Brand

Rating

Price

Special Offers

Material

Application

Operating Temperature Range

Roll Length

Section

pH Range

Features

Pressure Rating (Bar)

To Suit

Type

High quality integral tip packing extractors, strong yet flexible for maximum effectiveness. 

Features and Benefits
• Hardened and tempered steel screws designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions

Notes
• Type 'TRACC' have an integral tip corkscrew tip
• Type 'TRACR' have replaceable tips for extended life

Manufactured from 100% Type G1 fibre. Constructed from PTFE tape and graphite inter-locked to create a true synergy between these two premier packing materials. VP2 resists all chemicals across the entire Ph range (except Oleum, Aqua, Regia, fuming Nitric Acid and Fluorine), is self lubricating and does not shrink, harden nor dry out.

Pressure rating: 120bar. 
Rotary speed: 25m/s.
Temperature: -200°C  +280°C.
pH range: 0 - 14. 
Roll length: 8m.

Never use the product when maximum temperature and pressure are combined.

Gland Packing
We offer an extensive range of square section Gland Packing designed to minimise maintenance costs using the most advance materials. Available in other sizes and materials, please contact your local service centre for more details.

How to determine the correct Gland Packing size 
 •	Measure diameter of shaft.
 •	Measure inside diameter of gland (or stuffing box).
 •	Gland ID - Shaft Diameter divide by 2
	This figure gives you the cross section of the area to be packed.
 •	From the table, choose the gland packing with the closest size. 
        If your figure is in-between, use the next size up.

	  mm	inch
	3.2	1/8"
	5.0	3/16"
	6.5	1/4"
	8.0	5/16"
	9.5	3/8"
	10.0	3/8"
	11.0	7/16"
	12.5	 1/2"
	14.5	9/16"
	16.0	5/8"
	19.0	3/4"
	20.0	3/4"
	22.0	7/8"
	25.0	1"

Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Inter-braid, lattice construction improves sealing with less gland pressure. For use against oils, water, steam, solvents and general chemicals.

Pressure rating: 80bar.
Rotary speed: 10m/s.
Temperature: -50°C + 250°C.
pH range: 4 - 12.
Roll length: 8m.

Gland Packing
We offer an extensive range of square section Gland Packing designed to minimise maintenance costs using the most advance materials. Available in other sizes and materials, please contact your local service centre for more details.

How to determine the correct Gland Packing size 
 •	Measure diameter of shaft.
 •	Measure inside diameter of gland (or stuffing box).
 •	Gland ID - Shaft Diameter divide by 2
	This figure gives you the cross section of the area to be packed.
 •	From the table, choose the gland packing with the closest size. 
        If your figure is in-between, use the next size up.

	  mm	inch
	3.2	1/8"
	5.0	3/16"
	6.5	1/4"
	8.0	5/16"
	9.5	3/8"
	10.0	3/8"
	11.0	7/16"
	12.5	 1/2"
	14.5	9/16"
	16.0	5/8"
	19.0	3/4"
	20.0	3/4"
	22.0	7/8"
	25.0	1"

Braided from pure Poly Acrylic Nitrile (PAN) impregnated with PTFE, further treated with special lubricants. Gives enhanced performance and extended life even at high shaft speeds and pressures within a wide pH and temperature range. Resistant to general chemicals, solvents, oils, water and steam. Does not contaminate or stain - suitable for use in the food, water and paper industries.

Pressure rating: 100bar.
Rotary speed: 18m/s.
Temperature: -40°C +250°C.
pH range: 2 - 14.
Roll length: 8m.

Gland Packing
We offer an extensive range of square section Gland Packing designed to minimise maintenance costs using the most advance materials. Available in other sizes and materials, please contact your local service centre for more details.

How to determine the correct Gland Packing size 
 •	Measure diameter of shaft.
 •	Measure inside diameter of gland (or stuffing box).
 •	Gland ID - Shaft Diameter divide by 2
	This figure gives you the cross section of the area to be packed.
 •	From the table, choose the gland packing with the closest size. 
        If your figure is in-between, use the next size up.

	  mm	inch
	3.2	1/8"
	5.0	3/16"
	6.5	1/4"
	8.0	5/16"
	9.5	3/8"
	10.0	3/8"
	11.0	7/16"
	12.5	 1/2"
	14.5	9/16"
	16.0	5/8"
	19.0	3/4"
	20.0	3/4"
	22.0	7/8"
	25.0	1"

Type 'TRACR' replaceable tips for an extended life.

With hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions. Type 'TRACC' have and integral tip corkscrew tip, type 'TRACR' have replaceable tips for extended life.

Type VR3
Braided packing, constructed from 100% Grafan yarns, to give truly exceptional capabilities and performance, pure Expanded Graphite Packing. Under compression in the gland, VR3 die-forms and can be merely cut to length and spiralled into the gland. There is no need for individual cut rings. Grafan is self-lubricating and will not shrink nor harden nor dry out in use.

Pressure rating: 200bar.
Rotary speed: 30m/s.
Temperature: -200°C +3000°C (Inert ATM),
-200°C +600°C (In Air).
pH range: 0 - 14.
Roll length: 8m.

Never use the product when maximum temperature and pressure are combined.

Gland Packing
We offer an extensive range of square section Gland Packing designed to minimise maintenance costs using the most advance materials. Available in other sizes and materials, please contact your local service centre for more details.

How to determine the correct Gland Packing size 
 •	Measure diameter of shaft.
 •	Measure inside diameter of gland (or stuffing box).
 •	Gland ID - Shaft Diameter divide by 2
	This figure gives you the cross section of the area to be packed.
 •	From the table, choose the gland packing with the closest size. 
        If your figure is in-between, use the next size up.

	  mm	inch
	3.2	1/8"
	5.0	3/16"
	6.5	1/4"
	8.0	5/16"
	9.5	3/8"
	10.0	3/8"
	11.0	7/16"
	12.5	 1/2"
	14.5	9/16"
	16.0	5/8"
	19.0	3/4"
	20.0	3/4"
	22.0	7/8"
	25.0	1"

Designed and engineered to replace and outlast traditional packings, particularly in abrasive media and high pressure rotary applications. VK1D is a square braided packing inter-braided from KEVLAR® Aramid fibres further reinforced with Inconel wire and impregnated with pure graphite and a corrosion inhibitor. A general purpose, wide-ranging, durable arduous duty packing. For use in rotary, reciprocating and static applications particularly against abrasive fluids, weak chemicals and water. Vulcan VK1D is a high strength valve packing also suitable for plunger pumps, turbines and static seals. Particularly for use against oils, air, water, hot steam and asphalt. 
Pressure rating: 400bar. 
Rotary speed: 12m/s.
Temperature: -100°C +300°C.
pH range: 1 - 13.

Vulcan Type VG1D is square braided from continuous filament, texturized glass fibres reinforced with Inconel wire and impregnated yarn by yarn with pure Graphite powder and a corrosion inhibitor. 

Type VG1D Graphited Glass packing is designed as a substitute to classic Asbestos packing with high-temperature capability. The addition of Inconel wire reinforcement results in a true high-pressure and high-temperature traditional valve packing that has the advantage of being non-asbestos.

- Impregnated Yarn by Yarn with pure Graphite powder and a corrosive inhibitor
- Designed as a substitute to classic Asbestos Packing
- High pressure and high temperature traditional valve packing

This set of four packing extractors is suitable for use with the following packing sizes:
5-6.5mm (3/16??-1/4??)
8-10mm (5/16??-3/8??)
11-16mm (7/16??-5/8??)
20mm + (3/4?? +)

Gland Packing Extractor C -TYPE Set of 4

Type VP2
VP2 packing is manufactured from 100% Type G1 fibre. Constructed from PTFE tape and graphite inter-locked to create a true synergy between these two premier packing materials. VP2 resists all chemicals across the entire Ph range (except Oleum, Aqua, Regia, fuming Nitric Acid and Fluorine), is self lubricating and does not shrink, harden nor dry out.
Pressure rating: 120bar. 
Rotary speed: 25m/s.
Temperature: -200°C  +280°C.
pH range: 0 - 14. 
Roll length: 8m.
Never use the product when maximum temperature and pressure are combined.

VP2 PTFE Graphite Fibre Gland Packing 3/8 x 8m

Type VG2				
Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Inter-braid, lattice construction improves sealing with less gland pressure. For use against oils, water, steam, solvents and general chemicals.
Pressure rating: 80bar.
Rotary speed: 10m/s.
Temperature: -50°C + 250°C.
pH range: 4 - 12.
Roll length: 8m.

VG2 Gland Packing - Pan & Carbon Fibres 5/16 x 8m

Type VT2
Braided from pure Poly Acrylic Nitrile (PAN) impregnated with PTFE, further treated with special lubricants. Gives enhanced performance and extended life even at high shaft speeds and pressures within a wide pH and temperature range. Resistant to general chemicals, solvents, oils, water and steam. Does not contaminate or stain - suitable for use in the food, water and paper industries.
Pressure rating: 100bar.
Rotary speed: 18m/s.
Temperature: -40°C +250°C.
pH range: 2 - 14.
Roll length: 8m.

VT2 Pan Fibre Gland Packing 5/16 x 8m

Replaceable Tips (for Type TRACR) 
With hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult 
positions. Type 'TRACC' have and integral tip corkscrew tip, type 'TRACR' have replaceable tips for extended life.

Replacement Gland Packing Extractor Tip Size-4

Type TRACR - Replaceable Tip
With hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult 
positions. Type 'TRACC' have and integral tip corkscrew tip, type 'TRACR' have replaceable tips for extended life.

Gland Packing Extractor R -TYPE Size-4 (3/4" Plus)

Type VR3
Braided packing, constructed from 100% Grafan yarns, to give truly exceptional capabilities and performance, pure Expanded Graphite Packing. Under compression in the gland, VR3 die-forms and can be merely cut to length and spiralled into the gland. There is no need for individual cut rings. Grafan is self-lubricating and will not shrink nor harden nor dry out in use.
Pressure rating: 200bar.
Rotary speed: 30m/s.
Temperature: -200°C +3000°C (Inert ATM),
-200°C +600°C (In Air).
pH range: 0 - 14.
Roll length: 8m.
Never use the product when maximum temperature and pressure are combined.

VR3 Grafan Fibre Gland Packing 1/4 x 8m

Type VK4
Manufactured from KEVLAR Aramid fibres. VK4 is specially treated with a high concentration of resilient, food quality lubricants and heavy PTFE dispersion. VK4, KEVLAR Aramid fibre lube packing, is a durable, economic general service packing for 80% of plant needs. Non-staining lubrication and resilient performance make VK4 ideal for use in the paper industry.
Pressure rating: 150bar. 
Rotary speed: 20m/s.
Temperature: -100°C +280°C.
pH range: 1 - 13. 
Roll length: 8m.
Never use the product when maximum temperature and pressure are combined.

VK4 PTFE Kevlar Fibre Gland Packing 3/8 x 8m

Designed and engineered to replace and outlast traditional packings, particularly in abrasive media and high pressure rotary applications. VK1D is a square braided packing inter-braided from KEVLAR® Aramid fibres further reinforced with Inconel wire and impregnated with pure graphite and a corrosion inhibitor. A general purpose, wide-ranging, durable arduous duty packing. For use in rotary, reciprocating and static applications particularly against abrasive fluids, weak chemicals and water. Vulcan VK1D is a high strength valve packing also suitable for plunger pumps, turbines and static seals. Particularly for use against oils, air, water, hot steam and asphalt. 
Pressure rating: 400bar. 
Rotary speed: 12m/s.
Temperature: -100°C +300°C.
pH range: 1 - 13.

VK1D Gland Packing Kevlar Fibre Graphited 9/16 x 8m

Vulcan Type VG1D is square braided from continuous filament, texturized glass fibres reinforced with Inconel wire and impregnated yarn by yarn with pure Graphite powder and a corrosion inhibitor. 

Type VG1D Graphited Glass packing is designed as a substitute to classic Asbestos packing with high-temperature capability. The addition of Inconel wire reinforcement results in a true high-pressure and high-temperature traditional valve packing that has the advantage of being non-asbestos.

- Impregnated Yarn by Yarn with pure Graphite powder and a corrosive inhibitor
- Designed as a substitute to classic Asbestos Packing
- High pressure and high temperature traditional valve packing

VG1D Gland Packing Glass Fibre & Graphited 1/8 x 8m

Vulcan VG1L is an alternative packing for light duties. VG1L is interbraided from continuous filament, textured air-blown glass fibres thoroughly impregnated with mineral oil lubricants and graphite. A dressing and corrosion inhibitor is further applied to the yarn to improve wear resistance.

Type VG1L will handle non-mechanically demanding Plant Applications whilst requiring low gland pressure to seal thus reducing shaft wear and gland maintenance. Specify Type VG1L for general plant service, at elevated temperatures, only if Carbon or Graphite fibres are not required. Glass fibres offer exceptional temperature resistance but are relatively low strength.

- Thoroughly impregnated with Mineral Oil lubricants and Graphite
- Suited to general purpose packing for rotary and reciprocating pumps, mixers and valves.
- Reduces Shaft wear and gland maintenance

Our Official Vulcan Seals Product Range

We suggest upgrading to Chrome