Find Threadlockers and Gasket Sealants Products
Resistant to commonly used fuels, lubricants and coolants, is non-corrosive and free
from abrasive fillers.
100ml - Tube.
500ml - Tin.
LOCTITE® 243 is a medium strength threadlocking adhesive that is ideal for oil tolerance, as well as all metals.
Features and Benefits
• Tolerates minor contamination by industrial oils and can be used to secure and seal bolts, nuts and studs
• Prevents loosening due to vibration that may occur on machinery, for example on pumps, gear boxes or presses
• The general purpose adhesive works on all metals, including passive substrates such as plated surfaces, aluminium and stainless steel
Typical Applications
• Ideal for parts that need subsequent dismantling
• Oil industry
• Metal industry
Approvals
• NSF food approved
Leading non-setting gasket and sealing compound in use world-wide. Non-hardening and non-setting allows for unlimited assembly time. Vibration-resistant. Allows metal to metal contact.
Features and Benefits
• Resistant to oils, lubricants and fuels
• Withstands rapid variations in temperature with ease
• Vibration resistant
• Flame, dust and moisture proofing properties
Notes
• Should not be used on: sheet metal parts; assemblies where soft thick gasketing material was specified; or as a gap filler
577 is a thread sealant that is designed for the locking and sealing of metal pipes and fittings, as well as other threaded assemblies. The sealant works by filling the space between threaded parts and seals whilst locking at the same time.
Features and Benefits
• Provides an instant, low-pressure seal for metal pipes and fittings
• Will not creep, shrink or shred and has excellent chemical and thermal resistance, offering less migration of liquid product after application
• Ensures high strength on contaminated surfaces and high performance on passive metals without an activator
Typical Applications
• For straight/straight and straight/taper threads and fittings
LOCTITE® 270 is a high-strength threadlocker that results in maximum efficacy when securing and sealing of bolts, nuts and studs.
Features and Benefits
• Prevents loosening due to vibration and serves to permanently lock assemblies which must not come loose
• Works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• Tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
Typical Applications
• Assembly
• Metal work
Easy break, smooth consistency, lead-free jointing compounds. Can be used to seal threaded connections as well as flat- faced joints and with or without a gasket, depending upon the design of the assembly.
Features and Benefits
• Resistant to commonly used fuels, lubricants and coolants
• Non corrosive and free from abrasive fillers
Type 'A'
• Thin consistency, for small joints which are new or undamaged.
Type 'B'
• Thick consistency, for use on uneven surfaces.
Medium strength, For fine threaded fittings (up to 3/4 BSP). Used in hydraulic and pneumatic installations. Drinking water WRAS approved.
Features:
• Instant low-pressure seal
• Resistant to fuel, oil, coolants and hydraulic fluids
• Locks connection against vibration loosening
Maximum pipe size: 3/4".
Comment: for small fine threaded metal fittings, especially hydraulic fittings.
LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws.
Features and Benefits
• Can be easily applied to small fasteners and will lock and seal out moisture, but can also be gently removed with the same hand tool use to assemble the fasteners
• Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass
• The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• Tolerant of minor contamination from industrial oils including engine oils, corrosion prevention oils and cutting fluids
Typical Applications
• Oil industry
Highly resistant to steam and hot water and automotive fluids. Inhibits galvanic corrosion between dissimilar metals. Operating temperature range: -40 to 250°C.
Available in 40ml and 80ml tubes.
LOCTITE® 603 is a high strength retaining compound that has a high oil tolerance and is ideal for sintered bearings.
Features and Benefits
• High strength formulation means the retaining compound is ideal for use on close-fitting cylindrical parts
• This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration
Typical Applications
• Manufacturing
Approvals
• NSF
Threadsealer for all coarse metal threads. Slow cure allows for adjusting the alignment of valves and fittings.
Offers a breakaway torque of 7 Nm.
Features and Benefits
• Designed for the locking and sealing of metal pipes and fittings
• Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration
• The thixotropic nature of LOCTITE® 572 reduces the migration of liquid product after application to the substrate
Notes
• Maximum pipe size: 3 in.
• Comment: for metal coarse threads, slow curing, low strength.
LOCTITE® 648 is a high strength retaining compound that has high temperature resistance and is ideal for the retention of parts with a clearance or interference fit.
Features and Benefits
• High strength formulation means the retaining compound is ideal for use on cylindrical fitting parts
• This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration
• Exhibits a robust curing performance and also works on passive substrates
• Offers high-temperature performance and good oil tolerance
Typical Applications
• Manufacturing
Highly durable Nitrile 'O' Ring Service Kits, available in Imperial and Metric sizings.
Features and Benefits
• Supplied in a durable storage box with sunken cavities for the simple location of the correct sized rings
Size range
• Inch kit: 1/8" - 2".
• Metric kit: 3mm - 50mm
Standards Met
• Inch 'O' Rings manufactured to BS1806
• Metric 'O' Rings manufactured to DIN7715
LOCTITE® 55 are thread sealing cords that are designed to seal off metal and plastic pipes and fittings.
Features and Benefits
•It needs no cure time and results in an immediate, full pressure seal
•The product is quick and easy to apply and allows for reliable readjustments
Typical Applications
•Thread sealing
•Gas fitting
•Food equipment
Notes
•The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61
High quality integral tip packing extractors, strong yet flexible for maximum effectiveness.
Features and Benefits
• Hardened and tempered steel screws designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions
Notes
• Type 'TRACC' have an integral tip corkscrew tip
• Type 'TRACR' have replaceable tips for extended life
LOCTITE® SI 5980 is a class-leading flange sealant designed especially for gasketing applications. It withstands in-line, low-pressure tests carried out after assembly of the flanges. Typical applications include stamped sheet metal covers (timing gear covers and oil sumps) where good oil resistance and the ability to withstand high joint movement is required. The product has leading health and safety features.
Features and Benefits
• Flange Sealant - excellent adhesive strength. Ideal for applications involving large gaps. Label-free. Excellent resistance against oil
• Flange sealant for flexible flanges
• Good glycol resistance
• Excellent oil resistant
• Leading in health & safety features
Use in place of conventional gaskets. Very flexibile. Good gap fill and water glycol resistance. No hazard symbols, no risk phrases. White Material Safety Data Sheet - no need for COSHH assessment.
Features and Benefits
• Highly flexible
• Excellent gap filling properties
• Water glycol resistant
Notes
• Strength: flexible
• Colour: grey
• Temperature: -55 to +200°C
• Comment: flange sealant, water- and glycol-resistant, no safety labelling
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant that is ideal for use on coarse metal threads
Features and Benefits
• Provides an instant low pressure seal that doesn't creep, shrink or block systems
• Cures in the absence of air and by contact with metals when confined within threads up to M80/R3"
• Thixotropic and high/very high viscosity and is single component, so clean and easy to apply
Approvals:
• UL approved
High strength, low viscosity, green, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring. LOCTITE 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces.
Features and Benefits
• Steel fixture time of 10 min, brass 4 min and stainless steel 25 min
• Tolerates slight contaminations of industrial oils
• Suitable for all metal fasteners
• Fluoresces under UV light
Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling. Loctite® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations.
Features and Benefits
• High strength formulation means the retaining compound is ideal for use on close-fitting cylindrical parts
• This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration
Typical Applications
• Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings
Notes
• Colour: Yellow
• Temperature range: -55 to 150°C
Designed for the locking and sealing of threaded fasteners. Eliminates the need to disassemble prior to application. Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Fill porosity in welds, castings and powdered metal parts.
Features and Benefits
• High strength, low viscosity
• Wicks into threads
• Can be applied after assembly
Benefits:
• Rapid bond strength development.
• Easy to apply thixotropic paste.
• Conforms to BS6209
Areas for Use:
• Bonding PVC and ABS non pressure pipes to themselves and each other.
• PVC Soil and ventilating pipes, fittings and accessories conforming to BS4514.
• PVC rainwater piping/goods conforming to BS4576.
• PVC underground drainpipes and fittings conforming to BSBS4660.
• ABS and PVC waste pipes and fitting conforming to BS5255
• Bonding upvc window trim.
Use in place of conventional gaskets. Very flexibile. Good gap fill and temperature resistance up to 300°C. No hazard symbols, no risk phrases.
Features and Benefits
• Highly flexible
• Excellent gap filling properties
• Temperature resistant
Notes
• Strength: flexible
• Colour: copper
• Temperature: -55 to +300°C
• Comment: flange sealant, high temperature resistant, no safety labelling
LOCTITE® 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration. It is a general purpose threadlocker that provides a medium strength bond. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses.
Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces).
Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
Permits disassembly with hand tools for servicing.
P1 NSF Reg. No.: 123000
Specifications: Brand LOCTITE MPN 1335884 Unit Of Measure 50 Milliliters
General purpose gaps up to 0,25mm. Temperature up to 150°C. Use on rigid metals parts.
Seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
Features and Benefits
• Rigid bond strength
• Temperature effective, from -55 to +150°C
Typical Uses
• For machined, rigid metal flanges - general purpose
Flexible anaerobic gasket. High adhesion. Tolerant to oil contaminated surfaces.
Features and Benefits
• Highly adhesive
• Designed for use on rigid metal flanged connections
• Tolerant to oil and chemicals
Niotes
Strength: semi-rigid
Comment: for machined, rigid metal flanges - highly flexible.
A highly versatile and portable kit packed in a strong plastic case, containing all the necessary items for simple and fast on-the-spot production of any size static O-ring - required in sealing applications for maintenance or prototype use.
If further instant adhesive is required, we recommend the use of Loctite 406 Rapid cure adhesive for rubber.
Features and Benefits
• Each kit is supplied in a fitted and highly durable blow moulded case
• O-ring is ready for light mechanical duties after just 30 seconds
Contents
• Includes a cutting and gluing jig, retractable snap-off safety knife, 3m/10ft tape measure, one bottle of instant adhesive and all popular metric and inch sizes from 1.78 - 8mm in 2m lengths.
Notes
• Nitrile Rubber (NBR)
For most applications
Operating range -30°C to +120°C
• Viton Rubber
For high temperature applications and where greater tolerance to fuel oils is required
Operating range -20°C to +200°C
For making replacement O-rings on the spot, easy to handle, ready for use in just a second.
Kit contains: seven standard diameter sizes of nitrile cord in 1200mm lengths, splicing jig, safety knife and Loctite® 406 instant adhesive (one or two bottles).
Gap fill: 0.05mm.
Colour: clear.
Temperature: -40 to +120°C.
Comment: kit including Loctite® 406 and lengths of various diameters of nitrile rubber 'O' ring cord.
Screw Grab Solution, gets the screw out even if its damaged . Amazing
General purpose. No hazard symbols, no risk phrases. White Material Safety Data Sheet - no need for COSHH assessment.
Features and Benefits
• Drinking water WRAS approved
• Oil and vibration resistant
Notes
• Maximum pipe size: 3in.
• Comment: No labelling, white MSDS.
Quad rings - provide lower friction and eliminate the tendency of standard ?O?-rings to ?roll? in the groove. Can also be used on slow rotational applications.
Kit contains a selection of the most popular 30 sizes of Quad rings (X-Rings).
Ideal for repair or maintenance use.
Viton material.
LOCTITE 248 is a general purpose threadlocker with medium bond strength.
Features and Benefits
• Available in a convenient stick format
• This threadlocker secures and seals bolts, nuts and studs to prevent loosening due to vibration
• The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
LOCTITE 268 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose.
Features and Benefits
• It is available in a stick format and easy and effective in overhead applications
• The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces
• It tolerates slight contamination by industrial oils, corrosion prevention oils and cutting fluids
A low strength thread lock for all types of metal threaded fasteners. Prevents fasteners loosening due to vibration and seals against leakage, whilst still allowing easy disassembly of treated parts. Fills gaps up to 0.5mm.
Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress. It is a cylindrical parts supplement, suited to structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit. Specifications: Resin: Urethane Acrylate.Colour: Green.Fixture Speed No Activator: 5 mins.Fixture Speed With Activator: <5 mins.Viscosity: 2500 cps.Gap fill: 0.2mm.Flash Point: >85°C.Shelf Life: 12 months min.Specific Gravity: 1.08.Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 24 hours.Static shear strength: 30 N/mm².
Designed for the permanent locking and sealing of threaded fasteners. Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include the locking and sealing of large bolts and studs (M25 and larger).
Braided from pure Poly Acrylic Nitrile (PAN) impregnated with PTFE, further treated with special lubricants. Gives enhanced performance and extended life even at high shaft speeds and pressures within a wide pH and temperature range. Resistant to general chemicals, solvents, oils, water and steam. Does not contaminate or stain - suitable for use in the food, water and paper industries.
Pressure rating: 100bar.
Rotary speed: 18m/s.
Temperature: -40°C +250°C.
pH range: 2 - 14.
Roll length: 8m.
Gland Packing
We offer an extensive range of square section Gland Packing designed to minimise maintenance costs using the most advance materials. Available in other sizes and materials, please contact your local service centre for more details.
How to determine the correct Gland Packing size
• Measure diameter of shaft.
• Measure inside diameter of gland (or stuffing box).
• Gland ID - Shaft Diameter divide by 2
This figure gives you the cross section of the area to be packed.
• From the table, choose the gland packing with the closest size.
If your figure is in-between, use the next size up.
mm inch
3.2 1/8"
5.0 3/16"
6.5 1/4"
8.0 5/16"
9.5 3/8"
10.0 3/8"
11.0 7/16"
12.5 1/2"
14.5 9/16"
16.0 5/8"
19.0 3/4"
20.0 3/4"
22.0 7/8"
25.0 1"
Rocol Gasseal is a non-setting, off-white sealing compound ideal for LPG, natural gas, air and water. Perfect for registered gas installers, it allows immediate pressure testing after assembly and resists vibration, making it a reliable choice for threaded pipe fittings in domestic and industrial gas systems.
Features and Benefits
• Immediate pressure testing after joint assembly
• Compatible with foam leak detectors
• Resists vibration for a secure seal
• Safe on aluminium, brass, copper, steel and zinc
• Suitable for LPG and natural gas systems
Standards
• Independently tested to BS EN 751-2 standards
Non-hardening and non-setting allows for unlimited assembly time.
Features and Benefits
• Vibration-resistant
• Allows metal to metal contact
• Light grade for thickness up to 0.015mm
• Medium grade for thickness up to 0.03mm
Standards Met
• To Rolls Royce specification MSRR 9055. Defence specification DTD 900/4586.
Loctite® 245 is a class-leading medium strength, medium viscosity methacrylate threadlocking adhesive that's perfectly formulated for large threads - up to M80 in size. It's perfect for fasteners that require normal disassembly with standard hand tools (breakaway torque is 13 Nm) and is suitable for metals that include steel, brass and stainless steel.
Features and Benefits
• Medium strength, medium viscosity threadlocking adhesive for large threads
• Intended for fasteners that require normal disassembly with standard hand tools
• Suitable for metals that include steel, brass and stainless steel
Medium strength. No hazard symbols, risk phrases. No need for COSHH assessment. Drinking water WRAS approved.
Features and Benefits
• Formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration
• It works on all metals and passive substrates
• Slight contamination by industrial oils, corrosion prevention oils and cutting fluids is tolerated
• Its key differentiator is the "White" Material Safety Data Sheet
• Does not contain any declarable carcinogens, mutagens or reproductive toxins
Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Specification Resin Dimethacrylate. Colour Yellow. Cure Speed with Activator & lt10 minutes. Cure Speed without Activator & lt15 mins @ 20C. Viscosity & gt50,000 cps. Gap Fill 0.05mm to 0.4mm. Flash Point & gt100C. Shelf Life 12 months @ 20C. Specific Gravity 1.09. Max. Operating Temperature +150C. Cured Performance Full Cure Time 6-12 hours. Typical Breakaway Strength & gt6 to & lt15 N/mm (2). Prevailing Torque & gt3 to & lt 9 N/mm (2). Static Shear Strength & gt5 to & lt15 N/mm (2). Size 50ml.
Precision made hand tool for efficient on-site cutting of circular gaskets from compressed fibre jointings, rubber and cork-elastomer sheet.
Features:
• Readily adjustable for diameters from 20mm (13/16") to 600mm (24").
• Long extension bar available for diameters up to 900mm (35").
• Dual metric/inch calibration.
• Cuts compressed fibre jointings up to 5mm thickness; cork-elastomer to 12mm.
Boxed kit containing main body, extension bar, ten blades, and operating instructions.
Cutting board, long extension bar, and straight edges are available as optional extras.
Hylomar M (previously known as Racing Formula) is an acetone based version of Hylomar Universal Blue. The only noticeable physical difference between the Hylomar M and the original Hylomar Universal Blue is the acetone version exhibits increased adhesive properties when compared to the standard Hylomar Universal Blue. Thus, making it an ideal product for high performance applications. Therefore, it is used by Formula One and NASCAR® race teams. Typical applications include coating of pre-formed gaskets, water and oil pumps, cylinder heads and sumps, inlet manifolds, timing case covers, gear box and transmission components, thread sealing or for use on finely machined surfaces.
A high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal.
Features and Benefits
• Increases the torque capacity of assembled flanges
• Use on rigid metal flanges
• High temperature resistance, up to 200°C
• NSF food approved.
• Firm strength
Loctite® 275 is a green, high strength, high viscosity, thixotropic methacrylate-based threadlocking adhesive. With fixture times on steel of 15 min, brass 7 min and stainless steel 180 min, it is ideal for applications where migration of the adhesive must be prevented.
Features and Benefits
• Can tolerate contamination of industrial oils
• Fluoresces to allow monitoring
Typical Applications
• Suitable for large threads
Notes
• Available in 50ml and 250ml sizes
High strength stud locking adhesive for all types of metal. Rapid fixing time of 15-20 minutes on normal plated, oiled metal surfaces and fixtures. Works on steel, aluminium, stainless steel and zinc.
Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222’s Anaerobic nature allows it to cure only when confined between metal parts. Applications include all small fasteners, where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners etc. Specifications: Resin: DimethacrylateColour: Purple White tintCure speed with Activator: <15 mins @ 20°CCure speed without Activator: 15 minutesViscosity- Brookfield Sp3 @ 20rpm: 1200 cps (thixo), Sp3 @ 20rpm: 5000cpsGap Fill/Max Threadform: 0.5mm/M36Flash Point: >100°CShelf Life: 12 months @ 20°CSpecific Gravity: 1.06 Cured performance: Full Cure Time: 12 hours @ 20°CTypical Strength: ISO 10964: 6Nm M10’sRange of Strength: Breakaway: 4Nm up to 12Nm, Prevailing: 2Nm up to 6 NmDIN 54454 Breakloose: 10Nm max 20NmDIN 54454 Prevailing: 6Nm up to 20Nm
High Strenght. No hazard symbols, no risk phrases. No need for COSHH assessment. Drinking water WRAS approved.
Maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. Serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates. Slight contamination is tolerated. Its key differentiator is the "White" Material Safety Data Sheet. Does not contain any declarable carcinogens, mutagens or reproductive toxins.
Low strength stick. Semi-solid formula, ideal to pre-apply. NSF food approved.
Thread type: coarse.
Maximum pipe size: 3".
Temperature: -55 to +150°C.
Comment: thread sealant stick, for metal threads, ideal for maintenance applications.
Plasti-Coll X10
Meets the requirements of the liquified petroleum industry and for the installation of appliances that use natural gas, propane or butane. Reddish brown in colour. Temperature resistant -40°C to +200°C. Conforms to BS695: Parts 5 & 6 Type 'A' : 1992.
Size: 600g.
B542 Hydraulic Seal is a thixotropic liquid which cures Anaerobically to form an incredibly durable, high pressure seal on all types of threaded couplings - used on low, medium and high pressure lines.
Features and Benefits
• High quality hydraulic sealant
• Ultra-tough seal
• Effective on all types of threaded couplings
Bondloc B243 is an Anaerobic formulation designed to be used on parts in an as received condition, such as those with protective films (oils) etc. Oil tolerant B243 is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance. Specifications: Resin: Mod MethacrylateColour: Blue ThixotropicCure speed: <15 mins @ 20°CViscosity: 1200-1800 thixotropicGap fill: 0.1mmFlash Point: >85°CShelf life: 12 months @ 20°CSpecific gravity: 1.04Max. Operating Temperature: -53°C to + 150°C Cured Performance: Full Cure Time: 24 hoursTypical Breakaway Strength: 12 N/mm²Typical Prevailing Strength: 8-10N/mm²
Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases. It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses. Specifications: Resin: DimethacrylateColour: GreenFixture Speed No Activator: 10 min.Fixture Speed With Activator: 5 min. Viscosity: 500 cpsGap fill: 0.25mmFlash Point: >100°CShelf Life: minimum 12 monthSpecific Gravity: 1.06.Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours.Cure Time with good % of final strength: 2 hoursTypical Breakaway Strength DIN : 40 Nm (25/55)Typical Prevailing Strength DIN : 55 Nm (45/70)Typical Breakaway ISO 10964: 26 Nm (16/36)Typical Prevailing ISO 10964: 36 Nm (22/50)
Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Specifications Resin Dimethacrylate. Colour Brown. Fixture Speed No Activator 10 - 20 mins. Fixture Speed With Activator & lt5 mins. Spindle 2 @ 2.5 rpm 1000 to 2750 cps. Spindle 2 @ 20rpm 400 to 800 cps. Gap fill 0.05mm to 0.25 mm. Flash point & gt100C. Shelf life 2 Years @ 20C. Specific gravity 1.06. Max operating temp -55C to + 150C. Cured Performance Full Cure Time 12 hours. Typical breakway ISO 10964 15 N.m. Typical prevailing ISO 10964 & gt8 N.m. DIN 10964 Breakloose 24 N.m. DIN 10964 Prevailing 15 to 35 N.m. Typical Break and Prevailing 20N.m/15N.m. Bondloc Hydraulic Seal Pneumatic Fittings. Size 50ml.
These B641 medium-strength retainers are specially formulated retaining compounds designed to bond cylindrical fittings while allowing for their disassembly when needed, making them particularly valuable for applications that require regular maintenance or repair.
Features and Benefits
• Medium strength formula provides a secure hold yet allows for disassembly without excessive force, preserving component integrity
• Prevents the relative movement between interfacing parts, enhancing the efficiency of mechanical transmissions
• Fretting corrosion prevention protects against the wear and tear that can occur at the contact points of tight-fitting parts
• Environmental corrosion sealing shields metal surfaces from corrosive elements, prolonging their lifespan
• Consistency in load transmission ensures that mechanical forces are evenly distributed across the bonded area, maintaining the functional performance of the assembly
Loctite Threadlocker 5g Designed to seal all metal nuts, bolts and screws. Prevents loosening, leakage and corrosion.
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
No Brand Boss White Jointing Compound 400g) Not suitable for potable water. OK for natural Gas.
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
LOCTITE 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min.
Features and Benefits
• Fluoresces under UV light to allow monitoring
• Ideal for applications where any migration of the adhesive must be prevented
• Can tolerate slight contaminations of industrial oils
• Suitable for all metal fasteners
For all coarse metal threads, especially for nuclear power plants. Fast cure suitable for applications at low temperature.
Thread type: coarse.
Maximum pipe size: 3".
Temperature: -55 to +150°C.
Comment: for metal coarse threads, especially for nuclear power plants.
NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability. Used in engines and gearboxes, also found in anything from shower heads to an aircraft, garden hoses and pumps etc., They can be used as face to face gasket style seals or as shaft seals and allow both rotary and linear movement. They have a 70 Shore hardness and an operating temperature range of -30°C to +120°C. Highly resistant to many chemicals, petroleum, diesel, LPG etc. All sizes to BS4518. Many other sizes and materials in stock.
A full range of other sizes are also available. Please ask for details.
Retains bearings, even under high rotational loading. Keeps full strength with no fatigue under load stress and has low corrosiveness.
Gorilla All Condition Sealant is a multi-use sealant that’s ideal for all around the home, indoors and out. This sealant is mould and mildew resistant, flexible, and won’t yellow, shrink or crack over time. Plus it's 100% waterproof and can be exposed to shower water or rain in just 30 minutes. To Use: All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than 12mm use a backer rod to fill the gap. Best if applied above 5C Available in White and Clear.
3M™ Manual Guns for 2 Part Cartridges allows for you to accurately mix two packs of adhesive at the right consistency and apply directly to the material.
Features and Benefits
• Designed to dispense 1-1 and 2-1 200 ml duo-pack cartridges
• Two part applicator gun which offers high performance
• Can be used for balanced product dispensing
Liquid thread sealant; replaces hemp, pastes and PTFE tape.
Features and Benefits
• Clean and easy to apply
• Instant low pressure seal
• Conforms with DVGW approval (gas)
• Low strength and easily dismantled, seals and locks in any position
• Contains teflon to prevent galling
Notes
• Coarse Threads
• Fast cure version of 572
These medium-strength flexible gasketing products are specially designed anaerobic sealants that cure in the absence of air between close-fitting metal parts. They are optimal for applications requiring reliable sealing and bonding properties, providing enhanced durability and resistance against mechanical and chemical stresses.
Features and Benefits
• Replaces conventional gaskets, reducing the need for stockpiling various gasket sizes
• Excellent instant seal effectively fills all voids for a robust seal
• No need for retorquing, reducing maintenance time and effort
• High resistance to solvents ensures durability in harsh chemical environments
• High-pressure resistance maintains sealing integrity under extreme pressures
• Quick setting times expedite assembly processes
HG Waterproof For Cotton, Linen, Wool & Mixed Fabric Types 300ml Make cotton waterproof? HG waterproof for textiles waterproofs wool, cotton, linen and all fabrics mixed with them. In addition, it also ensures that these materials become dirt-resistant. This highly concentrated product is very easy to use.
Streetwize Vital Copper Rtv Gasket Makers 85gm Specially designed for 4-cylinder, turbocharged or high-performance engine that requiring a unique RTV Gasket. It is the most advanced, high temperature RTV silicone gasket currently available. It is three times more oil resistant than conventional silicone gasket and eight times more flexible than cut gaskets High Temperature Resistant up to 700oF Safe for all models Guaranteed no leak Sensor Safe Low odour and non-corrosive Excellent oil resistance Permanently flexible and stable at temperature of between -80oF to +700oF (-62oC to +370oC) intermittent Highly resistant to auto and shop fluids. Low volatile formula
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
LOCTITE® SI 5980 is a flange sealant designed especially for gasketing applications. It withstands in-line, low-pressure tests carried out after assembly of the flanges. Typical applications include stamped sheet metal covers (timing gear covers and oil sumps) where good oil resistance and the ability to withstand high joint movement is required. The product has leading health and safety features. Flange sealant for flexible flanges Good glycol resistance Excellent oil resistant Black colour Leading in health & safety features Specifications: Brand LOCTITE MPN 2327036 Unit Of Measure 100 Milliliters Weight (kg) 0.14
Medium strength, medium viscosity thixotropic threadlocking adhesive for metal thread sizes up to M36. LOCTITE® 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE® 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools. Medium strength Medium viscosity Quick fixture time Thixotropic to reduce adhesive migration Specifications: Brand LOCTITE MPN 464295 Unit Of Measure 50 Milliliters Weight (kg) 0.08
LOCTITE® MR 5922 is a black, viscous, solvent-based, slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It is based on resin, isopropanol and fillers. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals and it can be used for the repair of damaged pre-cut gaskets. Extends gasket life Prevents leaks Slow drying Specifically designed to improve the sealing performance of pre-formed gaskets made of cork, metal, plastic, rubber, etc. in non-rigid assemblies Flexible setting Increases the reliability of gasket seals Specifications: Brand LOCTITE MPN 142274 Unit Of Measure 60 Milliliters Weight (kg) 0.06
Superfast sealing product especially developed for sealing pipe connections with relatively coarse threads and flanges. Allows instant start up of fluid systems when threads are tightened up as specified.
Rust-Oleum® LeakSeal® is an easy to use, rubberised protective utility coating designed to fill and seal leaks and cracks.
Features and Benefits
• Provides a water-tight, flexible seal that prevents moisture penetration and corrosion
• Dries to a semi smooth finish - will not sag or drip
• Can be top-coated with latex or oil-based paints
Typical Applications
• Designed to fill and seal leaks and cracks on metal, aluminium, galvanised metal, PVC, concrete, masonry, asphalt/bituminous roofing materials, vinyl siding, fibreglass, and more
Notes
• Colours: transparent, aluminium, black and white
• Size: 500ml
NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and superb durability.
Features and Benefits
• Ultra versatile - they can be used as face to face gasket style seals or as shaft seals and allow both rotary and linear movement
• Incredibly durable, with a 70 Shore hardness and an operating temperature range of -30°C to +120°C
• Highly resistant to many chemicals, petroleum, diesel, LPG etc.
Typical Applications
• Used in engines and gearboxes, also found in anything from shower heads to an aircraft, garden hoses and pumps etc.
Standards
• All sizes to BS1806
Notes
• Many other sizes and materials in stock
Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Inter-braid, lattice construction improves sealing with less gland pressure. For use against oils, water, steam, solvents and general chemicals.
Pressure rating: 80bar.
Rotary speed: 10m/s.
Temperature: -50°C + 250°C.
pH range: 4 - 12.
Roll length: 8m.
Gland Packing
We offer an extensive range of square section Gland Packing designed to minimise maintenance costs using the most advance materials. Available in other sizes and materials, please contact your local service centre for more details.
How to determine the correct Gland Packing size
• Measure diameter of shaft.
• Measure inside diameter of gland (or stuffing box).
• Gland ID - Shaft Diameter divide by 2
This figure gives you the cross section of the area to be packed.
• From the table, choose the gland packing with the closest size.
If your figure is in-between, use the next size up.
mm inch
3.2 1/8"
5.0 3/16"
6.5 1/4"
8.0 5/16"
9.5 3/8"
10.0 3/8"
11.0 7/16"
12.5 1/2"
14.5 9/16"
16.0 5/8"
19.0 3/4"
20.0 3/4"
22.0 7/8"
25.0 1"
With hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions. Type 'TRACC' have and integral tip corkscrew tip, type 'TRACR' have replaceable tips for extended life.
High strength threadlocker which can be used on as received parts and on applications where operating temperatures can reach 200C. It is also ideal for use on plated bolts including the new zinc/trivalent chrome finishes.
Loctite Rear View Mirror Bonder is a unique system for bonding rear-view mirrors and all window mounted aerials. Supplied as a single shot pack, that bonds in 30 seconds with no need for liquid activators. Ideal for any glass to metal application. Size 0.5ml
Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. It will secure all types and sizes of bearings, shafts and cylindrical parts which will require disassembly in the future. It is medium strength and is colour-coded yellow for job identification. Specifications Resin Mod. Dimethacrylate. Colour Yellow. Fixture Speed No Activator 10-15 mins. Fixture Speed With Activator & lt5 mins. Viscosity 400-800 cps. Gap fill 0.2 mm. Flash Point & gt100C. Shelf Life 12 month min. Specific Gravity 1.06. Max Operating Temperature -55C to + 150C. Cured Performance Full Cure Time 12 hours. Static shear strength 12N/mm. ISO 10123 pin/collars range 1-16 N/mm(). Bondloc Bearing Fit Retaining Compound. Size 10ml.
The Dog's B*ll*cks Multipurpose Adhesive & Sealant can be used on almost all interior and exterior projects. It has an advanced hybrid formula, making it waterproof, UV and mould resistant. Will stick and seal to almost any building material, even wet surfaces, making it suitable for nearly every task. From sticking new skirting boards to repairing your leaky gutter, this sealant can do the job of all the other cartridges in your tool bag. It can also be overpainted, used as a gap filler or caulk and is solvent-free.
UniBond Sealant Finishing Tool is easy to use, suitable for smoothing all types of sealant. This handy device gives you the option of several different finishing angles for wall and floor applications.
Direction for use: Apply the sealant to the desired area taking care not to apply too much. Select the desired profile on the Sealant Finishing Tool. Place the tool at the start of the sealant bead with the angled surface pointing towards the direction of travel. Pressing down firmly, move the finishing tool at a uniform rate to achieve the perfect finish. Remove excess sealant from the Sealant Smoother immediately after use with a dry cloth.
J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. J-B Weld Perma-lock High Strength Threadlocker is ideal for heavy-duty applications requiring resistance to severe shock and vibrations. Heating and hand tools are required to separate parts.
These high strength studlocks ensure the integrity of mechanical assemblies by securely locking and sealing bolts, studs, and nuts. Ideal for environments prone to vibration, and corrosion, these adhesives are crucial for automotive, manufacturing, and engineering applications and offer a durable solution, enhancing components' safety and lifespan.
Features and Benefits
• Single-component application makes the stud lock easy and clean to apply
• Reduces the need for mechanical fittings decreasing operational costs
• Chemical resistance allows the studlock to withstand harsh environments
• Rapid cure speed facilitates faster assembly operations
• Effective from -55°C to +180°C
These high-strength retainers are engineered to securely maintain cylindrical machine parts, ensuring durability and precision in the most demanding heavy-duty applications. Each of these anaerobic adhesives is perfect for boosting assembly reliability in bearings, gears, and other critical mechanical components. Their unique formulation is designed to bond permanently, filling gaps and resisting environmental and mechanical stresses to ensure long-lasting strength and performance.
Features and Benefits
• Rapid, permanent bonding sets quickly to prevent slippage
• Enhanced mechanical integrity minimises wear and backlash
• Corrosion resistant to shield against environmental damage
• Eco-friendly composition is safer for both users and the environment
These B542 medium-strength thread sealant offers a reliable solution for locking and sealing metal pipes and fittings, specifically designed to handle the challenges in hydraulic and pneumatic systems. The anaerobic formula ensures a fast cure and medium-strength bonding, making them ideal for fine threads that require durable sealing without compromising ease of disassembly.
Features and Benefits
• Single-component sealant is easy to apply, ensuring a clean process without the need for mixing
• Non-creeping, non-shrinking formula maintains the original fitting dimensions and does not block or disrupt the system operation
• Specially formulated to withstand the rigours of vibration and shock, preventing loosening and leakage
• Corrosion and galling protection safeguards threaded areas from environmental elements and wear, enhancing the longevity of the fittings
These B574 and WL74 instant gasket makers are engineered to form medium-strength, reliable seals on machined and rigid flanges, offering an effective alternative to traditional gaskets. Each of the products is designed for applications requiring immediate pressure resistance and superior chemical resistance.
Features and Benefits
• Single-component system is easy to apply, clean, and efficient without the need for mixing or heating
• Does not creep, shrink, or block systems, maintaining integrity and function of the assembly
• Can be applied to any size of pipe fitting and machined surfaces
• Offers a flexible, reliable alternative to paper, cork, and other gasket materials
• Resistance to vibration and environmental factors, protecting against leaks, corrosion, and mechanical degradation
Notes
• Cure time: 24 hours
Superfoil Pipe Insulation 108067
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Streetwize V-Tech Gasket Makers - 85g Vital Red RTV Vital Red RTV Gasket Makers -85gm
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
Gorilla Waterproof Coat & Seal 473ml Black Gorilla Waterproof Coat & Seal is a flexible, rubberised coating that seals out water, air and moisture. Perfect for repairing leaks, the liquid is easy to apply - you simply brush it, roll it or pour it. The self-levelling formula seals and protects by smoothly covering small gaps and cracks to create a weatherproof, watertight seal. Great for: Roofing, Gutters, Conservatories, Drainage Pipes, Windows, Caravans, External Chimneys
Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
This High Temp Jointing Compound is a specialist sealing product designed to prevent leakage of air or gases from rigid joint faces operating at elevated temperatures. With a performance range optimised between 550°C and 760°C, this compound is suitable for applications where joints are subject to extreme thermal conditions. In optimal conditions, effective sealing can be achieved across a wider temperature range of 200°C to 800°C.
Features and Benefits
• Highly temperature-resistant, providing effective sealing from 200°C to 800°C depending on surface quality
• Excellent adhesion, clings securely to clean, rigid metal surfaces
• Non-combustible and almost odourless
• Simple application, spreads easily and cures in-situ at approximately 100°C
• Easy disassembly and cleaning after service
• Light colour for clean and precise application
