Find Calipers Products
Solid nut.
Points are hardened and ground to allow for marking out.
The nominal size is distance between the centre of the nut and screw or roller and the working ends of the legs.
Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.
The ABS AOS caliper has no limit to response speed and allows you to take reliable measurements. This caliper comes complete with the same AOS (Advanced Onsite Sensor) induction type encoder used in top-of-the-line ABS coolant-proof calipers.
Features and Benefits
• The ABS (ABSOLUTE) scale requires no origin setting after power-on
• The slider has been manufactured to provide a comfortable, smooth and stable operation
• High contrast LCD with 9mm character height to alleviate fatigue
• Electromagnetic induction type ABS encoder allows this caliper to be used without the concern for contamination on the scale face during measurement
• The detection signal is still reliable when dirty
• Long battery life
Adjustable Point
Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. Each firm joint caliper has an adjustable ground point which can be retracted for storage and the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.
IP67 digital calipers complete with internal, external, height and step measurement (quadri feature).
Features and Benefits
• LCD display which is easy to read
• Resistant to water, oil, dust and coolant - Ideal for tough workshop applications
• Long battery life
• Zero setting
• Origin setting with intelligent memory that retains this setting even with the power off
• Inch/metric conversion
Notes
• Extra batteries available - Order Code ENR9040150K
• Non-Output
This vernier caliper with thumb clamp only moves when you depress the spring-loaded thumb grip.
14° vernier face angle. Incorporates Quadri feature.
MW110 Basic Line Digital Calipers feature 4 way measurement with mm/inch measurement function settings with zero point at any position and thumb wheel for easy adjustment. They also feature a robust construction with all metal parts being made of hardened steel and supplied in a handy case for easy and safe storage.
Features and Benefits
• 4 way measurement
• Large LCD display for easy reading
• metric and imperial measurement functions (mm/inch)
• Robust construction with hardened steel parts
• Thumb wheel for fine adjustment
• Suppiled in a handy case for safe storage
Notes
• Extra batteries available - Order Code EDI -904-4000K
The Polycal Digital Caliper from Senator is ideal for taking outside, inside, step and depth measurements. Functions include measurement conversion in inches, millimetres and fractions.
Features and Benefits
• Outside, inside, step and depth measurements
• Measurement conversion in inches, millimetres and fractions
Standards
• EN 61326-1:2013 and EN 61326-2-2:2013
Notes
• Battery Replacement: Edison Lithium Coin Battery CR2032
A large headed nut and screw assembly provides a firm and rigid friction joint, with no play. Manufactured from polished tool steel.
Size - 200mm/ 8inch or 300mm/ 12inch.
The sizes listed are the effective leg length which is measured from the joint assembly.
This Digital External Caliper provides precise measurement for a range of items, ideal for professional and industrial use. Designed to support both imperial and metric systems, it offers unmatched convenience and ease of use. It includes a spring-loaded jaw for consistent measuring force and robust alloy jaws with a durable chrome finish. A large LCD display ensures clear and accurate readings, with seamless millimetre, inch, and fraction conversions. Perfect for external and outside odd leg measurements, this tool delivers reliability and precision, making it an essential for a variety of applications.
Features and Benefits
• Equipped with a spring-loaded jaw to ensure consistent measuring pressure
• Boasts a high-visibility LCD screen for easy-to-read measurements
• Constructed with durable alloy jaws coated in a protective chrome finish
• Provides quick conversions between millimetres, inches, and fractions for versatile use
Typical Applications
• Outside odd leg measurements
• External measurements
Notes
• Battery type CR2032 - DUR9040221K or ENR9040240K
DURABLE: This 150mm (6") digital vernier caliper is hard wearing and made from durable composite plastic. USEFUL FUNCTIONS: It has a range of useful functions including a metric/imperial scale, a zero display and auto-off functions.
High grade carbon steel. For marking out and measuring internal and external features. Accurately ground points and quick split nut adjustment. Lengths: spring divider 202mm, internal spring caliper 180mm, external spring caliper 180mm.
Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.
Features and Benefits
• High quality polished steel with ground finished points
• Adjusting screw mounted across the legs for setting distance between points
• A light centre punch mark on the work keeps pivot leg in the centre while marking
• Ideal for use in scribing arcs and circle applications
Equipped with characters supplied in a new easy read font. These calipers allow you to take reliable and accurate measurements.
Guaranteed product quality.
Standard calipers offering easy adjustment and reliable measurements, manufactured from corrosion free steel for added durability.
Features and Benefits
• Made of hardened corrosion free steel for added strength and durability
• 14° vernier face angle provides easy reading
• Thumb wheel and locknut for easy adjustment
• Incorporates Quadri feature
Standards
• Meets DIN862 standards
IP54 specification dust and splash proof Digitronic caliper allowing for outside, inside, depth and step (4 way) measurements. Constructed from stainless steel for added robustness on the job and supplied in a durable carrycase for easy portability and storage.
Features and Benefits
• Water and dust resistant to IP54 specification
• mm/inch conversion for easy measurements
• Patented ceramic capacitive sensor
• Large LCD display for easy to read results
• Thumb roller for easy and precise slider movement
• Stainless steel construction for added durability
Specifications
• CR2032 battery
• Accuracy to DIN 862
• Resolution: 0.01mm/0.0005"
Typical Applications
• Engineering
For measuring to the inside or outside from the centre of an item. With locating spur and adjustable point.
These are a standard type of vernier caliper that offer you the following benefits:
- Main scale and vernier scale satin chrome finish gives you high readability.
- Raised sliding surfaces.
Standard Vernier Calipers with knurled locking nut.
Features and Benefits
• Give four types of reading - inside, outside, depth and step
• Dual reading scale in metric and imperial
• 14° bevelled vernier scale to reduce parallax reading error
• Manufactured in satin finish from hardened stainless steel for rigidity
Standards
• Conform to DIN 862
This Faithfull D.I.Y Vernier Caliper is manufactured from mild steel, with dual reading in imperial and metric. The universal three-way measurement facility enables readings in external, internal, and depth modes. The caliper's sliding thumb-lock feature allows easy, quick, and precise measurements to be taken. The metric and Imperial dual reading comes with a handy locking function, the dual reading comes in 1.0mm and 0.16in increments. Range 125mm (5in).
With a spring joint - bow spring ensures uniform tension over working range. Centrally mounted adjustment screw offers finer setting, than the firm 'joint type'.
Spring divider to measure distance between two points. Suitable for transferring or comparing measurements directly, or for scribing an arc, radius or circle. Adjusting washer and nut allow fast and positive adjustment. Brushed metal finish.
Locking wing divider to measure between two points. Suitable for transferring or comparing measurements or for scribing an arc, radius, or circle, features adjustment screw for fine adjustments. Brushed metal finish.
The Faithfull Internal Spring Calipers, have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.
This caliper benefits from a polycarbonate frame, plus depth rod. 40mm jaw length and comes in a vinyl pouch. 4-way measurement with an accuracy of 0.2mm /0.008". Non-output type. Functions: mm/inch, zero setting, Absolute/incremental measurement.
Resolution: 0.01mm/0.0005".
Extra batteries available - Order Code EDI -904-3240K
Rack covers prevent dust from fouling teeth of racks.
All measuring faces are precision ground and micro lapped for absolute inside, outside, depth and step readings.
Manufactured to DIN 862.
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly providing a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.
These high-quality digital calipers are designed for outside and inside use, with depth and step measurements. The calipers offer a high-accuracy reading of +/- 0.03mm for quality measuring, and with an LCD display, the readings are easy and accessible to read quickly.
Features and Benefits
• Stainless Steel Blade and Jaws - made to last
• Metric and Imperial Scales
• LCD Display
• Highly accurate to +/- 0.03mm
• Absolute and relative measuring
Typical Applications
• Designed for inside and outdoor use
Introducing the Vinyl Case designed specifically for 150mm/6" Vernier Calipers, a reliable solution for protecting your precision measuring tools. Crafted from durable vinyl, this case ensures that your caliper remains safe from dust, moisture, and accidental damage, extending its lifespan and maintaining accuracy. The lightweight yet robust design makes it easy to transport, while its tailored fit provides optimal protection. Ideal for professionals and hobbyists alike, this case enhances the usability of your vernier caliper, ensuring it is always ready for precise measurements.
Features:
Material: Vinyl
Applications:
- Protects and stores 150mm/6" Vernier Calipers, ensuring they remain free from dust and damage during transport or storage.
- Lightweight and durable vinyl material makes it ideal for use in workshops, laboratories, and fieldwork, providing easy access to precision measuring tools.
The Faithfull External Spring Calipers have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.
A large headed nut and screw assembly provides a firm and rigid friction joint, with no play. Manufactured from polished tool steel.
Sizes available: 6"/150mm or 12"/300mm.
The sizes listed are the effective leg length which is measured from the joint assembly.
The DML DC04150L Left Handed Digital Caliper is expertly designed to provide precise measurements for a variety of applications. This product range is ideal for professionals and hobbyists alike, offering a user-friendly digital display that ensures accuracy and ease of use. Crafted with quality materials, these calipers are built to withstand regular use while delivering reliable performance. Whether for engineering, woodworking, or DIY projects, this range enhances measurement efficiency, making it an essential tool for anyone seeking precision in their work.
Features:
Display Type: Digital
Applications:
- Ideal for precise measurements in woodworking and metalworking, allowing left-handed users to easily read and operate the digital display.
- Suitable for educational settings, enabling students to accurately measure objects and understand measurement concepts with a user-friendly digital interface.
The Rotur Inside/outside caliper can be used with workpieces up to 7 inches in diameter. The straight end can be used to measure the internal dimensions of narrow projects such as vases and goblets. To get precise dimensions of your workpiece, simply measure the exposed end whilst the other is still in contact with the work. For repeatable measurements, the calipers position can be locked by tightening the adjuster screw. The ends of the calipers wont scratch the workpiece because they are rounded.
SKU: CIO7
The Faithfull Spring Dividers have polished natural steel finish legs made of flat stock. They are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.
Coolant-Proof digital calipers available in a range of sizes which can be used for inside, outside, depth and step measuring.
Features and Benefits
• Coolant, water and dust proof to IP67 level
• Large LCD display
• Fast response speed
• Dual readout in mm and inch
Approvals
• REACH
• ROHS
Standards
• EN 61326-1:2013
• EN 61326-2-2:2013
Centrally mounted adjustment screw.
Manufactured from polished tool steel.
Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.
Solid nut.
27083
Non-metallic vernier caliper for inside/outside depth measurements with millimetre/inch display.
Measuring range: 150mm/6”.
Scale bar: 1mm (1/16”).
Vernier interval: 1mm (1/16”).
The Moore & Wright Firm Joint Jenny Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The leg which holds the round adjustable hardened point is offset and model 341 has a locating spur on the straight leg. The sizes listed are the effective leg length which is measured from the joint assembly. Note: firm joint caliper capacities are generally 1/3 greater than the effective leg length.
The Moore & Wright Firm Joint Inside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly to provide a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Inside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.
The Faithfull Fixed joint Jenny Calipers are specifically designed to locate the centre of a round or square section of steel. The leg that holds the adjustable point is offset with the locating lug incorporated in the straight leg. Also known as Hermaphrodite calipers. Range 150mm (6in).
Leg type dial calipers used for measuring diameters and narrow grooves in hard to reach places.
Internal specifications: range: 55 - 75mm, graduation: 0.01mm, groove depth: 8mm, groove width: 3mm, maximum reach: 100mm.
External specifications: range: 0 - 20mm, graduation: 0.01mm, groove depth: 6mm, groove width: 3mm, throat depth: 60mm.
The Moore & Wright Spring Joint External Calipers have a bow spring to ensure uniform tension over the working range. They have a centrally mounted adjustment screw offering a finer setting than firm joint type calipers. These spring joint external calipers conform to BS3123 standards.
This 76mm handy pocket-sized caliper is manufactured from a lightweight non-marring carbon fibre material. The digital selection button enables readings to be displayed in either metric or imperial format and will provide precision readings from 0.1mm and 0.01in. The calipers have an easy to read clear liquid crystal display and can perform internal external and step measurement functions. A convenient pocket clip is provided to help keep the calipers close at hand and safe. The ideal tool for measuring objects internal and external diameters or lengths up to 76mm (3”) Measurements are shown on a digital display screen or on the clearly marked rule Carbon fibre composite Internal and external measurements Easy to read screen Metric and imperial measurements Accuracy: +/- 0.2mm Auto-off Battery included Specifications: Measuring range: 0-75mm (0-3in) Resolution: 0.01mm (0.0005in) Accuracy: ± 0.2mm (0.001in)
The Moore & Wright 100 Series Vernier Calipers have a standard workshop model design. They are made of hardened alloyed stainless steel and have a chromed scale with engraved graduations. The calipers allow 4-way measurement and the measuring surface is micro-lapped. The calipers are manufactured to DIN 862 standards. Supplied in a plastic box.
The Moore & Wright Dial Caliper makes measurement easy with a simple, shockproof adjustable dial for quick and convenient zero setting. Made of Stainless Steel with a blue anodized bezel.
The Moore & Wright MW110-15DPC Polycarbonate Digital Caliper is designed for precision measurement in various applications, making it an essential tool for professionals and hobbyists alike. Constructed from durable polycarbonate, this caliper offers a lightweight yet robust solution for accurate readings. With a digital display, users can easily read measurements, enhancing efficiency and reducing the risk of errors. The versatile measurement range accommodates both metric and imperial units, ensuring adaptability for diverse tasks. This product range exemplifies quality and reliability, making it a valuable addition to any toolkit.
Features:
Material: Polycarbonate
Display Type: Digital
Measurement Range: 0-6in, 0-150mm
Applications:
- Ideal for precise measurements in engineering and manufacturing settings, ensuring accuracy within 0.01mm for detailed work.
- Suitable for hobbyists and DIY enthusiasts for measuring small components in woodworking, metalworking, or model making projects.
Moore & Wright Water Resistant Series Digital Callipers are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch, absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch. Manufactured to DIN 862 standards, and are water and dust resistant to IP54 specifications.Supplied with a CR2032 battery.
The Starrett Fractional Display Caliper is lightweight, comfortable, and easy to use. Made from hardened stainless steel, it has a slim profile and a clear LCD display, reads 0.01mm, .0005in or 1/64in. The display includes function buttons for zeroing and unit switching (mm, inch, F). A fine adjustment thumb wheel allows for easy measuring and a lock screw to secures the slide position. To save battery life it has an auto-off after 5 minutes. It also features a low battery warning system with flashing display and a USB port for data output. Comes with: a battery cover wrench for easy access and a hardwearing case. Conforms to DIN862 standard. Specifications: Power: Single SR44/LR44 Long-life Battery.Max. Measuring Speed: 1.5m/sec or 60in/sec.
The Moore & Wright Spring Joint Internal Calipers are manufactured from polished tool steel. Their bow spring ensures uniform tension over the working range. The adjustment screw is centrally mounted. These spring joint internal calipers conform to BS3123 standards.
The Spring/PH350 product range by Mitutoyo is designed to deliver exceptional precision and reliability for various measurement applications. Renowned for their high-quality construction, these products ensure accurate performance, making them ideal for professionals in engineering and manufacturing sectors. The Spring/PH350 range is engineered to meet rigorous standards, providing users with the confidence needed for critical measurements. With a focus on durability and ease of use, this range enhances productivity and efficiency in any workspace, making it a valuable addition to your measurement tools.
Applications:
- Ideal for precision measurement tasks in mechanical engineering and manufacturing environments, ensuring accurate spring force assessments.
- Suitable for quality control processes, allowing for the verification of spring specifications and performance in various applications.
Measures 0 to 6"/0 to 150mm with 0.0005"/0.01mm resolution and up to 0.001"/0.03mm accuracy for precise measurements.
Stainless-steel frame and slide for durability and corrosion resistance, thumb wheel slide control, round depth rod.
LCD for viewing inch/mm measurements, TESA TLC data output port.
Compatible with TESA TLC wireless data collection systems (sold separately). Meets ISO13385-1 dimensional standards and Ingress Protection certified IP65 against dust and liquids.
Features:
Large LCD screen with 7/16 inch digits.
More than 12,000 hours battery life (3 years).
ABS measuring mode.
Round depth rod and thumb wheel.
Specifications:
Range: 0-6"/ 0-150mm.
Resolution: .0005"/ 0.01mm.
Type: Twin-Cal; IP40.
SPC Output: Yes.
General purpose calipers with thumb wheel fine adjustment. Can be used for internal, external and depth measurements. Graduations shown in metric (cm/mm) and imperial inch marks.
The absolute zero feature enables an (ABS) 'origin point' to be set anywhere within the measuring range. When this point is established, the distance from this position will always be displayed, the intelligent memory retains the 'origin point' even when powered off. SPC output and inch metric conversion. Error-free operation. Infinite response speed. Large LCD display. Incremental feature.
Complete with power supply battery 1x SR44.
Resolution: 0.01mm/0.0005".
Extra batteries available - Order Code EDI -904-4000K.
The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS / INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery.
Strong but flexible bow spring calipers.
Centrally located adjustment screw gives smooth and precise action.
Fulcrum stud hardened, with smooth bearing surface.
Legs in polished natural steel finish are made of flat stock and are carefully balanced.
Solid nut permits fast and accurate measurement.
These calipers have the highest IP67 standard protection against liquids and dust and a large LCD screen ever with 11 mm digits. Soft touch feature for smooth measurements. ABS measuring mode.
Resolution 0.01mm / 0.0005"
Protection IP67
The Rotur Double-Ended Caliper can be used with workpieces up to 7 inches in diameter. To get precise dimensions of your workpiece, simply measure the exposed end whilst the other is still in contact with the work. For repeatable measurements, the calipers' position can be locked by tightening the adjuster screw. The ends of the calipers won't scratch the workpiece because they are rounded.
SKU: CDE7
Mitutoyo 500-181-30 (0.01mm) Digital ABS Caliper Blade w/o output 0-150mm
Mitutoyo 500-184-30 (0.01mm) Digital ABS Caliper Rod w/o output 0-150mm
This Faithfull Vernier Caliper is manufactured from hardened stainless steel with dual reading in Imperial to 0.001in and in Metric to 0.02mm. The universal four-way measurement facility enables reading in external, internal, depth and step modes. The sliding thumblock feature easily allows quick and precise measurements to be taken. The satin finished scales and beam ensure fast, easy and accurate readings. Range 150mm (6in). Graduations 0.02mm and 0.001in increments.
Hardened and tempered stainless steel digital caliper with satin finish.Large LCD display with 11mm high figures for ease of reading.Metric and Imperial calibration with conversion between the two.Zero setting control allows for comparative measurement.Supplied in storage case.1yr guarantee.
The Rotur Small Turners Caliper Set includes a 4" Double ended caliper and a 6" Inside/outside caliper.To get precise dimensions of your workpiece, simply measure the exposed end whilst the other is still in contact with the work. For repeatable measurements, the calipers position can be locked by tightening the adjuster screw. The ends of the calipers wont scratch the workpiece because they are rounded.
SKU: CDIO46
The Moore & Wright 56R Spring Joint Jenny Caliper is manufactured from polished tool steel and the marking leg has been hardened to over 550Hv at the point. It is fitted with a bow spring that ensures uniform tension over the working range and a centrally mounted adjustment screw that offers finer setting than firm joint type. Also known as Hermaphrodite calipers. Size 150mm (6in).
The MW-CDP-M series Digital Calipers are a must have for every workshop, available with 4-way measurement and supplied with a locking screw. The resolution of 0.1mm allows for precise measurements.
• Plastic Dial Caliper
• Range: 0-150mm
• Manufactured from glass reinforced nylon material
• Highly durable design
• Plastic depth rod
Metric & Inch Reading - Graduation: 0.02mm/0.001"
Fine adjustment allows improved sensitivity of slider movement. 14° vernier face angle.
Incorporates Quadri feature. Satin chrome finish with clear easy read graduations.
The Moore & Wright Digital Dial Caliper is a precision measuring tool designed for professionals who demand accuracy and reliability. This waterproof caliper features a circular LED colour screen with a backlit display, ensuring visibility in any lighting condition. With an IP67 rating, it’s protected against dust and water, making it ideal for challenging environments.
Manufactured from polished steel with ground finished points. Calipers are used for taking external measurements, and for comparing distances or sizes.
The MW-620-DIP series Digital Height Pre-Setter powers on automatically when the measuring surface moves. It has an accuracy of 0.005mm/0.0002″ and resolution 0.001mm/0.00005â€.
• Digital Height Pre-Setter
• Accuracy: 0.005mm/0.0002″
• Repeatability: 0.003mm/0.0001″
• Resolution: 0.001mm/0.00005â€
Spring for access flap, for recyclable waste collectors, silver. Supplied = assembled. Category = waste collectors and ashtrays. Product type = mounting materials. Material = steel. Colour = silver.
The Data Hold Unit for Digital Calipers is an essential accessory designed to enhance the functionality of digital calipers. This product range is engineered to provide users with reliable data retention, ensuring that measurements can be easily captured and reviewed without the need for constant recalibration. Crafted with precision and quality in mind, these units are compatible with various digital caliper brands, making them a versatile addition to any toolkit. Ideal for professionals and hobbyists alike, they streamline measurement processes, improving efficiency and accuracy in various applications.
Applications:
- Enables easy data capture and retention for precise measurements taken with digital calipers, enhancing accuracy in engineering and manufacturing tasks.
- Facilitates efficient data transfer to computers or other devices for analysis and record-keeping, streamlining quality control processes in various industries.
The Moore & Wright MW110-15DLJ Digital Long Jaw Caliper is designed for precision measurement in various applications, making it an essential tool for professionals and enthusiasts alike. This product range offers a reliable and user-friendly digital display, ensuring accurate readings with ease. Crafted with quality materials, these calipers are built to withstand the rigours of daily use while providing consistent performance. Ideal for engineering, woodworking, and metalworking tasks, they enhance efficiency and accuracy, making them a valuable addition to any toolkit.
Features:
Display Type: Digital
Applications:
- Ideal for precise measurements in engineering and manufacturing settings, ensuring accuracy in component fabrication and assembly.
- Suitable for use in educational environments, allowing students to learn and practice measurement techniques with a user-friendly digital display.
The Mitutoyo Digital ABS Caliper range is designed for precision measurement, offering exceptional accuracy and reliability for various applications. Constructed from durable ABS material, these calipers are built to withstand challenging environments, featuring an IP67 rating that ensures protection against dust and water. With a digital display, users can easily read measurements, enhancing efficiency in both professional and DIY settings. This product range is ideal for those seeking high-quality tools that deliver consistent performance and ease of use in measuring lengths up to 600mm.
Features:
Display Type: Digital
Material: ABS
IP Rating: IP67
Measurement Range: 0-600mm
Applications:
- Ideal for precise measurements in industrial environments, thanks to its IP67 rating, which protects against dust and water ingress.
- Suitable for use in workshops and laboratories where accurate measurements of up to 600mm are required, with a resolution of 0.01mm for detailed assessments.
Measures 0 to 8" and 0 to 200 mm with 0.0005" and 0.01 mm accuracy
IP 67-certified, to ensure protection against coolant, water, dirt, and dust
Easy-to-read LCD with 0.310" high characters
Hardened stainless steel bar for corrosion resistance and long life
Linear accuracy meets international DIN 862 standards
The 1108 Digital Vernier Caliper is the best selling Insize caliper, with inside and outside measuring jaws. Available with or without thumb roller for fine adjustment and high speed measurement. The Caliper is made of stainless steel for longer tool life and durability from machine shop wear. With optional SPC cable data output. Sizes range up to 300mm (12”).
• Resolution: 0.01mm/0.0005”.
• Button function: on/off, zero, mm/inch.
• Automatic power off (move digital unit to turn on).
• Battery CR2032.
• Data output.
• Made of stainless steel.
• Optional Accessory: data output cable (code7302-SPC5A).
The Mitutoyo 530-100 Vernier Caliper is a precision measuring tool designed for accurate and reliable measurements within a range of 0-100mm. Renowned for its exceptional quality, this product range is ideal for professionals and enthusiasts alike, ensuring precise readings for various applications. The caliper's robust construction guarantees durability, making it suitable for both workshop and field use. With its user-friendly design, it enhances measurement efficiency, providing confidence in results across a variety of tasks, from engineering to woodworking.
Features:
Measurement Range: 0-100mm
Applications:
- Ideal for precise measurements in mechanical engineering and manufacturing, ensuring accurate component fitting and assembly.
- Suitable for educational purposes in physics and engineering courses, allowing students to practice and understand measurement techniques.
Mitutoyo 500-197-30 ABSOLUTE AOS Digimatic Caliper 0-200mm (0-8")