator Series 2 is an essential tool for achieving high standards in quality control and inspection processes.
Applications:
- Ideal for precise measurement of small components in mechanical engineering and manufacturing settings, ensuring accurate alignment and fit.
- Useful in quality control processes to verify the dimensional accuracy of parts, helping to maintain high standards in production.
U-Wave is a wireless data communication system that collects data and provides detailed analysis for Micrometers.
Features & Benefits:
-Transmits data from Mitutoyo Digimatic micrometer to software such as Excel or Notepad via wireless communication
-Saves time and eliminates misinput which increases efficiency
-Measurement data can be managed centrally
-U-Wave immediately transmits the measurement data to your PC
1/4" BSP Parallel Male, Welding Gauge, Oxygen, Bottom Connection, Dry Gauge, 50mm Dial Diameter, Working Pressure 0-160 psi, Working Pressure 0-10 bar, FT Pro
